From: Greg Ungerer <gregungerer@westnet.com.au>
To: Adam Buchbinder <adam.buchbinder@gmail.com>,
linux-m68k@lists.linux-m68k.org
Cc: trivial@kernel.org
Subject: Re: [PATCH] m68k: Fix misspellings in comments.
Date: Fri, 26 Feb 2016 10:38:07 +1000 [thread overview]
Message-ID: <56CF9E6F.7060309@westnet.com.au> (raw)
In-Reply-To: <1456389599-14349-1-git-send-email-adam.buchbinder@gmail.com>
Hi Adam,
On 25/02/16 18:39, Adam Buchbinder wrote:
> Signed-off-by: Adam Buchbinder <adam.buchbinder@gmail.com>
> ---
> arch/m68k/include/asm/MC68328.h | 6 +++---
> arch/m68k/include/asm/MC68EZ328.h | 6 +++---
> arch/m68k/include/asm/MC68VZ328.h | 6 +++---
> arch/m68k/include/asm/m54xxacr.h | 4 ++--
> arch/m68k/include/asm/mac_iop.h | 2 +-
> arch/m68k/include/asm/mcftimer.h | 2 +-
> arch/m68k/mac/via.c | 2 +-
> 7 files changed, 14 insertions(+), 14 deletions(-)
I have no problem with the MC68*328.h, m54xxacr.h and mcftimer.h
changes. So for those:
Acked-by: Greg Ungerer <gerg@uclinux.org>
Regards
Greg
> diff --git a/arch/m68k/include/asm/MC68328.h b/arch/m68k/include/asm/MC68328.h
> index 4ebf098..1a8080c 100644
> --- a/arch/m68k/include/asm/MC68328.h
> +++ b/arch/m68k/include/asm/MC68328.h
> @@ -798,7 +798,7 @@
>
> /**********
> *
> - * 0xFFFFF7xx -- Serial Periferial Interface Slave (SPIS)
> + * 0xFFFFF7xx -- Serial Peripheral Interface Slave (SPIS)
> *
> **********/
>
> @@ -824,7 +824,7 @@
>
> /**********
> *
> - * 0xFFFFF8xx -- Serial Periferial Interface Master (SPIM)
> + * 0xFFFFF8xx -- Serial Peripheral Interface Master (SPIM)
> *
> **********/
>
> @@ -904,7 +904,7 @@
>
> #define UBAUD_PRESCALER_MASK 0x003f /* Actual divisor is 65 - PRESCALER */
> #define UBAUD_PRESCALER_SHIFT 0
> -#define UBAUD_DIVIDE_MASK 0x0700 /* Baud Rate freq. divizor */
> +#define UBAUD_DIVIDE_MASK 0x0700 /* Baud Rate freq. divisor */
> #define UBAUD_DIVIDE_SHIFT 8
> #define UBAUD_BAUD_SRC 0x0800 /* Baud Rate Source */
> #define UBAUD_GPIOSRC 0x1000 /* GPIO source */
> diff --git a/arch/m68k/include/asm/MC68EZ328.h b/arch/m68k/include/asm/MC68EZ328.h
> index d1bde58..fedac87 100644
> --- a/arch/m68k/include/asm/MC68EZ328.h
> +++ b/arch/m68k/include/asm/MC68EZ328.h
> @@ -631,7 +631,7 @@
>
> /**********
> *
> - * 0xFFFFF8xx -- Serial Periferial Interface Master (SPIM)
> + * 0xFFFFF8xx -- Serial Peripheral Interface Master (SPIM)
> *
> **********/
>
> @@ -712,7 +712,7 @@
>
> #define UBAUD_PRESCALER_MASK 0x003f /* Actual divisor is 65 - PRESCALER */
> #define UBAUD_PRESCALER_SHIFT 0
> -#define UBAUD_DIVIDE_MASK 0x0700 /* Baud Rate freq. divizor */
> +#define UBAUD_DIVIDE_MASK 0x0700 /* Baud Rate freq. divisor */
> #define UBAUD_DIVIDE_SHIFT 8
> #define UBAUD_BAUD_SRC 0x0800 /* Baud Rate Source */
> #define UBAUD_UCLKDIR 0x2000 /* UCLK Direction */
> @@ -1160,7 +1160,7 @@ typedef volatile struct {
> #define DRAMMC_COL10 0x0080 /* Col address bit for MD10 PA11/PA0 */
> #define DRAMMC_COL9 0x0040 /* Col address bit for MD9 PA10/PA0 */
> #define DRAMMC_COL8 0x0020 /* Col address bit for MD8 PA9/PA0 */
> -#define DRAMMC_REF_MASK 0x001f /* Reresh Cycle */
> +#define DRAMMC_REF_MASK 0x001f /* Refresh Cycle */
> #define DRAMMC_REF_SHIFT 0
>
> /*
> diff --git a/arch/m68k/include/asm/MC68VZ328.h b/arch/m68k/include/asm/MC68VZ328.h
> index 6bd1bf1..34a51b2 100644
> --- a/arch/m68k/include/asm/MC68VZ328.h
> +++ b/arch/m68k/include/asm/MC68VZ328.h
> @@ -724,7 +724,7 @@
>
> /**********
> *
> - * 0xFFFFF8xx -- Serial Periferial Interface Master (SPIM)
> + * 0xFFFFF8xx -- Serial Peripheral Interface Master (SPIM)
> *
> **********/
>
> @@ -806,7 +806,7 @@
>
> #define UBAUD_PRESCALER_MASK 0x003f /* Actual divisor is 65 - PRESCALER */
> #define UBAUD_PRESCALER_SHIFT 0
> -#define UBAUD_DIVIDE_MASK 0x0700 /* Baud Rate freq. divizor */
> +#define UBAUD_DIVIDE_MASK 0x0700 /* Baud Rate freq. divisor */
> #define UBAUD_DIVIDE_SHIFT 8
> #define UBAUD_BAUD_SRC 0x0800 /* Baud Rate Source */
> #define UBAUD_UCLKDIR 0x2000 /* UCLK Direction */
> @@ -1256,7 +1256,7 @@ typedef struct {
> #define DRAMMC_COL10 0x0080 /* Col address bit for MD10 PA11/PA0 */
> #define DRAMMC_COL9 0x0040 /* Col address bit for MD9 PA10/PA0 */
> #define DRAMMC_COL8 0x0020 /* Col address bit for MD8 PA9/PA0 */
> -#define DRAMMC_REF_MASK 0x001f /* Reresh Cycle */
> +#define DRAMMC_REF_MASK 0x001f /* Refresh Cycle */
> #define DRAMMC_REF_SHIFT 0
>
> /*
> diff --git a/arch/m68k/include/asm/m54xxacr.h b/arch/m68k/include/asm/m54xxacr.h
> index 6d13cae..59e1710 100644
> --- a/arch/m68k/include/asm/m54xxacr.h
> +++ b/arch/m68k/include/asm/m54xxacr.h
> @@ -23,8 +23,8 @@
> #define CACR_IEC 0x00008000 /* Enable instruction cache */
> #define CACR_DNFB 0x00002000 /* Inhibited fill buffer */
> #define CACR_IDPI 0x00001000 /* Disable CPUSHL */
> -#define CACR_IHLCK 0x00000800 /* Intruction cache half lock */
> -#define CACR_IDCM 0x00000400 /* Intruction cache inhibit */
> +#define CACR_IHLCK 0x00000800 /* Instruction cache half lock */
> +#define CACR_IDCM 0x00000400 /* Instruction cache inhibit */
> #define CACR_ICINVA 0x00000100 /* Invalidate instr cache */
> #define CACR_EUSP 0x00000020 /* Enable separate user a7 */
>
> diff --git a/arch/m68k/include/asm/mac_iop.h b/arch/m68k/include/asm/mac_iop.h
> index fde874a..df3ea1a 100644
> --- a/arch/m68k/include/asm/mac_iop.h
> +++ b/arch/m68k/include/asm/mac_iop.h
> @@ -48,7 +48,7 @@
>
> /* IOP message status codes */
>
> -#define IOP_MSGSTATUS_UNUSED 0 /* Unusued message structure */
> +#define IOP_MSGSTATUS_UNUSED 0 /* Unused message structure */
> #define IOP_MSGSTATUS_WAITING 1 /* waiting for channel */
> #define IOP_MSGSTATUS_SENT 2 /* message sent, awaiting reply */
> #define IOP_MSGSTATUS_COMPLETE 3 /* message complete and reply rcvd */
> diff --git a/arch/m68k/include/asm/mcftimer.h b/arch/m68k/include/asm/mcftimer.h
> index 089f0f1..1150e42 100644
> --- a/arch/m68k/include/asm/mcftimer.h
> +++ b/arch/m68k/include/asm/mcftimer.h
> @@ -51,7 +51,7 @@
> * Bit definitions for the Timer Event Registers (TER).
> */
> #define MCFTIMER_TER_CAP 0x01 /* Capture event */
> -#define MCFTIMER_TER_REF 0x02 /* Refernece event */
> +#define MCFTIMER_TER_REF 0x02 /* Reference event */
>
> /****************************************************************************/
> #endif /* mcftimer_h */
> diff --git a/arch/m68k/mac/via.c b/arch/m68k/mac/via.c
> index ce56e04..920ff63 100644
> --- a/arch/m68k/mac/via.c
> +++ b/arch/m68k/mac/via.c
> @@ -68,7 +68,7 @@ static int gIER,gIFR,gBufA,gBufB;
> * interrupt. This limitation also seems to apply to VIA clone logic cores in
> * Quadra-like ASICs. (RBV and OSS machines don't have this limitation.)
> *
> - * We used to fake it by configuring the relevent VIA pin as an output
> + * We used to fake it by configuring the relevant VIA pin as an output
> * (to mask the interrupt) or input (to unmask). That scheme did not work on
> * (at least) the Quadra 700. A NuBus card's /NMRQ signal is an open-collector
> * circuit (see Designing Cards and Drivers for Macintosh II and Macintosh SE,
>
prev parent reply other threads:[~2016-02-26 0:38 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-25 8:39 [PATCH] m68k: Fix misspellings in comments Adam Buchbinder
2016-02-25 9:23 ` Finn Thain
2016-02-25 17:53 ` [PATCH v2] " Adam Buchbinder
2016-02-29 9:37 ` Geert Uytterhoeven
2016-02-26 0:38 ` Greg Ungerer [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56CF9E6F.7060309@westnet.com.au \
--to=gregungerer@westnet.com.au \
--cc=adam.buchbinder@gmail.com \
--cc=linux-m68k@lists.linux-m68k.org \
--cc=trivial@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox