[PATCH v8 0/3] Add kernel seccomp support for m68k

[PATCH v8 0/3] Add kernel seccomp support for m68k

[Michael Schmitz]

Respin of m68k kernel seccomp support, again. 

I have split the (MMU) m68k switch to syscall_trace_enter()/
syscall_trace_leave() patch from the patch adding return code
checks for syscall_trace_enter() as suggested by Al Viro. 

Patch 1 could now replace Eric's patch 'Stop open coding
ptrace_report_syscall'.
 
Rest of the series remains unchanged.

Cheers,

	Michael

[PATCH v8 1/3] m68k/kernel - wire up syscall_trace_enter/leave for m68k

[Michael Schmitz]

m68k (other than Coldfire) uses syscall_trace for both trace entry
and trace exit. Seccomp support requires separate entry points for
trace entry and exit which are already provided for Coldfire.

Replace syscall_trace by syscall_trace_enter and syscall_trace_leave
in preparation for seccomp support.

No regression seen in testing with strace on ARAnyM.

Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>

--
Changes from v7:

Al Viro:
- split first patch to separate the switch to
  syscall_trace_enter/leave() from return code checks

Changes from v6:

Geert Uytterhoeven:
- add syscall_trace_enter() return code check for 68000
  and coldfire

Changes from v5:

- add comment to explain optimization

Changes from v4:

Andreas Schwab:
- optimize return code test (addql #1,%d0 for cmpil #-1,%d0)
- spelling fix in commit message

Changes from v3:

- change syscall_trace_enter return code test from !=0 to ==-1

revert syscall trace return code checks
---
 arch/m68k/kernel/entry.S  |  4 ++--
 arch/m68k/kernel/ptrace.c | 17 -----------------
 2 files changed, 2 insertions(+), 19 deletions(-)

diff --git a/arch/m68k/kernel/entry.S b/arch/m68k/kernel/entry.S
index 9434fca68de5..18f278bdbd21 100644
--- a/arch/m68k/kernel/entry.S
+++ b/arch/m68k/kernel/entry.S
@@ -181,7 +181,7 @@ do_trace_entry:
 	movel	#-ENOSYS,%sp@(PT_OFF_D0)| needed for strace
 	subql	#4,%sp
 	SAVE_SWITCH_STACK
-	jbsr	syscall_trace
+	jbsr	syscall_trace_enter
 	RESTORE_SWITCH_STACK
 	addql	#4,%sp
 	movel	%sp@(PT_OFF_ORIG_D0),%d0
@@ -194,7 +194,7 @@ badsys:
 do_trace_exit:
 	subql	#4,%sp
 	SAVE_SWITCH_STACK
-	jbsr	syscall_trace
+	jbsr	syscall_trace_leave
 	RESTORE_SWITCH_STACK
 	addql	#4,%sp
 	jra	.Lret_from_exception
diff --git a/arch/m68k/kernel/ptrace.c b/arch/m68k/kernel/ptrace.c
index 94b3b274186d..74d58a82a135 100644
--- a/arch/m68k/kernel/ptrace.c
+++ b/arch/m68k/kernel/ptrace.c
@@ -271,22 +271,6 @@ long arch_ptrace(struct task_struct *child, long request,
 	return -EIO;
 }
 
-asmlinkage void syscall_trace(void)
-{
-	ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
-				 ? 0x80 : 0));
-	/*
-	 * this isn't the same as continuing with a signal, but it will do
-	 * for normal use.  strace only continues with a signal if the
-	 * stopping signal is not SIGTRAP.  -brl
-	 */
-	if (current->exit_code) {
-		send_sig(current->exit_code, current, 1);
-		current->exit_code = 0;
-	}
-}
-
-#if defined(CONFIG_COLDFIRE) || !defined(CONFIG_MMU)
 asmlinkage int syscall_trace_enter(void)
 {
 	int ret = 0;
@@ -301,4 +285,3 @@ asmlinkage void syscall_trace_leave(void)
 	if (test_thread_flag(TIF_SYSCALL_TRACE))
 		tracehook_report_syscall_exit(task_pt_regs(current), 0);
 }
-#endif /* CONFIG_COLDFIRE */
-- 
2.17.1

[PATCH v8 2/3] m68k/kernel - check syscall_trace_enter() return code on m68k

[Michael Schmitz]

Check return code of syscall_trace_enter(), and skip syscall
if -1. Return code will be left at what had been set by
ptrace or seccomp (in regs->d0).

