From: Finn Thain <fthain@telegraphics.com.au>
To: "James E.J. Bottomley" <JBottomley@parallels.com>
Cc: Michael Schmitz <schmitzmic@gmail.com>,
Sam Creasey <sammy@sammy.net>,
linux-m68k@vger.kernel.org, Russell King <linux@arm.linux.org.uk>,
linux-scsi@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 10/37] ncr5380: Fix SCSI_IRQ_NONE bugs
Date: Wed, 12 Nov 2014 16:11:56 +1100 [thread overview]
Message-ID: <20141112051148.875461007@telegraphics.com.au> (raw)
In-Reply-To: 20141112051146.525489687@telegraphics.com.au
[-- Attachment #1: ncr5380-SCSI_IRQ_NONE-fixes --]
[-- Type: text/plain, Size: 17358 bytes --]
Oak scsi doesn't use any IRQ, but it sets irq = IRQ_NONE rather than
SCSI_IRQ_NONE. Problem is, the core NCR5380 driver expects SCSI_IRQ_NONE
if it is to issue IDENTIFY commands that prevent target disconnection.
And, as Geert points out, IRQ_NONE is part of enum irqreturn.
Other drivers, when they can't get an IRQ or can't use one, will set
host->irq = SCSI_IRQ_NONE (that is, 255). But when they exit they will
attempt to free IRQ 255 which was never requested.
Fix these bugs by using NO_IRQ in place of SCSI_IRQ_NONE and IRQ_NONE.
That means IRQ 0 is no longer probed by ISA drivers but I don't think
this matters.
Setting IRQ = 255 for these ISA drivers is understood to mean no IRQ.
This remains supported so as to avoid breaking existing ISA setups (which
can be difficult to get working) and because existing documentation
(SANE, TLDP etc) describes this usage for the ISA NCR5380 driver options.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
---
Changes since v1:
- Define NO_IRQ macro and use that instead of IRQ_NONE.
---
drivers/scsi/NCR5380.c | 12 ++++++------
drivers/scsi/NCR5380.h | 5 ++++-
drivers/scsi/arm/oak.c | 2 +-
drivers/scsi/dmx3191d.c | 7 ++++---
drivers/scsi/dtc.c | 22 +++++++++++++---------
drivers/scsi/g_NCR5380.c | 18 +++++++++++-------
drivers/scsi/mac_scsi.c | 8 ++++----
drivers/scsi/pas16.c | 20 +++++++++++---------
drivers/scsi/sun3_scsi.c | 6 +++---
drivers/scsi/t128.c | 14 +++++++++-----
10 files changed, 66 insertions(+), 48 deletions(-)
Index: linux/drivers/scsi/dtc.c
===================================================================
--- linux.orig/drivers/scsi/dtc.c 2014-11-12 16:10:59.000000000 +1100
+++ linux/drivers/scsi/dtc.c 2014-11-12 16:11:02.000000000 +1100
@@ -254,31 +254,35 @@ found:
else
instance->irq = NCR5380_probe_irq(instance, DTC_IRQS);
+ /* Compatibility with documented NCR5380 kernel parameters */
+ if (instance->irq == 255)
+ instance->irq = NO_IRQ;
+
#ifndef DONT_USE_INTR
/* With interrupts enabled, it will sometimes hang when doing heavy
* reads. So better not enable them until I finger it out. */
- if (instance->irq != SCSI_IRQ_NONE)
+ if (instance->irq != NO_IRQ)
