From: Finn Thain <fthain@telegraphics.com.au>
To: "James E.J. Bottomley" <JBottomley@odin.com>,
"Martin K. Petersen" <martin.petersen@oracle.com>,
Michael Schmitz <schmitzmic@gmail.com>,
linux-m68k@vger.kernel.org, linux-scsi@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v4 09/78] atari_NCR5380: Reset bus on driver initialization if required
Date: Sun, 03 Jan 2016 16:05:10 +1100 [thread overview]
Message-ID: <20160103050503.431805510@telegraphics.com.au> (raw)
In-Reply-To: 20160103050501.042035135@telegraphics.com.au
[-- Attachment #1: atari_NCR5380-merge-do_reset --]
[-- Type: text/plain, Size: 7143 bytes --]
Merge the bus reset code from NCR5380.c into atari_NCR5380.c. This allows
for removal of a lot of duplicated code conditional on the RESET_BOOT
macro (in the next patch).
The atari_NCR5380.c fork lacks the do_reset() and NCR5380_poll_politely()
routines from NCR5380.c, so introduce them. They are indispensible. Keep
the two implementations in sync.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
---
drivers/scsi/NCR5380.c | 33 +++++++-----
drivers/scsi/atari_NCR5380.c | 113 +++++++++++++++++++++++++++++++++++++++++++
2 files changed, 134 insertions(+), 12 deletions(-)
Index: linux/drivers/scsi/NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/NCR5380.c 2016-01-03 16:03:06.000000000 +1100
+++ linux/drivers/scsi/NCR5380.c 2016-01-03 16:03:08.000000000 +1100
@@ -838,19 +838,20 @@ static int NCR5380_maybe_reset_bus(struc
case 1:
case 3:
case 5:
- printk(KERN_INFO "scsi%d: SCSI bus busy, waiting up to five seconds\n", instance->host_no);
- NCR5380_poll_politely(instance, STATUS_REG, SR_BSY, 0, 5*HZ);
+ shost_printk(KERN_ERR, instance, "SCSI bus busy, waiting up to five seconds\n");
+ NCR5380_poll_politely(instance,
+ STATUS_REG, SR_BSY, 0, 5 * HZ);
break;
case 2:
- printk(KERN_WARNING "scsi%d: bus busy, attempting abort\n", instance->host_no);
+ shost_printk(KERN_ERR, instance, "bus busy, attempting abort\n");
do_abort(instance);
break;
case 4:
- printk(KERN_WARNING "scsi%d: bus busy, attempting reset\n", instance->host_no);
+ shost_printk(KERN_ERR, instance, "bus busy, attempting reset\n");
do_reset(instance);
break;
case 6:
- printk(KERN_ERR "scsi%d: bus locked solid or invalid override\n", instance->host_no);
+ shost_printk(KERN_ERR, instance, "bus locked solid\n");
return -ENXIO;
}
}
@@ -1579,21 +1580,29 @@ static int NCR5380_transfer_pio(struct S
}
/**
- * do_reset - issue a reset command
- * @host: adapter to reset
+ * do_reset - issue a reset command
+ * @instance: adapter to reset
*
- * Issue a reset sequence to the NCR5380 and try and get the bus
- * back into sane shape.
+ * Issue a reset sequence to the NCR5380 and try and get the bus
+ * back into sane shape.
*
- * Locks: caller holds queue lock
+ * This clears the reset interrupt flag because there may be no handler for
+ * it. When the driver is initialized, the NCR5380_intr() handler has not yet
+ * been installed. And when in EH we may have released the ST DMA interrupt.