No regression seen in testing with strace on ARAnyM.

Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>

--
Changes from v7:

Al Viro:
- split return code checks from switch to syscall_trace_enter()

Changes from v6:

Geert Uytterhoeven:
- add syscall_trace_enter() return code check for 68000
  and coldfire

Changes from v5:

- add comment to explain optimization

Changes from v4:

Andreas Schwab:
- optimize return code test (addql #1,%d0 for cmpil #-1,%d0)
- spelling fix in commit message

Changes from v3:

- change syscall_trace_enter return code test from !=0 to ==-1
---
 arch/m68k/68000/entry.S    | 2 ++
 arch/m68k/coldfire/entry.S | 2 ++
 arch/m68k/kernel/entry.S   | 2 ++
 3 files changed, 6 insertions(+)

diff --git a/arch/m68k/68000/entry.S b/arch/m68k/68000/entry.S
index 997b54933015..7d63e2f1555a 100644
--- a/arch/m68k/68000/entry.S
+++ b/arch/m68k/68000/entry.S
@@ -45,6 +45,8 @@ do_trace:
 	jbsr	syscall_trace_enter
 	RESTORE_SWITCH_STACK
 	addql	#4,%sp
+	addql	#1,%d0
+	jeq	ret_from_exception
 	movel	%sp@(PT_OFF_ORIG_D0),%d1
 	movel	#-ENOSYS,%d0
 	cmpl	#NR_syscalls,%d1
diff --git a/arch/m68k/coldfire/entry.S b/arch/m68k/coldfire/entry.S
index 9f337c70243a..35104c5417ff 100644
--- a/arch/m68k/coldfire/entry.S
+++ b/arch/m68k/coldfire/entry.S
@@ -90,6 +90,8 @@ ENTRY(system_call)
 	jbsr	syscall_trace_enter
 	RESTORE_SWITCH_STACK
 	addql	#4,%sp
+	addql	#1,%d0
+	jeq	ret_from_exception
 	movel	%d3,%a0
 	jbsr	%a0@
 	movel	%d0,%sp@(PT_OFF_D0)		/* save the return value */
diff --git a/arch/m68k/kernel/entry.S b/arch/m68k/kernel/entry.S
index 18f278bdbd21..0d5b7085d76f 100644
--- a/arch/m68k/kernel/entry.S
+++ b/arch/m68k/kernel/entry.S
@@ -184,6 +184,8 @@ do_trace_entry:
 	jbsr	syscall_trace_enter
 	RESTORE_SWITCH_STACK
 	addql	#4,%sp
+	addql	#1,%d0			| optimization for cmpil #-1,%d0
+	jeq	ret_from_syscall
 	movel	%sp@(PT_OFF_ORIG_D0),%d0
 	cmpl	#NR_syscalls,%d0
 	jcs	syscall
-- 
2.17.1

[PATCH v8 3/3] m68k: add kernel seccomp support

[Michael Schmitz]

Add secure_computing() call to syscall_trace_enter to actually
filter system calls.

Add necessary arch Kconfig options, define TIF_SECCOMP trace
flag and provide basic seccomp filter support in asm/syscall.h

syscall_get_nr currently uses the syscall nr stored in orig_d0
because we change d0 to a default return code before starting a
syscall trace. This may be inconsistent with syscall_rollback
copying orig_d0 to d0 (which we never check upon return from
trace). We use d0 for the return code from syscall_trace_enter
in entry.S currently, and could perhaps expand that to store
a new syscall number returned by the seccomp filter before
executing the syscall. This clearly needs some discussion.