if (request_irq(instance->irq, dtc_intr, 0,
"dtc", instance)) {
printk(KERN_ERR "scsi%d : IRQ%d not free, interrupts disabled\n", instance->host_no, instance->irq);
- instance->irq = SCSI_IRQ_NONE;
+ instance->irq = NO_IRQ;
}
- if (instance->irq == SCSI_IRQ_NONE) {
+ if (instance->irq == NO_IRQ) {
printk(KERN_WARNING "scsi%d : interrupts not enabled. for better interactive performance,\n", instance->host_no);
printk(KERN_WARNING "scsi%d : please jumper the board for a free IRQ.\n", instance->host_no);
}
#else
- if (instance->irq != SCSI_IRQ_NONE)
+ if (instance->irq != NO_IRQ)
printk(KERN_WARNING "scsi%d : interrupts not used. Might as well not jumper it.\n", instance->host_no);
- instance->irq = SCSI_IRQ_NONE;
+ instance->irq = NO_IRQ;
#endif
#if defined(DTCDEBUG) && (DTCDEBUG & DTCDEBUG_INIT)
printk("scsi%d : irq = %d\n", instance->host_no, instance->irq);
#endif
printk(KERN_INFO "scsi%d : at 0x%05X", instance->host_no, (int) instance->base);
- if (instance->irq == SCSI_IRQ_NONE)
+ if (instance->irq == NO_IRQ)
printk(" interrupts disabled");
else
printk(" irq %d", instance->irq);
@@ -350,7 +354,7 @@ static inline int NCR5380_pread(struct S
i = 0;
NCR5380_read(RESET_PARITY_INTERRUPT_REG);
NCR5380_write(MODE_REG, MR_ENABLE_EOP_INTR | MR_DMA_MODE);
- if (instance->irq == SCSI_IRQ_NONE)
+ if (instance->irq == NO_IRQ)
NCR5380_write(DTC_CONTROL_REG, CSR_DIR_READ);
else
NCR5380_write(DTC_CONTROL_REG, CSR_DIR_READ | CSR_INT_BASE);
@@ -401,7 +405,7 @@ static inline int NCR5380_pwrite(struct
NCR5380_read(RESET_PARITY_INTERRUPT_REG);
NCR5380_write(MODE_REG, MR_ENABLE_EOP_INTR | MR_DMA_MODE);
/* set direction (write) */
- if (instance->irq == SCSI_IRQ_NONE)
+ if (instance->irq == NO_IRQ)
NCR5380_write(DTC_CONTROL_REG, 0);
else
NCR5380_write(DTC_CONTROL_REG, CSR_5380_INTR);
@@ -440,7 +444,7 @@ static int dtc_release(struct Scsi_Host
{
NCR5380_local_declare();
NCR5380_setup(shost);
- if (shost->irq)
+ if (shost->irq != NO_IRQ)
free_irq(shost->irq, shost);
NCR5380_exit(shost);
if (shost->io_port && shost->n_io_port)
Index: linux/drivers/scsi/pas16.c
===================================================================
--- linux.orig/drivers/scsi/pas16.c 2014-11-12 16:10:59.000000000 +1100
+++ linux/drivers/scsi/pas16.c 2014-11-12 16:11:02.000000000 +1100
@@ -62,13 +62,11 @@
* If you have problems with your card not being recognized, use
* the LILO command line override. Try to get it recognized without
* interrupts. Ie, for a board at the default 0x388 base port,
- * boot: linux pas16=0x388,255
+ * boot: linux pas16=0x388,0
*
- * SCSI_IRQ_NONE (255) should be specified for no interrupt,
+ * NO_IRQ (0) should be specified for no interrupt,
* IRQ_AUTO (254) to autoprobe for an IRQ line if overridden
* on the command line.