*/
static void do_reset(struct Scsi_Host *instance)
{
- NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(NCR5380_read(STATUS_REG) & PHASE_MASK));
+ unsigned long flags;
+
+ local_irq_save(flags);
+ NCR5380_write(TARGET_COMMAND_REG,
+ PHASE_SR_TO_TCR(NCR5380_read(STATUS_REG) & PHASE_MASK));
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_RST);
- udelay(25);
+ udelay(50);
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
+ (void)NCR5380_read(RESET_PARITY_INTERRUPT_REG);
+ local_irq_restore(flags);
}
/*
Index: linux/drivers/scsi/atari_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/atari_NCR5380.c 2016-01-03 16:02:37.000000000 +1100
+++ linux/drivers/scsi/atari_NCR5380.c 2016-01-03 16:03:08.000000000 +1100
@@ -234,6 +234,9 @@
#define HOSTNO instance->host_no
#define H_NO(cmd) (cmd)->device->host->host_no
+static int do_abort(struct Scsi_Host *);
+static void do_reset(struct Scsi_Host *);
+
#ifdef SUPPORT_TAGS
/*
@@ -475,6 +478,47 @@ static inline void initialize_SCp(struct
}
}
+/**
+ * NCR5380_poll_politely - wait for NCR5380 status bits
+ * @instance: controller to poll
+ * @reg: 5380 register to poll
+ * @bit: Bitmask to check
+ * @val: Value required to exit
+ *
+ * Polls the NCR5380 in a reasonably efficient manner waiting for
+ * an event to occur, after a short quick poll we begin giving the
+ * CPU back in non IRQ contexts
+ *
+ * Returns the value of the register or a negative error code.
+ */
+
+static int NCR5380_poll_politely(struct Scsi_Host *instance,
+ int reg, int bit, int val, int t)
+{
+ int n = 500;
+ unsigned long end = jiffies + t;
+ int r;
+
+ while (n-- > 0) {
+ r = NCR5380_read(reg);
+ if ((r & bit) == val)
+ return 0;
+ cpu_relax();
+ }
+
+ /* t time yet ? */
+ while (time_before(jiffies, end)) {
+ r = NCR5380_read(reg);
+ if ((r & bit) == val)
+ return 0;
+ if (!in_interrupt())
+ cond_resched();
+ else
+ cpu_relax();
+ }
+ return -ETIMEDOUT;
+}
+
#include <linux/delay.h>
#if NDEBUG
@@ -801,6 +845,49 @@ static int __init NCR5380_init(struct Sc
}
/**
+ * NCR5380_maybe_reset_bus - Detect and correct bus wedge problems.
+ * @instance: adapter to check
+ *
+ * If the system crashed, it may have crashed with a connected target and
+ * the SCSI bus busy. Check for BUS FREE phase. If not, try to abort the
+ * currently established nexus, which we know nothing about. Failing that
+ * do a bus reset.
+ *
+ * Note that a bus reset will cause the chip to assert IRQ.
+ *
+ * Returns 0 if successful, otherwise -ENXIO.
+ */
+
+static int NCR5380_maybe_reset_bus(struct Scsi_Host *instance)
+{
+ int pass;
+
+ for (pass = 1; (NCR5380_read(STATUS_REG) & SR_BSY) && pass <= 6; ++pass) {
+ switch (pass) {
+ case 1:
+ case 3:
+ case 5:
+ shost_printk(KERN_ERR, instance, "SCSI bus busy, waiting up to five seconds\n");
+ NCR5380_poll_politely(instance,
+ STATUS_REG, SR_BSY, 0, 5 * HZ);
+ break;
+ case 2:
+ shost_printk(KERN_ERR, instance, "bus busy, attempting abort\n");
+ do_abort(instance);
+ break;
+ case 4:
+ shost_printk(KERN_ERR, instance, "bus busy, attempting reset\n");
+ do_reset(instance);
+ break;
+ case 6:
+ shost_printk(KERN_ERR, instance, "bus locked solid\n");
+ return -ENXIO;
+ }
+ }
+ return 0;
+}
+
+/**
* NCR5380_exit - remove an NCR5380
* @instance: adapter to remove
*
@@ -1741,6 +1828,32 @@ static int NCR5380_transfer_pio(struct S
return -1;
}
+/**
+ * do_reset - issue a reset command
+ * @instance: adapter to reset
+ *
+ * Issue a reset sequence to the NCR5380 and try and get the bus
+ * back into sane shape.
+ *
+ * This clears the reset interrupt flag because there may be no handler for
+ * it. When the driver is initialized, the NCR5380_intr() handler has not yet
+ * been installed. And when in EH we may have released the ST DMA interrupt.