Compiles (for Atari) and boots on ARAnyM, otherwise untested.

Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>

--
Changes from v6:

Geert Uytterhoeven:
- add syscall_get_error(), syscall_get_return_value(), and
  syscall_set_arguments() (not needed to compile!)

Changes from v5:

Geert Uytterhoeven:
- correct wrong offset for d1-d5 register copy
- update Documentation/features/seccomp/seccomp-filter/arch-support.txt

add syscall_get_error(), syscall_get_return_value(), syscall_set_arguments()
---
 .../seccomp/seccomp-filter/arch-support.txt   |  2 +-
 arch/m68k/Kconfig                             |  2 +
 arch/m68k/include/asm/seccomp.h               | 11 ++++
 arch/m68k/include/asm/syscall.h               | 56 +++++++++++++++++++
 arch/m68k/include/asm/thread_info.h           |  2 +
 arch/m68k/kernel/ptrace.c                     |  5 ++
 6 files changed, 77 insertions(+), 1 deletion(-)
 create mode 100644 arch/m68k/include/asm/seccomp.h

diff --git a/Documentation/features/seccomp/seccomp-filter/arch-support.txt b/Documentation/features/seccomp/seccomp-filter/arch-support.txt
index 26eec58ab819..be71f2066981 100644
--- a/Documentation/features/seccomp/seccomp-filter/arch-support.txt
+++ b/Documentation/features/seccomp/seccomp-filter/arch-support.txt
@@ -14,7 +14,7 @@
     |       h8300: | TODO |
     |     hexagon: | TODO |
     |        ia64: | TODO |
-    |        m68k: | TODO |
+    |        m68k: |  ok  |
     |  microblaze: | TODO |
     |        mips: |  ok  |
     |       nds32: | TODO |
diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig
index 4cae3fbe7f97..8c4f6b3b3ddd 100644
--- a/arch/m68k/Kconfig
+++ b/arch/m68k/Kconfig
@@ -18,6 +18,8 @@ config M68K
 	select GENERIC_IOMAP
 	select GENERIC_IRQ_SHOW
 	select HAVE_AOUT if MMU
+	select HAVE_ARCH_SECCOMP
+	select HAVE_ARCH_SECCOMP_FILTER
 	select HAVE_ASM_MODVERSIONS
 	select HAVE_DEBUG_BUGVERBOSE
 	select HAVE_EFFICIENT_UNALIGNED_ACCESS if !CPU_HAS_NO_UNALIGNED
diff --git a/arch/m68k/include/asm/seccomp.h b/arch/m68k/include/asm/seccomp.h
new file mode 100644
index 000000000000..de8a94e1fb3f
--- /dev/null
+++ b/arch/m68k/include/asm/seccomp.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+#ifndef _ASM_SECCOMP_H
+#define _ASM_SECCOMP_H
+
+#include <asm-generic/seccomp.h>
+
+#define SECCOMP_ARCH_NATIVE		AUDIT_ARCH_M68K
+#define SECCOMP_ARCH_NATIVE_NR		NR_syscalls
+#define SECCOMP_ARCH_NATIVE_NAME	"m68k"
+
+#endif /* _ASM_SECCOMP_H */
diff --git a/arch/m68k/include/asm/syscall.h b/arch/m68k/include/asm/syscall.h
index 465ac039be09..2b49ad725655 100644
--- a/arch/m68k/include/asm/syscall.h
+++ b/arch/m68k/include/asm/syscall.h
@@ -4,6 +4,62 @@
 