- *
- * (IRQ_AUTO == 254, SCSI_IRQ_NONE == 255 in NCR5380.h)
*/
#include <linux/module.h>
@@ -416,15 +414,19 @@ static int __init pas16_detect(struct sc
else
instance->irq = NCR5380_probe_irq(instance, PAS16_IRQS);
- if (instance->irq != SCSI_IRQ_NONE)
+ /* Compatibility with documented NCR5380 kernel parameters */
+ if (instance->irq == 255)
+ instance->irq = NO_IRQ;
+
+ if (instance->irq != NO_IRQ)
if (request_irq(instance->irq, pas16_intr, 0,
"pas16", instance)) {
printk("scsi%d : IRQ%d not free, interrupts disabled\n",
instance->host_no, instance->irq);
- instance->irq = SCSI_IRQ_NONE;
+ instance->irq = NO_IRQ;
}
- if (instance->irq == SCSI_IRQ_NONE) {
+ if (instance->irq == NO_IRQ) {
printk("scsi%d : interrupts not enabled. for better interactive performance,\n", instance->host_no);
printk("scsi%d : please jumper the board for a free IRQ.\n", instance->host_no);
/* Disable 5380 interrupts, leave drive params the same */
@@ -438,7 +440,7 @@ static int __init pas16_detect(struct sc
printk("scsi%d : at 0x%04x", instance->host_no, (int)
instance->io_port);
- if (instance->irq == SCSI_IRQ_NONE)
+ if (instance->irq == NO_IRQ)
printk (" interrupts disabled");
else
printk (" irq %d", instance->irq);
@@ -568,7 +570,7 @@ static inline int NCR5380_pwrite (struct
static int pas16_release(struct Scsi_Host *shost)
{
- if (shost->irq)
+ if (shost->irq != NO_IRQ)
free_irq(shost->irq, shost);
NCR5380_exit(shost);
if (shost->io_port && shost->n_io_port)
Index: linux/drivers/scsi/t128.c
===================================================================
--- linux.orig/drivers/scsi/t128.c 2014-11-12 16:10:59.000000000 +1100
+++ linux/drivers/scsi/t128.c 2014-11-12 16:11:02.000000000 +1100
@@ -228,15 +228,19 @@ found:
else
instance->irq = NCR5380_probe_irq(instance, T128_IRQS);
- if (instance->irq != SCSI_IRQ_NONE)
+ /* Compatibility with documented NCR5380 kernel parameters */
+ if (instance->irq == 255)
+ instance->irq = NO_IRQ;
+
+ if (instance->irq != NO_IRQ)
if (request_irq(instance->irq, t128_intr, 0, "t128",
instance)) {
printk("scsi%d : IRQ%d not free, interrupts disabled\n",
instance->host_no, instance->irq);
- instance->irq = SCSI_IRQ_NONE;
+ instance->irq = NO_IRQ;
}
- if (instance->irq == SCSI_IRQ_NONE) {
+ if (instance->irq == NO_IRQ) {
printk("scsi%d : interrupts not enabled. for better interactive performance,\n", instance->host_no);
printk("scsi%d : please jumper the board for a free IRQ.\n", instance->host_no);
}
@@ -246,7 +250,7 @@ found:
#endif
printk("scsi%d : at 0x%08lx", instance->host_no, instance->base);
- if (instance->irq == SCSI_IRQ_NONE)
+ if (instance->irq == NO_IRQ)
printk (" interrupts disabled");
else
printk (" irq %d", instance->irq);
@@ -265,7 +269,7 @@ static int t128_release(struct Scsi_Host
{
NCR5380_local_declare();
NCR5380_setup(shost);
- if (shost->irq)
+ if (shost->irq != NO_IRQ)
free_irq(shost->irq, shost);
NCR5380_exit(shost);
if (shost->io_port && shost->n_io_port)
Index: linux/drivers/scsi/NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/NCR5380.c 2014-11-12 16:10:57.000000000 +1100
+++ linux/drivers/scsi/NCR5380.c 2014-11-12 16:11:02.000000000 +1100
@@ -574,12 +574,12 @@ static int __init __maybe_unused NCR5380
int trying_irqs, i, mask;
NCR5380_setup(instance);
- for (trying_irqs = i = 0, mask = 1; i < 16; ++i, mask <<= 1)
+ for (trying_irqs = 0, i = 1, mask = 2; i < 16; ++i, mask <<= 1)
if ((mask & possible) && (request_irq(i, &probe_intr, 0, "NCR-probe", NULL) == 0))
trying_irqs |= mask;
timeout = jiffies + (250 * HZ / 1000);
- probe_irq = SCSI_IRQ_NONE;
+ probe_irq = NO_IRQ;
/*
* A interrupt is triggered whenever BSY = false, SEL = true
@@ -596,13 +596,13 @@ static int __init __maybe_unused NCR5380
NCR5380_write(OUTPUT_DATA_REG, hostdata->id_mask);
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_DATA | ICR_ASSERT_SEL);
- while (probe_irq == SCSI_IRQ_NONE && time_before(jiffies, timeout))
+ while (probe_irq == NO_IRQ && time_before(jiffies, timeout))
schedule_timeout_uninterruptible(1);
NCR5380_write(SELECT_ENABLE_REG, 0);
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
- for (i = 0, mask = 1; i < 16; ++i, mask <<= 1)
+ for (i = 1, mask = 2; i < 16; ++i, mask <<= 1)
if (trying_irqs & mask)
free_irq(i, NULL);
@@ -730,7 +730,7 @@ static int __maybe_unused NCR5380_show_i
SPRINTF("\nBase Addr: 0x%05lX ", (long) instance->base);
SPRINTF("io_port: %04x ", (int) instance->io_port);
- if (instance->irq == SCSI_IRQ_NONE)
+ if (instance->irq == NO_IRQ)
SPRINTF("IRQ: None.\n");
else
SPRINTF("IRQ: %d.\n", instance->irq);
@@ -1501,7 +1501,7 @@ part2:
}
dprintk(NDEBUG_SELECTION, "scsi%d : target %d selected, going into MESSAGE OUT phase.\n", instance->host_no, cmd->device->id);
- tmp[0] = IDENTIFY(((instance->irq == SCSI_IRQ_NONE) ? 0 : 1), cmd->device->lun);
+ tmp[0] = IDENTIFY(((instance->irq == NO_IRQ) ? 0 : 1), cmd->device->lun);
len = 1;
cmd->tag = 0;
Index: linux/drivers/scsi/NCR5380.h
===================================================================
--- linux.orig/drivers/scsi/NCR5380.h 2014-11-12 16:10:57.000000000 +1100
+++ linux/drivers/scsi/NCR5380.h 2014-11-12 16:11:02.000000000 +1100
@@ -232,12 +232,15 @@
* Scsi_Host structure
*/
-#define SCSI_IRQ_NONE 255
#define DMA_NONE 255
#define IRQ_AUTO 254
#define DMA_AUTO 254
#define PORT_AUTO 0xffff /* autoprobe io port for 53c400a */
+#ifndef NO_IRQ
+#define NO_IRQ 0
+#endif
+
#define FLAG_HAS_LAST_BYTE_SENT 1 /* NCR53c81 or better */
#define FLAG_CHECK_LAST_BYTE_SENT 2 /* Only test once */
#define FLAG_NCR53C400 4 /* NCR53c400 */
Index: linux/drivers/scsi/dmx3191d.c
===================================================================
--- linux.orig/drivers/scsi/dmx3191d.c 2014-11-12 16:10:57.000000000 +1100
+++ linux/drivers/scsi/dmx3191d.c 2014-11-12 16:11:02.000000000 +1100
@@ -100,7 +100,7 @@ static int dmx3191d_probe_one(struct pci
*/
printk(KERN_WARNING "dmx3191: IRQ %d not available - "
"switching to polled mode.\n", pdev->irq);
- shost->irq = SCSI_IRQ_NONE;
+ shost->irq = NO_IRQ;
}
pci_set_drvdata(pdev, shost);
@@ -113,7 +113,8 @@ static int dmx3191d_probe_one(struct pci
return 0;
out_free_irq:
- free_irq(shost->irq, shost);