+ */
+
+static void do_reset(struct Scsi_Host *instance)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ NCR5380_write(TARGET_COMMAND_REG,
+ PHASE_SR_TO_TCR(NCR5380_read(STATUS_REG) & PHASE_MASK));
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_RST);
+ udelay(50);
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
+ (void)NCR5380_read(RESET_PARITY_INTERRUPT_REG);
+ local_irq_restore(flags);
+}
+
/*
* Function : do_abort (Scsi_Host *host)
*
next prev parent reply other threads:[~2016-01-03 5:05 UTC|newest]
Thread overview: 94+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-03 5:05 [PATCH v4 00/78] More fixes, cleanup and modernization for NCR5380 drivers Finn Thain
2016-01-03 5:05 ` [PATCH v4 01/78] atari_scsi: Fix SCSI host ID setting Finn Thain
2016-01-03 5:05 ` [PATCH v4 02/78] ncr5380: Remove redundant static variable initializers Finn Thain
2016-01-03 5:05 ` [PATCH v4 03/78] ncr5380: Eliminate PDEBUG*, TDEBUG* and DTCDEBUG* macros Finn Thain
2016-01-03 5:05 ` [PATCH v4 04/78] ncr5380: Remove more pointless macros Finn Thain
2016-01-03 5:05 ` [PATCH v4 05/78] ncr5380: Remove NCR5380_local_declare and NCR5380_setup macros Finn Thain
2016-01-03 5:05 ` [PATCH v4 06/78] ncr5380: Remove NCR5380_instance_name macro Finn Thain
2016-01-03 5:05 ` [PATCH v4 07/78] ncr5380: Split NCR5380_init() into two functions Finn Thain
2016-01-03 5:05 ` [PATCH v4 08/78] ncr5380: Move NCR53C400-specific code Finn Thain
2016-01-03 5:05 ` Finn Thain [this message]
2016-01-03 5:05 ` [PATCH v4 10/78] atari_NCR5380: Remove RESET_BOOT, CONFIG_ATARI_SCSI_TOSHIBA_DELAY and CONFIG_ATARI_SCSI_RESET_BOOT Finn Thain
2016-01-03 5:05 ` [PATCH v4 11/78] ncr5380: Simplify bus reset handlers Finn Thain
2016-01-03 5:05 ` [PATCH v4 12/78] ncr5380: Remove unused hostdata->aborted flag Finn Thain
2016-01-03 5:05 ` [PATCH v4 13/78] ncr5380: Remove redundant register writes Finn Thain
2016-01-03 5:05 ` [PATCH v4 14/78] ncr5380: Use return instead of goto in NCR5380_select() Finn Thain
2016-01-03 5:05 ` [PATCH v4 15/78] ncr5380: Always escalate bad target time-out " Finn Thain
2016-01-03 5:05 ` [PATCH v4 16/78] ncr5380: Proceed with next command after NCR5380_select() calls scsi_done Finn Thain
2016-01-03 5:05 ` [PATCH v4 17/78] ncr5380: Keep BSY asserted when entering SELECTION phase Finn Thain
2016-01-03 5:05 ` [PATCH v4 18/78] ncr5380: Eliminate USLEEP_WAITLONG delay Finn Thain
2016-01-03 5:05 ` [PATCH v4 19/78] ncr5380: Cleanup bogus {request, release}_region() calls Finn Thain
2016-01-03 5:05 ` [PATCH v4 20/78] ncr5380: Introduce unbound workqueue Finn Thain
2016-01-03 5:05 ` [PATCH v4 21/78] ncr5380: Sleep when polling, if possible Finn Thain
2016-01-03 5:05 ` [PATCH v4 22/78] ncr5380: Eliminate selecting state Finn Thain
2016-01-03 5:05 ` [PATCH v4 23/78] ncr5380: Always retry arbitration and selection Finn Thain
2016-01-03 5:05 ` [PATCH v4 24/78] ncr5380: Implement NCR5380_dma_xfer_len and remove LIMIT_TRANSFERSIZE macro Finn Thain