 #include <uapi/linux/audit.h>
 
+#include <asm/unistd.h>
+
+extern const unsigned long sys_call_table[];
+
+static inline int syscall_get_nr(struct task_struct *task,
+				 struct pt_regs *regs)
+{
+	return regs->orig_d0;
+}
+
+static inline void syscall_rollback(struct task_struct *task,
+				    struct pt_regs *regs)
+{
+	regs->d0 = regs->orig_d0;
+}
+
+static inline long syscall_get_error(struct task_struct *task,
+				     struct pt_regs *regs)
+{
+	unsigned long error = regs->d0;
+	return IS_ERR_VALUE(error) ? error : 0;
+}
+
+static inline long syscall_get_return_value(struct task_struct *task,
+					    struct pt_regs *regs)
+{
+	return regs->d0;
+}
+
+static inline void syscall_set_return_value(struct task_struct *task,
+					    struct pt_regs *regs,
+					    int error, long val)
+{
+	regs->d0 = (long) error ? error : val;
+}
+
+static inline void syscall_get_arguments(struct task_struct *task,
+					 struct pt_regs *regs,
+					 unsigned long *args)
+{
+	args[0] = regs->orig_d0;
+	args++;
+
+	memcpy(args, &regs->d1, 5 * sizeof(args[0]));
+}
+
+static inline void syscall_set_arguments(struct task_struct *task,
+					 struct pt_regs *regs,
+					 unsigned long *args)
+{
+	regs->orig_d0 = args[0];
+	args++;
+
+	memcpy(&regs->d1, args, 5 * sizeof(args[0]));
+}
+
 static inline int syscall_get_arch(struct task_struct *task)
 {
 	return AUDIT_ARCH_M68K;
diff --git a/arch/m68k/include/asm/thread_info.h b/arch/m68k/include/asm/thread_info.h
index c952658ba792..31be2ad999ca 100644
--- a/arch/m68k/include/asm/thread_info.h
+++ b/arch/m68k/include/asm/thread_info.h
@@ -61,6 +61,7 @@ static inline struct thread_info *current_thread_info(void)
 #define TIF_NOTIFY_RESUME	5	/* callback before returning to user */
 #define TIF_SIGPENDING		6	/* signal pending */
 #define TIF_NEED_RESCHED	7	/* rescheduling necessary */
+#define TIF_SECCOMP		13	/* seccomp syscall filtering active */
 #define TIF_DELAYED_TRACE	14	/* single step a syscall */
 #define TIF_SYSCALL_TRACE	15	/* syscall trace active */
 #define TIF_MEMDIE		16	/* is terminating due to OOM killer */
@@ -69,6 +70,7 @@ static inline struct thread_info *current_thread_info(void)
 #define _TIF_NOTIFY_RESUME	(1 << TIF_NOTIFY_RESUME)
 #define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
 #define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
+#define _TIF_SECCOMP		(1 << TIF_SECCOMP)
 #define _TIF_DELAYED_TRACE	(1 << TIF_DELAYED_TRACE)
 #define _TIF_SYSCALL_TRACE	(1 << TIF_SYSCALL_TRACE)
 #define _TIF_MEMDIE		(1 << TIF_MEMDIE)
diff --git a/arch/m68k/kernel/ptrace.c b/arch/m68k/kernel/ptrace.c
index 74d58a82a135..bc2490c3fb52 100644
--- a/arch/m68k/kernel/ptrace.c
+++ b/arch/m68k/kernel/ptrace.c
@@ -19,6 +19,7 @@
 #include <linux/ptrace.h>
 #include <linux/user.h>
 #include <linux/signal.h>
+#include <linux/seccomp.h>
 #include <linux/tracehook.h>
 
 #include <linux/uaccess.h>
@@ -277,6 +278,10 @@ asmlinkage int syscall_trace_enter(void)
 
 	if (test_thread_flag(TIF_SYSCALL_TRACE))
 		ret = tracehook_report_syscall_entry(task_pt_regs(current));
+
+	if (secure_computing() == -1)
+		return -1;
+
 	return ret;
 }
 
-- 
2.17.1

Re: [PATCH v8 0/3] Add kernel seccomp support for m68k

[John Paul Adrian Glaubitz]

Hi!

On 1/13/22 02:09, Michael Schmitz wrote:
> Respin of m68k kernel seccomp support, again. 
> 
> I have split the (MMU) m68k switch to syscall_trace_enter()/
> syscall_trace_leave() patch from the patch adding return code
> checks for syscall_trace_enter() as suggested by Al Viro. 
> 
> Patch 1 could now replace Eric's patch 'Stop open coding
> ptrace_report_syscall'.
>  
> Rest of the series remains unchanged.

I will try to test this series within the next days. I'd like to see this
finally getting merged as there is a number of packages in Debian that
depend on libsecomp being available and there currently cannot be built
on m68k.

Adrian

-- 
 .''`.  John Paul Adrian Glaubitz
: :' :  Debian Developer - glaubitz@debian.org
`. `'   Freie Universitaet Berlin - glaubitz@physik.fu-berlin.de
  `-    GPG: 62FF 8A75 84E0 2956 9546  0006 7426 3B37 F5B5 F913

Re: [PATCH v8 0/3] Add kernel seccomp support for m68k

[Michael Schmitz]

Hi Adrian,

Am 15.01.2022 um 11:51 schrieb John Paul Adrian Glaubitz:
> Hi!
>
> On 1/13/22 02:09, Michael Schmitz wrote:
>> Respin of m68k kernel seccomp support, again.
>>
>> I have split the (MMU) m68k switch to syscall_trace_enter()/
>> syscall_trace_leave() patch from the patch adding return code
>> checks for syscall_trace_enter() as suggested by Al Viro.
>>
>> Patch 1 could now replace Eric's patch 'Stop open coding
>> ptrace_report_syscall'.
>>
>> Rest of the series remains unchanged.
>
> I will try to test this series within the next days. I'd like to see this
> finally getting merged as there is a number of packages in Debian that
> depend on libsecomp being available and there currently cannot be built
> on m68k.

Thanks - your tests might help convincing Geert (and explain why my 
selftests never showed much improvement - missing modules perhaps?).

Cheers,

	Michael


>
> Adrian
>

Re: [PATCH v8 0/3] Add kernel seccomp support for m68k

[Eric W. Biederman]

Michael Schmitz <schmitzmic@gmail.com> writes:

> Respin of m68k kernel seccomp support, again. 
>
> I have split the (MMU) m68k switch to syscall_trace_enter()/
> syscall_trace_leave() patch from the patch adding return code
> checks for syscall_trace_enter() as suggested by Al Viro. 
>
> Patch 1 could now replace Eric's patch 'Stop open coding
> ptrace_report_syscall'.

That change has merged and should show up in v5.17-rc1, but that should
not matter in practice.  This series just deletes the function I
modified and replaces it with something that is equivalent for my
purposes.

> Rest of the series remains unchanged.

Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>

Eric

Re: [PATCH v8 0/3] Add kernel seccomp support for m68k

[Michael Schmitz]

Hi Eric,

Am 18.01.2022 um 07:06 schrieb Eric W. Biederman:
> Michael Schmitz <schmitzmic@gmail.com> writes:
>
>> Respin of m68k kernel seccomp support, again.
>>
>> I have split the (MMU) m68k switch to syscall_trace_enter()/
>> syscall_trace_leave() patch from the patch adding return code
>> checks for syscall_trace_enter() as suggested by Al Viro.
>>
>> Patch 1 could now replace Eric's patch 'Stop open coding
>> ptrace_report_syscall'.
>
> That change has merged and should show up in v5.17-rc1, but that should
> not matter in practice.  This series just deletes the function I
> modified and replaces it with something that is equivalent for my
> purposes.

Thanks - I'll watch out for your patch to show up in 5.17-rc1 before 
respinning again.

>
>> Rest of the series remains unchanged.
>
> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>

Thanks,

	Michael

>
> Eric
>