+ if (shost->irq != NO_IRQ)
+ free_irq(shost->irq, shost);
out_release_region:
release_region(io, DMX3191D_REGION_LEN);
out_disable_device:
@@ -130,7 +131,7 @@ static void dmx3191d_remove_one(struct p
NCR5380_exit(shost);
- if (shost->irq != SCSI_IRQ_NONE)
+ if (shost->irq != NO_IRQ)
free_irq(shost->irq, shost);
release_region(shost->io_port, DMX3191D_REGION_LEN);
pci_disable_device(pdev);
Index: linux/drivers/scsi/g_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/g_NCR5380.c 2014-11-12 16:10:59.000000000 +1100
+++ linux/drivers/scsi/g_NCR5380.c 2014-11-12 16:11:02.000000000 +1100
@@ -312,7 +312,7 @@ static int __init generic_NCR5380_detect
if (pnp_irq_valid(dev, 0))
overrides[count].irq = pnp_irq(dev, 0);
else
- overrides[count].irq = SCSI_IRQ_NONE;
+ overrides[count].irq = NO_IRQ;
if (pnp_dma_valid(dev, 0))
overrides[count].dma = pnp_dma(dev, 0);
else
@@ -432,20 +432,24 @@ static int __init generic_NCR5380_detect
else
instance->irq = NCR5380_probe_irq(instance, 0xffff);
- if (instance->irq != SCSI_IRQ_NONE)
+ /* Compatibility with documented NCR5380 kernel parameters */
+ if (instance->irq == 255)
+ instance->irq = NO_IRQ;
+
+ if (instance->irq != NO_IRQ)
if (request_irq(instance->irq, generic_NCR5380_intr,
0, "NCR5380", instance)) {
printk(KERN_WARNING "scsi%d : IRQ%d not free, interrupts disabled\n", instance->host_no, instance->irq);
- instance->irq = SCSI_IRQ_NONE;
+ instance->irq = NO_IRQ;
}
- if (instance->irq == SCSI_IRQ_NONE) {
+ if (instance->irq == NO_IRQ) {
printk(KERN_INFO "scsi%d : interrupts not enabled. for better interactive performance,\n", instance->host_no);
printk(KERN_INFO "scsi%d : please jumper the board for a free IRQ.\n", instance->host_no);
}
printk(KERN_INFO "scsi%d : at " STRVAL(NCR5380_map_name) " 0x%x", instance->host_no, (unsigned int) instance->NCR5380_instance_name);
- if (instance->irq == SCSI_IRQ_NONE)
+ if (instance->irq == NO_IRQ)
printk(" interrupts disabled");
else
printk(" irq %d", instance->irq);
@@ -486,7 +490,7 @@ static int generic_NCR5380_release_resou
NCR5380_local_declare();
NCR5380_setup(instance);
- if (instance->irq != SCSI_IRQ_NONE)
+ if (instance->irq != NO_IRQ)
free_irq(instance->irq, instance);
NCR5380_exit(instance);
@@ -796,7 +800,7 @@ static int generic_NCR5380_show_info(str
PRINTP("NO NCR53C400 driver extensions\n");
#endif
PRINTP("Using %s mapping at %s 0x%lx, " ANDP STRVAL(NCR5380_map_config) ANDP STRVAL(NCR5380_map_name) ANDP scsi_ptr->NCR5380_instance_name);
- if (scsi_ptr->irq == SCSI_IRQ_NONE)
+ if (scsi_ptr->irq == NO_IRQ)
PRINTP("no interrupt\n");
else
PRINTP("on interrupt %d\n" ANDP scsi_ptr->irq);
Index: linux/drivers/scsi/mac_scsi.c
===================================================================
--- linux.orig/drivers/scsi/mac_scsi.c 2014-11-12 16:10:59.000000000 +1100
+++ linux/drivers/scsi/mac_scsi.c 2014-11-12 16:11:02.000000000 +1100
@@ -229,15 +229,15 @@ int __init macscsi_detect(struct scsi_ho
instance->n_io_port = 255;
- if (instance->irq != SCSI_IRQ_NONE)
+ if (instance->irq != NO_IRQ)
if (request_irq(instance->irq, NCR5380_intr, 0, "ncr5380", instance)) {
printk(KERN_WARNING "scsi%d: IRQ%d not free, interrupts disabled\n",
instance->host_no, instance->irq);
- instance->irq = SCSI_IRQ_NONE;
+ instance->irq = NO_IRQ;
}
printk(KERN_INFO "scsi%d: generic 5380 at port %lX irq", instance->host_no, instance->io_port);
- if (instance->irq == SCSI_IRQ_NONE)
+ if (instance->irq == NO_IRQ)
printk (KERN_INFO "s disabled");
else
printk (KERN_INFO " %d", instance->irq);
@@ -252,7 +252,7 @@ int __init macscsi_detect(struct scsi_ho
int macscsi_release (struct Scsi_Host *shpnt)
{
- if (shpnt->irq != SCSI_IRQ_NONE)
+ if (shpnt->irq != NO_IRQ)
free_irq(shpnt->irq, shpnt);
NCR5380_exit(shpnt);
Index: linux/drivers/scsi/sun3_scsi.c
===================================================================
--- linux.orig/drivers/scsi/sun3_scsi.c 2014-11-12 16:10:59.000000000 +1100
+++ linux/drivers/scsi/sun3_scsi.c 2014-11-12 16:11:02.000000000 +1100
@@ -278,7 +278,7 @@ static int __init sun3scsi_detect(struct
#ifndef REAL_DMA
printk("scsi%d: IRQ%d not free, interrupts disabled\n",
instance->host_no, instance->irq);
- instance->irq = SCSI_IRQ_NONE;
+ instance->irq = NO_IRQ;
#else
printk("scsi%d: IRQ%d not free, bailing out\n",
instance->host_no, instance->irq);
@@ -288,7 +288,7 @@ static int __init sun3scsi_detect(struct
pr_info("scsi%d: %s at port %lX irq", instance->host_no,
tpnt->proc_name, instance->io_port);
- if (instance->irq == SCSI_IRQ_NONE)
+ if (instance->irq == NO_IRQ)
printk ("s disabled");
else
printk (" %d", instance->irq);
@@ -325,7 +325,7 @@ static int __init sun3scsi_detect(struct
static int sun3scsi_release(struct Scsi_Host *shpnt)
{
- if (shpnt->irq != SCSI_IRQ_NONE)
+ if (shpnt->irq != NO_IRQ)
free_irq(shpnt->irq, shpnt);
iounmap((void *)sun3_scsi_regp);
Index: linux/drivers/scsi/arm/oak.c
===================================================================
--- linux.orig/drivers/scsi/arm/oak.c 2014-11-12 16:10:57.000000000 +1100
+++ linux/drivers/scsi/arm/oak.c 2014-11-12 16:11:02.000000000 +1100
@@ -148,7 +148,7 @@ static int oakscsi_probe(struct expansio
goto unreg;
}
- host->irq = IRQ_NONE;
+ host->irq = NO_IRQ;
host->n_io_port = 255;
NCR5380_init(host, 0);
next prev parent reply other threads:[~2014-11-12 5:11 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-12 5:11 [PATCH v3 00/37] Fixes, cleanups and modernization for NCR5380 drivers Finn Thain
2014-11-12 5:11 ` [PATCH v3 01/37] ncr5380: Use printk() not pr_debug() Finn Thain
2014-11-12 5:11 ` [PATCH v3 02/37] ncr5380: Remove unused hostdata fields Finn Thain
2014-11-12 5:11 ` [PATCH v3 03/37] ncr5380: Fix compiler warnings and __setup options Finn Thain
2014-11-12 5:11 ` [PATCH v3 04/37] ncr5380: Remove unused macros Finn Thain
2014-11-12 5:11 ` [PATCH v3 05/37] ncr5380: Remove useless prototypes Finn Thain
2014-11-12 5:11 ` [PATCH v3 06/37] ncr5380: Remove more " Finn Thain
2014-11-12 5:11 ` [PATCH v3 07/37] ncr5380: Cleanup TAG_NEXT and TAG_NONE macros Finn Thain
2014-11-12 5:11 ` [PATCH v3 08/37] ncr5380: Remove redundant AUTOSENSE macro Finn Thain
2014-11-12 5:11 ` [PATCH v3 09/37] ncr5380: Remove duplicate comments Finn Thain
2014-11-12 5:11 ` Finn Thain [this message]
2014-11-12 5:11 ` [PATCH v3 11/37] ncr5380: Remove NCR5380_STATS Finn Thain
2014-11-12 5:11 ` [PATCH v3 12/37] ncr5380: Cleanup host info() methods Finn Thain
2014-11-12 5:11 ` [PATCH v3 13/37] ncr5380: Move static PDMA spin counters to host data Finn Thain
2014-11-12 5:12 ` [PATCH v3 14/37] ncr5380: Remove pointless compiler command line override macros Finn Thain
2014-11-12 5:12 ` [PATCH v3 15/37] ncr5380: Remove *_RELEASE macros Finn Thain
2014-11-12 5:12 ` [PATCH v3 16/37] ncr5380: Drop legacy scsi.h include Finn Thain
2014-11-12 5:12 ` [PATCH v3 17/37] dmx3191d: Use NO_IRQ Finn Thain
2014-11-12 5:12 ` [PATCH v3 18/37] mac_scsi: Remove header Finn Thain
2014-11-12 5:12 ` [PATCH v3 19/37] mac_scsi: Add module option to Kconfig Finn Thain
2014-11-12 5:12 ` [PATCH v3 20/37] mac_scsi: Cleanup PDMA code Finn Thain
2014-11-12 5:12 ` [PATCH v3 21/37] mac_scsi: Convert to platform device Finn Thain
2014-11-12 5:12 ` [PATCH v3 22/37] atari_scsi: Fix atari_scsi deadlocks on Falcon Finn Thain
2014-11-12 5:12 ` [PATCH v3 23/37] atari_scsi: Convert to platform device Finn Thain
2014-11-12 5:12 ` [PATCH v3 24/37] atari_scsi: Remove header Finn Thain
2014-11-12 5:12 ` [PATCH v3 25/37] sun3_scsi: Convert to platform device Finn Thain
2014-11-12 9:17 ` Geert Uytterhoeven
2014-11-12 11:20 ` Finn Thain
2014-11-13 1:21 ` [PATCH v4 " Finn Thain
2014-11-12 5:12 ` [PATCH v3 26/37] sun3_scsi: Move macro definitions Finn Thain
2014-11-12 5:12 ` [PATCH v3 27/37] ncr5380: Remove ENABLE_IRQ/DISABLE_IRQ macros Finn Thain
2014-11-12 5:12 ` [PATCH v3 28/37] atari_NCR5380: Refactor Falcon special cases Finn Thain
2014-11-12 5:12 ` [PATCH v3 29/37] atari_NCR5380: Refactor Falcon locking Finn Thain
2014-11-12 5:12 ` [PATCH v3 30/37] atari_NCR5380: Merge from sun3_NCR5380.c Finn Thain
2014-11-12 5:12 ` [PATCH v3 31/37] sun3_scsi: Adopt atari_NCR5380 core driver and remove sun3_NCR5380.c Finn Thain
2014-11-12 5:12 ` [PATCH v3 32/37] atari_NCR5380: Merge from NCR5380.c Finn Thain
2014-11-12 5:12 ` [PATCH v3 33/37] atari_NCR5380: Introduce FLAG_TAGGED_QUEUING Finn Thain
2014-11-12 5:12 ` [PATCH v3 34/37] atari_NCR5380: Move static TagAlloc array to host data Finn Thain
2014-11-12 5:12 ` [PATCH v3 35/37] atari_NCR5380: Move static co-routine variables " Finn Thain
2014-11-12 5:12 ` [PATCH v3 36/37] atari_NCR5380: Remove RESET_RUN_DONE macro Finn Thain
2014-11-12 5:12 ` [PATCH v3 37/37] atari_NCR5380: Fix "transfered" typo Finn Thain
2014-11-20 15:56 ` [PATCH v3 00/37] Fixes, cleanups and modernization for NCR5380 drivers Christoph Hellwig
2014-11-21 4:21 ` Finn Thain
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20141112051148.875461007@telegraphics.com.au \
--to=fthain@telegraphics.com.au \
--cc=JBottomley@parallels.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-m68k@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=sammy@sammy.net \
--cc=schmitzmic@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox