From mboxrd@z Thu Jan 1 00:00:00 1970 From: Greg Ungerer Subject: Re: Porting m68k/nommu to a new board. Date: Thu, 22 Dec 2011 17:22:48 +1000 Message-ID: <4EF2DAC8.3060409@snapgear.com> References: <201112152137.29195.me@danielpalmer.co.uk> <4EEB23FD.9090904@snapgear.com> <201112181824.56271.me@danielpalmer.co.uk> Mime-Version: 1.0 Content-Type: text/plain; charset="ISO-8859-1"; format=flowed Content-Transfer-Encoding: 7bit Return-path: Received: from dalsmrelay2.nai.com ([205.227.136.216]:22719 "EHLO dalsmrelay2.nai.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752288Ab1LVH0b (ORCPT ); Thu, 22 Dec 2011 02:26:31 -0500 In-Reply-To: <201112181824.56271.me@danielpalmer.co.uk> Sender: linux-m68k-owner@vger.kernel.org List-Id: linux-m68k@vger.kernel.org To: Daniel Palmer Cc: Geert Uytterhoeven , linux-kernel@vger.kernel.org, Linux/m68k , uClinux development list Hi Daniel, On 19/12/11 12:24, Daniel Palmer wrote: > Sorry for not replying sooner. Too much work :( > >> I run on ColdFire parts all the time. Right up to 3.2-rc5 :-) >> It works great. But I don't have or regularly use any original m68k >> core hardware. I occasionally compile for the 68328 target, so it >> will compile, can't be sure if it still runs though. > > I did a bit of poking around, I couldn't get the 68328 target to build.. I was > going to have a play with it in xcopilot. It complains about some linker Yep, a couple of issues when building for the Palm/Pilot. I just sent a couple of patches to m68k-linux that fix the main problems. You will also want to disable CONFIG_FW_LOADER if you have that enabled. After that I can compile it all the way (I am building on 3.2-rc6). No idea if it works though. Regards Greg ------------------------------------------------------------------------ Greg Ungerer -- Principal Engineer EMAIL: gerg@snapgear.com SnapGear Group, McAfee PHONE: +61 7 3435 2888 8 Gardner Close FAX: +61 7 3217 5323 Milton, QLD, 4064, Australia WEB: http://www.SnapGear.com