2016-01-03 5:05 ` [PATCH v4 25/78] ncr5380: Rework disconnect versus poll logic Finn Thain
2016-01-03 5:05 ` [PATCH v4 26/78] ncr5380: Fix NCR5380_transfer_pio() result Finn Thain
2016-01-03 5:05 ` [PATCH v4 27/78] ncr5380: Add missing lock in eh_abort_handler Finn Thain
2016-01-03 5:05 ` [PATCH v4 28/78] ncr5380: Drop DEF_SCSI_QCMD macro Finn Thain
2016-01-03 5:05 ` [PATCH v4 29/78] ncr5380: Remove references to linked commands Finn Thain
2016-01-03 5:05 ` [PATCH v4 30/78] ncr5380: Add missing break after case MESSAGE_REJECT Finn Thain
2016-01-03 5:05 ` [PATCH v4 31/78] ncr5380: Fix !REQ timeout in do_abort() Finn Thain
2016-01-03 5:05 ` [PATCH v4 32/78] ncr5380: Fix bus phase " Finn Thain
2016-01-03 5:05 ` [PATCH v4 33/78] atari_NCR5380: Set do_abort() timeouts Finn Thain
2016-01-03 5:05 ` [PATCH v4 34/78] atari_NCR5380: Use arbitration timeout Finn Thain
2016-01-24 10:38 ` Geert Uytterhoeven
2016-01-25 2:45 ` Finn Thain
2016-01-25 8:05 ` Geert Uytterhoeven
2016-01-25 18:28 ` Andreas Schwab
2016-01-25 19:56 ` Michael Schmitz
2016-01-26 0:18 ` Finn Thain
2016-01-26 11:13 ` Geert Uytterhoeven
2016-01-03 5:05 ` [PATCH v4 35/78] ncr5380: Dont wait for BUS FREE after disconnect Finn Thain
2016-01-03 5:05 ` [PATCH v4 36/78] ncr5380: Use work_struct instead of delayed_work Finn Thain
2016-01-03 5:05 ` [PATCH v4 37/78] ncr5380: Standardize work queueing algorithm Finn Thain
2016-01-03 5:05 ` [PATCH v4 38/78] ncr5380: Remove UNSAFE macro Finn Thain
2016-01-03 5:05 ` [PATCH v4 39/78] ncr5380: Standardize interrupt handling Finn Thain
2016-01-03 5:05 ` [PATCH v4 40/78] ncr5380: Introduce NCR5380_poll_politely2 Finn Thain
2016-01-03 5:05 ` [PATCH v4 41/78] ncr5380: Replace redundant flags with FLAG_NO_DMA_FIXUP Finn Thain
2016-01-03 5:05 ` [PATCH v4 42/78] ncr5380: Replace READ_OVERRUNS macro with FLAG_NO_DMA_FIXUPS Finn Thain
2016-01-03 5:05 ` [PATCH v4 43/78] ncr5380: Standardize reselection handling Finn Thain
2016-01-03 5:05 ` [PATCH v4 44/78] ncr5380: Fix off-by-one bug in extended_msg[] bounds check Finn Thain
2016-01-03 5:05 ` [PATCH v4 45/78] ncr5380: Cleanup #include directives Finn Thain
2016-01-03 5:05 ` [PATCH v4 46/78] ncr5380: Fix NDEBUG_NO_DATAOUT flag Finn Thain
2016-01-03 5:05 ` [PATCH v4 47/78] ncr5380: Fix and cleanup scsi_host_template initializers Finn Thain
2016-01-03 5:05 ` [PATCH v4 48/78] atari_NCR5380: Fix queue_size limit Finn Thain
2016-01-03 5:05 ` [PATCH v4 49/78] ncr5380: Remove redundant ICR_ARBITRATION_LOST test and eliminate FLAG_DTC3181E Finn Thain
2016-01-03 5:05 ` [PATCH v4 50/78] ncr5380: Change instance->host_lock to hostdata->lock Finn Thain
2016-01-03 5:05 ` [PATCH v4 51/78] ncr5380: Remove command list debug code Finn Thain
2016-01-03 5:05 ` [PATCH v4 52/78] ncr5380: Remove H_NO macro and introduce dsprintk Finn Thain
2016-01-03 5:05 ` [PATCH v4 53/78] ncr5380: Use shost_priv helper Finn Thain
2016-01-03 5:05 ` [PATCH v4 54/78] ncr5380: Use dsprintk() for queue debugging Finn Thain
2016-01-03 5:05 ` [PATCH v4 55/78] ncr5380: Remove LIST and REMOVE macros Finn Thain
2016-01-03 5:05 ` [PATCH v4 56/78] ncr5380: Remove redundant volatile qualifiers Finn Thain
2016-01-03 5:05 ` [PATCH v4 57/78] ncr5380: Use standard list data structure Finn Thain
2016-01-03 5:05 ` [PATCH v4 58/78] ncr5380: Refactor command completion Finn Thain
2016-01-03 5:06 ` [PATCH v4 59/78] ncr5380: Fix autosense bugs Finn Thain
2016-01-03 5:06 ` [PATCH v4 60/78] ncr5380: Implement new eh_abort_handler Finn Thain
2016-01-03 5:06 ` [PATCH v4 61/78] ncr5380: Fix EH during arbitration and selection Finn Thain
2016-01-03 5:06 ` [PATCH v4 62/78] ncr5380: Implement new eh_bus_reset_handler Finn Thain
2016-01-03 5:06 ` [PATCH v4 63/78] atari_NCR5380: Remove HOSTNO macro from printk() and seq_printf() calls Finn Thain
2016-01-03 5:06 ` [PATCH v4 64/78] atari_NCR5380: Eliminate HOSTNO macro Finn Thain
2016-01-03 5:06 ` [PATCH v4 65/78] atari_scsi, sun3_scsi: Remove global Scsi_Host pointer Finn Thain
2016-01-03 5:06 ` [PATCH v4 66/78] ncr5380: Fix soft lockups Finn Thain
2016-01-03 5:06 ` [PATCH v4 67/78] ncr5380: Cleanup comments Finn Thain
2016-01-03 5:06 ` [PATCH v4 68/78] ncr5380: Fix trailing whitespace using regexp Finn Thain
2016-01-03 5:06 ` [PATCH v4 69/78] ncr5380: Fix whitespace in comments " Finn Thain
2016-01-03 7:54 ` Joe Perches
2016-01-03 8:17 ` Finn Thain
2016-01-03 14:10 ` One Thousand Gnomes
2016-01-03 18:20 ` Joe Perches
2016-01-03 21:29 ` One Thousand Gnomes
2016-01-03 21:46 ` Joe Perches
[not found] ` <20160103220505.7734a879@lxorguk.ukuu.org.uk>
2016-01-03 22:13 ` Joe Perches
2016-01-03 5:06 ` [PATCH v4 70/78] ncr5380: Merge changes from atari_NCR5380.c Finn Thain
2016-01-03 5:06 ` [PATCH v4 71/78] atari_NCR5380: Merge changes from NCR5380.c Finn Thain
2016-01-03 5:06 ` [PATCH v4 72/78] ncr5380: Cleanup whitespace and parentheses Finn Thain
2016-01-03 5:06 ` [PATCH v4 73/78] ncr5380: Fix pseudo DMA transfers on 53C400 Finn Thain
2016-01-03 5:06 ` [PATCH v4 74/78] ncr5380: Use runtime register mapping Finn Thain
2016-01-03 5:06 ` [PATCH v4 75/78] ncr5380: Enable PDMA for NCR53C400A Finn Thain
2016-01-03 5:06 ` [PATCH v4 76/78] ncr5380: Enable PDMA for DTC chips Finn Thain
2016-01-03 5:06 ` [PATCH v4 77/78] ncr5380: Fix wait for 53C80 registers registers after PDMA Finn Thain
2016-01-03 5:06 ` [PATCH v4 78/78] ncr5380: Add support for HP C2502 Finn Thain
2016-01-07 2:53 ` [PATCH v4 00/78] More fixes, cleanup and modernization for NCR5380 drivers Martin K. Petersen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160103050503.431805510@telegraphics.com.au \
--to=fthain@telegraphics.com.au \
--cc=JBottomley@odin.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-m68k@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=schmitzmic@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox