Re: [PATCH RFC 2/2] net/8390: apne.c - add 100 Mbit support to apne.c driver

[Michael Schmitz <schmitzmic@gmail.com>]

Hi Geert,

Alex has been testing the patch for me, but had to resort to hardcoding 
the kernel option (or isa_type).

How would this option be specified on the kernel command line?

I would have thought apne:apne_100_mbit=1 would set that variable to 1?

There's been other issues with the patch as well, this appears to need a 
bit more work.

Cheers,

     Michael

On 8/06/21 12:56 am, Geert Uytterhoeven wrote:
> Hi Michael,
>
> On Sun, Jun 6, 2021 at 7:54 AM Michael Schmitz <schmitzmic@gmail.com> wrote:
>> Add Kconfig option, module parameter and PCMCIA reset code
>> required to support 100 Mbit PCMCIA ethernet cards on Amiga.
>>
>> 10 Mbit and 100 Mbit mode are supported by the same module.
>> A module parameter switches Amiga ISA IO accessors to word
>> access by changing isa_type at runtime. Additional code to
>> reset the PCMCIA hardware is also added to the driver probe.
>>
>> Patch modified after patch "[PATCH RFC net-next] Amiga PCMCIA
>> 100 MBit card support" submitted to netdev 2018/09/16 by Alex
>> Kazik <alex@kazik.de>.
>>
>> Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
>> --- a/drivers/net/ethernet/8390/apne.c
>> +++ b/drivers/net/ethernet/8390/apne.c
>> @@ -120,6 +120,10 @@ static u32 apne_msg_enable;
>>   module_param_named(msg_enable, apne_msg_enable, uint, 0444);
>>   MODULE_PARM_DESC(msg_enable, "Debug message level (see linux/netdevice.h for bitmap)");
>>
>> +static u32 apne_100_mbit;
>> +module_param_named(apne_100_mbit, uint, 0);
> error: macro "module_param_named" requires 4 arguments, but only 3 given
>
> Gr{oetje,eeting}s,
>
>                          Geert
>