From: Helge Deller <deller@gmx.de>
To: Michael Schmitz <schmitzmic@gmail.com>,
linux-m68k@vger.kernel.org, geert@linux-m68k.org
Cc: Miro Kropacek <miro.kropacek@gmail.com>, linux-fbdev@vger.kernel.org
Subject: Re: [PATCH v3 2/5] fbdev: Give atafb proper parent
Date: Thu, 20 Aug 2026 23:51:54 +0200 [thread overview]
Message-ID: <aa508c70-ccd3-4fc0-86fc-e45746e68405@gmx.de> (raw)
In-Reply-To: <20260819222838.21256-3-schmitzmic@gmail.com>
On 8/20/26 00:28, Michael Schmitz wrote:
> From: Miro Kropacek <miro.kropacek@gmail.com>
>
> The atafb fb device registers no parent, causing a missing symlink
> (/sys/class/graphics/fb0/device). Xorg fbdevhw driver looks for that
> symlink when scanning for devices, so add a parent node for atafb.
>
> The proper way to do that is use of framebuffer_alloc(), which
> requries refactoring atafb to move from static fb_info to allocation
> of fb_info by framebuffer_alloc().
> About the only location where a fb_info pointer cannot be passed
> is monspec setup in atafb_setup(). Store static monspecs there
> and copy into place after framebuffer_alloc().
>
> Pass fb_info everywhere it's needed (detect, decode_var and
> do_fb_set_var functions), and remove the static fb_info struct.
>
> Signed-off-by: Miro Kropacek <miro.kropacek@gmail.com>
> Reviewed-by: Michael Schmitz <schmitzmic@gmail.com>
> Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
> Cc: <linux-fbdev@vger.kernel.org>
> Link: https://lists.debian.org/debian-68k/2026/08/msg00000.html
>
> ---
>
> Changes in v3:
>
> - fbdev: refactor atafb fb_info use to allow use of framebuffer_alloc()
> (Thomas Zimmermann)
> ---
> drivers/video/fbdev/atafb.c | 174 +++++++++++++++++++-----------------
> 1 file changed, 92 insertions(+), 82 deletions(-)
>
> diff --git a/drivers/video/fbdev/atafb.c b/drivers/video/fbdev/atafb.c
> index b8ed1c537293..a9be06ded5c9 100644
> --- a/drivers/video/fbdev/atafb.c
> +++ b/drivers/video/fbdev/atafb.c
> @@ -158,14 +158,6 @@ static int DontCalcRes = 0;
> #define VMO_PREMASK 0x0c
> #endif
>
> -static struct fb_info fb_info = {
> - .fix = {
> - .id = "Atari ",
> - .visual = FB_VISUAL_PSEUDOCOLOR,
> - .accel = FB_ACCEL_NONE,
> - }
> -};
> -
> static void *screen_base; /* base address of screen */
> static unsigned long phys_screen_base; /* (only for Overscan) */
>
> @@ -175,6 +167,12 @@ static int current_par_valid;
>
> static int mono_moni;
>
> +/* monspecs passed by user */
> +
> +static __u32 mcap_hmin; /* hfreq lower limit (Hz) */
> +static __u32 mcap_hmax; /* hfreq upper limit (Hz) */
> +static __u16 mcap_vmin; /* vfreq lower limit (Hz) */
> +static __u16 mcap_vmax; /* vfreq upper limit (Hz) */
>
> #ifdef ATAFB_EXT
>
> @@ -299,7 +297,7 @@ static int *MV300_reg = MV300_reg_8bit;
> /* ++roman: This structure abstracts from the underlying hardware (ST(e),
> * TT, or Falcon.
> *
> - * int (*detect)(void)
> + * int (*detect)(*fb_info)
I fixed this comment up to become:
+ * int (*detect)(struct fb_info *info)
Other than that I've replaced the latest patch series by this series in
the fbdev for-next git tree.
Thanks!
Helge
next prev parent reply other threads:[~2026-08-20 21:51 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-19 22:28 [PATCH v3 0/5] m68k SuperVidel patches Michael Schmitz
2026-08-19 22:28 ` [PATCH v3 1/5] m68k: Fix atari mouse movement Michael Schmitz
2026-08-19 22:28 ` [PATCH v3 2/5] fbdev: Give atafb proper parent Michael Schmitz
2026-08-20 21:51 ` Helge Deller [this message]
2026-08-21 6:44 ` Michael Schmitz
2026-08-19 22:28 ` [PATCH v3 3/5] fbdev: Add support for further video bit depths on atafb:external Michael Schmitz
2026-08-19 22:28 ` [PATCH v3 4/5] fbdev: Add support for SuperVidel's SuperBlitter Michael Schmitz
2026-08-19 22:28 ` [PATCH v3 5/5] m68k: Add support for Svethlana Michael Schmitz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aa508c70-ccd3-4fc0-86fc-e45746e68405@gmx.de \
--to=deller@gmx.de \
--cc=geert@linux-m68k.org \
--cc=linux-fbdev@vger.kernel.org \
--cc=linux-m68k@vger.kernel.org \
--cc=miro.kropacek@gmail.com \
--cc=schmitzmic@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox