From: Michael Schmitz <schmitzmic@gmail.com>
To: linux-m68k@vger.kernel.org
Cc: geert@linux-m68k.org, debian-68k@lists.debian.org,
kernel@mkarcher.dialup.fu-berlin.de,
Michael Schmitz <schmitzmic@gmail.com>
Subject: [PATCH 8/8] ax88796: use interrupt status callback for XSurf100 driver
Date: Tue, 17 Nov 2015 12:33:17 +1300 [thread overview]
Message-ID: <1447716797-20906-9-git-send-email-schmitzmic@gmail.com> (raw)
In-Reply-To: <1447716797-20906-1-git-send-email-schmitzmic@gmail.com>
Make use of the ax88796 platform data interupt status hook in the
m68k Amiga XSurf100 driver. The XSurf100 interrupt is shared with
other Amiga hardware interrupts so ei_interrupt would otherwise
get called a lot without need.
Signed-off-by: Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de>
Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
---
drivers/net/ethernet/8390/xsurf100.c | 42 +++++++++++++++++++++++++++------
1 files changed, 34 insertions(+), 8 deletions(-)
diff --git a/drivers/net/ethernet/8390/xsurf100.c b/drivers/net/ethernet/8390/xsurf100.c
index 3c34b04..f1b1f62 100644
--- a/drivers/net/ethernet/8390/xsurf100.c
+++ b/drivers/net/ethernet/8390/xsurf100.c
@@ -7,27 +7,49 @@
#define ZORRO_PROD_INDIVIDUAL_COMPUTERS_X_SURF100 ZORRO_ID(INDIVIDUAL_COMPUTERS, 0x64, 0)
-#define XS1000_8390_BASE 0x800
+#define XS100_IRQSTATUS_BASE 0x40
+#define XS100_8390_BASE 0x800
+
+struct xsurf100_ax_plat_data {
+ struct ax_plat_data ax;
+ void *base_regs;
+};
+
+static int is_xsurf100_network_irq(struct platform_device *pdev)
+{
+ struct xsurf100_ax_plat_data *xs100 = dev_get_platdata(&pdev->dev);
+ return (readw(xs100->base_regs + XS100_IRQSTATUS_BASE) & 0xaaaa) != 0;
+}
static int xsurf100_probe(struct zorro_dev *zdev, const struct zorro_device_id *ent)
{
struct platform_device *pdev;
- struct ax_plat_data ax88796_data;
+ struct xsurf100_ax_plat_data ax88796_data;
struct resource res[2] = {
DEFINE_RES_IRQ(IRQ_AMIGA_PORTS),
- DEFINE_RES_IO(zdev->resource.start + XS1000_8390_BASE, 4 * 0x20)
+ DEFINE_RES_IO(zdev->resource.start + XS100_8390_BASE, 4 * 0x20)
};
int reg;
u32 reg_offsets[32];
+ if (!request_mem_region(zdev->resource.start, 0x100, zdev->name))
+ {
+ dev_err(&zdev->dev, "cannot reserve X-Surf 100 control registers\n");
+ return -ENXIO;
+ }
+
for (reg = 0; reg < 0x20; reg++)
reg_offsets[reg] = 4;
- ax88796_data.flags = AXFLG_HAS_EEPROM;
- ax88796_data.wordlength = 2;
- ax88796_data.dcr_val = 0x48;
- ax88796_data.rcr_val = 0x40;
- ax88796_data.reg_offsets = reg_offsets;
+ memset(&ax88796_data, 0, sizeof ax88796_data);
+ ax88796_data.ax.flags = AXFLG_HAS_EEPROM;
+ ax88796_data.ax.wordlength = 2;
+ ax88796_data.ax.dcr_val = 0x48;
+ ax88796_data.ax.rcr_val = 0x40;
+ ax88796_data.ax.reg_offsets = reg_offsets;
+ ax88796_data.ax.check_irq = is_xsurf100_network_irq;
+ ax88796_data.base_regs = ioremap(zdev->resource.start, 0x100);
+
// TODO: xsurf100 specific accelerated data exchange
@@ -44,8 +66,12 @@ static int xsurf100_probe(struct zorro_dev *zdev, const struct zorro_device_id *
static void xsurf100_remove(struct zorro_dev *zdev)
{
struct platform_device *pdev;
+ struct xsurf100_ax_plat_data *xs100;
pdev = zorro_get_drvdata(zdev);
+ xs100 = dev_get_platdata(&pdev->dev);
+ iounmap(xs100->base_regs);
+ release_mem_region(zdev->resource.start, 0x100);
platform_device_unregister(pdev);
}
--
1.7.0.4
next prev parent reply other threads:[~2015-11-16 23:33 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-16 23:33 [PATCH 0/8] Amiga XSurf100 patch series, to be submitted to linux-net Michael Schmitz
2015-11-16 23:33 ` [PATCH 1/8] aX88796: Fix MAC address reading Michael Schmitz
2015-11-16 23:33 ` [PATCH 2/8] ax88796: Attach MII bus only when open Michael Schmitz
2015-11-16 23:33 ` [PATCH 3/8] ax88796: Move mii support functions upwards to prevent need of forward declaration Michael Schmitz
2015-11-16 23:33 ` [PATCH 4/8] ax88796: Do not free IRQ that did not get requested Michael Schmitz
2015-11-16 23:33 ` [PATCH 5/8] ax88796: Add block_input/output hooks to ax_plat_data Michael Schmitz
2015-11-16 23:33 ` [PATCH 6/8] ax88796: add interrupt status callback to platform data Michael Schmitz
2015-11-16 23:33 ` [PATCH 7/8] ax88796: Add X-Surf 100 zorro driver providing an ax88796 platform device Michael Schmitz
2015-11-17 8:16 ` Geert Uytterhoeven
2015-11-17 17:59 ` Michael Karcher
2015-11-17 20:01 ` Geert Uytterhoeven
2015-11-16 23:33 ` Michael Schmitz [this message]
2015-11-17 8:18 ` [PATCH 0/8] Amiga XSurf100 patch series, to be submitted to linux-net Geert Uytterhoeven
2015-11-17 18:16 ` Michael Karcher
2015-11-17 20:02 ` Geert Uytterhoeven
2015-11-18 1:52 ` Michael Schmitz
2015-11-18 8:09 ` Geert Uytterhoeven
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1447716797-20906-9-git-send-email-schmitzmic@gmail.com \
--to=schmitzmic@gmail.com \
--cc=debian-68k@lists.debian.org \
--cc=geert@linux-m68k.org \
--cc=kernel@mkarcher.dialup.fu-berlin.de \
--cc=linux-m68k@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox