From: Heiner Kallweit <hkallweit1@gmail.com>
To: "Greg Ungerer" <gerg@linux-m68k.org>,
"Geert Uytterhoeven" <geert@linux-m68k.org>,
"Hauke Mehrtens" <hauke@hauke-m.de>,
"Rafał Miłecki" <zajec5@gmail.com>,
"Thomas Bogendoerfer" <tsbogend@alpha.franken.de>,
"Michael Chan" <michael.chan@broadcom.com>,
"Wei Fang" <wei.fang@nxp.com>,
"Shenwei Wang" <shenwei.wang@nxp.com>,
"Clark Wang" <xiaoning.wang@nxp.com>,
"Russell King - ARM Linux" <linux@armlinux.org.uk>,
"Andrew Lunn" <andrew@lunn.ch>,
"Andrew Lunn" <andrew+netdev@lunn.ch>,
"Jakub Kicinski" <kuba@kernel.org>,
"Paolo Abeni" <pabeni@redhat.com>,
"David Miller" <davem@davemloft.net>,
"Eric Dumazet" <edumazet@google.com>
Cc: linux-m68k@lists.linux-m68k.org, linux-mips@vger.kernel.org,
imx@lists.linux.dev,
"netdev@vger.kernel.org" <netdev@vger.kernel.org>
Subject: [PATCH net-next 2/6] net: fec: register a fixed phy using fixed_phy_register_100fd if needed
Date: Thu, 30 Oct 2025 22:42:30 +0100 [thread overview]
Message-ID: <adf4dc5c-5fa3-4ae6-a75c-a73954dede73@gmail.com> (raw)
In-Reply-To: <0285fcb0-0fb5-4f6f-823c-7b6e85e28ba3@gmail.com>
In case of coldfire/5272 a fixed phy is used, which so far is created
by platform code, using fixed_phy_add(). This function has a number of
problems, therefore create a potentially needed fixed phy here, using
fixed_phy_register_100fd.
Note 1: This includes a small functional change, as coldfire/5272
created a fixed phy in half-duplex mode. Likely this was by mistake,
because the fec MAC is 100FD-capable, and connection is to a switch.
Note 2: Usage of phy_find_next() makes use of the fact that dev_id can
only be 0 or 1.
Due to lack of hardware, this is compile-tested only.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
---
drivers/net/ethernet/freescale/Kconfig | 1 +
drivers/net/ethernet/freescale/fec_main.c | 52 +++++++++++------------
2 files changed, 27 insertions(+), 26 deletions(-)
diff --git a/drivers/net/ethernet/freescale/Kconfig b/drivers/net/ethernet/freescale/Kconfig
index bbef47c34..e2a591cf9 100644
--- a/drivers/net/ethernet/freescale/Kconfig
+++ b/drivers/net/ethernet/freescale/Kconfig
@@ -28,6 +28,7 @@ config FEC
depends on PTP_1588_CLOCK_OPTIONAL
select CRC32
select PHYLIB
+ select FIXED_PHY if M5272
select PAGE_POOL
imply PAGE_POOL_STATS
imply NET_SELFTESTS
diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index c60ed8bac..0b71e4c15 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -52,6 +52,7 @@
#include <linux/of_net.h>
#include <linux/phy.h>
#include <linux/pinctrl/consumer.h>
+#include <linux/phy_fixed.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/prefetch.h>
@@ -2476,11 +2477,8 @@ static int fec_enet_parse_rgmii_delay(struct fec_enet_private *fep,
static int fec_enet_mii_probe(struct net_device *ndev)
{
struct fec_enet_private *fep = netdev_priv(ndev);
- struct phy_device *phy_dev = NULL;
- char mdio_bus_id[MII_BUS_ID_SIZE];
- char phy_name[MII_BUS_ID_SIZE + 3];
- int phy_id;
- int dev_id = fep->dev_id;
+ struct phy_device *phy_dev;
+ int ret;
if (fep->phy_node) {
phy_dev = of_phy_connect(ndev, fep->phy_node,
@@ -2492,30 +2490,28 @@ static int fec_enet_mii_probe(struct net_device *ndev)
}
} else {
/* check for attached phy */
- for (phy_id = 0; (phy_id < PHY_MAX_ADDR); phy_id++) {
- if (!mdiobus_is_registered_device(fep->mii_bus, phy_id))
- continue;
- if (dev_id--)
- continue;
- strscpy(mdio_bus_id, fep->mii_bus->id, MII_BUS_ID_SIZE);
- break;
- }
+ phy_dev = phy_find_first(fep->mii_bus);
+ if (fep->dev_id && phy_dev)
+ phy_dev = phy_find_next(fep->mii_bus, phy_dev);
- if (phy_id >= PHY_MAX_ADDR) {
+ if (!phy_dev) {
netdev_info(ndev, "no PHY, assuming direct connection to switch\n");
- strscpy(mdio_bus_id, "fixed-0", MII_BUS_ID_SIZE);
- phy_id = 0;
+ phy_dev = fixed_phy_register_100fd();
+ if (IS_ERR(phy_dev)) {
+ netdev_err(ndev, "could not register fixed PHY\n");
+ return PTR_ERR(phy_dev);
+ }
}
- snprintf(phy_name, sizeof(phy_name),
- PHY_ID_FMT, mdio_bus_id, phy_id);
- phy_dev = phy_connect(ndev, phy_name, &fec_enet_adjust_link,
- fep->phy_interface);
- }
+ ret = phy_connect_direct(ndev, phy_dev, &fec_enet_adjust_link,
+ fep->phy_interface);
+ if (ret) {
+ if (phy_is_pseudo_fixed_link(phy_dev))
+ fixed_phy_unregister(phy_dev);
+ netdev_err(ndev, "could not attach to PHY\n");
+ return ret;
+ }
- if (IS_ERR(phy_dev)) {
- netdev_err(ndev, "could not attach to PHY\n");
- return PTR_ERR(phy_dev);
}
/* mask with MAC supported features */
@@ -3622,8 +3618,9 @@ static int
fec_enet_close(struct net_device *ndev)
{
struct fec_enet_private *fep = netdev_priv(ndev);
+ struct phy_device *phy_dev = ndev->phydev;
- phy_stop(ndev->phydev);
+ phy_stop(phy_dev);
if (netif_device_present(ndev)) {
napi_disable(&fep->napi);
@@ -3631,7 +3628,10 @@ fec_enet_close(struct net_device *ndev)
fec_stop(ndev);
}
- phy_disconnect(ndev->phydev);
+ phy_disconnect(phy_dev);
+
+ if (!fep->phy_node && phy_is_pseudo_fixed_link(phy_dev))
+ fixed_phy_unregister(phy_dev);
if (fep->quirks & FEC_QUIRK_ERR006687)
imx6q_cpuidle_fec_irqs_unused();
--
2.51.1
next prev parent reply other threads:[~2025-10-30 21:42 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-30 21:39 [PATCH net-next 0/6] net: phy: remove fixed_phy_add and first its users Heiner Kallweit
2025-10-30 21:41 ` [PATCH net-next 1/6] net: phy: fixed_phy: add helper fixed_phy_register_100fd Heiner Kallweit
2025-10-30 21:42 ` Heiner Kallweit [this message]
2025-10-31 3:36 ` [PATCH net-next 2/6] net: fec: register a fixed phy using fixed_phy_register_100fd if needed Wei Fang
2025-10-31 8:01 ` Heiner Kallweit
2025-11-03 3:11 ` Greg Ungerer
2025-11-03 3:15 ` Greg Ungerer
2025-11-03 7:36 ` Heiner Kallweit
2025-10-30 21:43 ` [PATCH net-next 3/6] m68k: coldfire: remove creating a fixed phy Heiner Kallweit
2025-10-30 21:44 ` [PATCH net-next 4/6] net: b44: register a fixed phy using fixed_phy_register_100fd if needed Heiner Kallweit
2025-10-30 21:45 ` [PATCH net-next 5/6] MIPS: BCM47XX: remove creating a fixed phy Heiner Kallweit
2025-10-30 21:46 ` [PATCH net-next 6/6] net: phy: fixed_phy: remove fixed_phy_add Heiner Kallweit
2025-11-05 2:50 ` [PATCH net-next 0/6] net: phy: remove fixed_phy_add and first its users patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=adf4dc5c-5fa3-4ae6-a75c-a73954dede73@gmail.com \
--to=hkallweit1@gmail.com \
--cc=andrew+netdev@lunn.ch \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=geert@linux-m68k.org \
--cc=gerg@linux-m68k.org \
--cc=hauke@hauke-m.de \
--cc=imx@lists.linux.dev \
--cc=kuba@kernel.org \
--cc=linux-m68k@lists.linux-m68k.org \
--cc=linux-mips@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=michael.chan@broadcom.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=shenwei.wang@nxp.com \
--cc=tsbogend@alpha.franken.de \
--cc=wei.fang@nxp.com \
--cc=xiaoning.wang@nxp.com \
--cc=zajec5@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).