From mboxrd@z Thu Jan 1 00:00:00 1970 From: Hannes Reinecke Subject: Re: [PATCH v3 77/77] ncr5380: Add support for HP C2502 Date: Tue, 22 Dec 2015 09:09:11 +0100 Message-ID: <56790527.4010006@suse.de> References: <20151222011737.980475848@telegraphics.com.au> <20151222011758.956108574@telegraphics.com.au> Mime-Version: 1.0 Content-Type: text/plain; charset=windows-1252; format=flowed Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: In-Reply-To: <20151222011758.956108574@telegraphics.com.au> Sender: linux-kernel-owner@vger.kernel.org To: Finn Thain , "James E.J. Bottomley" , Michael Schmitz , linux-m68k@vger.kernel.org, linux-scsi@vger.kernel.org, linux-kernel@vger.kernel.org, "Martin K. Petersen" Cc: Ondrej Zary List-Id: linux-m68k@vger.kernel.org On 12/22/2015 02:18 AM, Finn Thain wrote: > From: Ondrej Zary > > HP C2502 cards (based on 53C400A chips) use different magic numbers f= or > software-based I/O address configuration than other cards. > The configuration is also extended to allow setting the IRQ. > > Move the configuration to a new function magic_configure() and move > magic the magic numbers into an array. Add new magic numbers for thes= e > HP cards and hp_c2502 module parameter to use them, e.g.: > modprobe g_NCR5380 ncr_irq=3D7 ncr_addr=3D0x280 hp_c2502=3D1 > > Tested with HP C2502 and DTCT-436P. > > Signed-off-by: Ondrej Zary > Signed-off-by: Finn Thain > Reviewed-by: Hannes Reinecke Cheers, Hannes --=20 Dr. Hannes Reinecke zSeries & Storage hare@suse.de +49 911 74053 688 SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 N=FCrnberg GF: J. Hawn, J. Guild, F. Imend=F6rffer, HRB 16746 (AG N=FCrnberg)