From: Andreas Schwab <schwab@linux-m68k.org>
To: Greg Ungerer <gerg@snapgear.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>,
linux-m68k@vger.kernel.org, uclinux-dev@uclinux.org,
Greg Ungerer <gerg@uclinux.org>
Subject: Re: [PATCH 32/35] m68k: add ColdFire FPU support for the V4e ColdFire CPU's
Date: Wed, 28 Dec 2011 13:47:54 +0100 [thread overview]
Message-ID: <m21uroeubp.fsf@igel.home> (raw)
In-Reply-To: <4EFB0C43.20605@snapgear.com> (Greg Ungerer's message of "Wed, 28 Dec 2011 22:32:03 +1000")
Greg Ungerer <gerg@snapgear.com> writes:
> But even still, compiling with -m68040 causes gcc to generate
> different code than compiling without it (so effectively with m68020).
> In cases I looked at the instructions used where still fine to run
> on either, so nothing specific to the 68040 was generated. But if
> anything ever was then again the ".chip 68k" would cause an error
> out. I guess there isn't much extra in the 68040... move16, anything
> else? I guess gcc will never generate that in practice, so it is
> not a problem.
The only 040 specific insn that gcc would generate are the fpu insns,
but the kernel does not use any floating point.
Andreas.
--
Andreas Schwab, schwab@linux-m68k.org
GPG Key fingerprint = 58CA 54C7 6D53 942B 1756 01D3 44D5 214B 8276 4ED5
"And now for something completely different."
next prev parent reply other threads:[~2011-12-28 12:47 UTC|newest]
Thread overview: 65+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-12-23 3:15 [PATCH 00/35 v4] m68k: ColdFire MMU support gerg
2011-12-23 3:15 ` [PATCH 01/35] m68k: add machine and CPU definitions for ColdFire cores gerg
2011-12-23 3:15 ` [PATCH 02/35] m68k: show ColdFire CPU/FPU/MMU type gerg
2011-12-23 3:15 ` [PATCH 03/35] m68k: definitions for the ColdFire V4e MMU hardware gerg
2011-12-23 3:15 ` [PATCH 04/35] m68k: make interrupt definitions conditional on correct CPU types gerg
2011-12-23 3:15 ` [PATCH 05/35] m68k: add TASK definitions for ColdFires running with MMU gerg
2011-12-23 3:15 ` [PATCH 06/35] m68k: modify user space access functions to support ColdFire CPUs gerg
2011-12-25 19:56 ` Geert Uytterhoeven
2011-12-23 3:15 ` [PATCH 07/35] m68k: use addr_limit checking for m68k CPUs that do no support address spaces gerg
2011-12-25 20:01 ` Geert Uytterhoeven
2011-12-27 12:30 ` Greg Ungerer
2011-12-23 3:15 ` [PATCH 08/35] m68k: init the MMU hardware for the 54xx ColdFire gerg
2011-12-23 3:15 ` [PATCH 09/35] m68k: add ColdFire 54xx CPU MMU memory init code gerg
2011-12-25 20:05 ` Geert Uytterhoeven
2011-12-23 3:15 ` [PATCH 10/35] m68k: set register a2 to current if MMU enabled on ColdFire gerg
2011-12-25 20:09 ` Geert Uytterhoeven
2011-12-23 3:15 ` [PATCH 11/35] m68k: page table support definitions and code for ColdFire MMU gerg
2011-12-23 3:15 ` [PATCH 12/35] m68k: add page table size definitions for ColdFire V4e MMU gerg
2011-12-23 3:15 ` [PATCH 13/35] m68k: add ColdFire paging exception handling code gerg
2011-12-23 3:15 ` [PATCH 14/35] m68k: add cache support for V4e ColdFire cores running with MMU enabled gerg
2011-12-23 3:15 ` [PATCH 15/35] m68k: modify ColdFire 54xx cache support for " gerg
2011-12-23 3:15 ` [PATCH 16/35] m68k: add TLB flush support for the ColdFire V4e MMU hardware gerg
2011-12-23 3:15 ` [PATCH 17/35] m68k: define PAGE_OFFSET_RAW for ColdFire CPU with MMU enabled gerg
2011-12-25 20:15 ` Geert Uytterhoeven
2011-12-27 12:08 ` Greg Ungerer
2011-12-23 3:15 ` [PATCH 18/35] m68k: set ColdFire MMU page size gerg
2011-12-23 3:15 ` [PATCH 19/35] m68k: MMU enabled ColdFire needs 8k ELF alignment gerg
2011-12-23 3:15 ` [PATCH 20/35] m68k: ColdFire V4e MMU context support code gerg
2011-12-23 3:15 ` [PATCH 21/35] m68k: use tracehook_report_syscall_entry/exit for ColdFire MMU ptrace path gerg
2011-12-23 3:15 ` [PATCH 22/35] m68k: modify cache push and clear code for ColdFire with MMU enable gerg
2011-12-23 3:15 ` [PATCH 23/35] m68k: use ColdFire MMU read/write bit flags when ioremapping gerg
2011-12-25 20:23 ` Geert Uytterhoeven
2011-12-23 3:15 ` [PATCH 24/35] m68k: ColdFire V4e MMU paging init code and miss handler gerg
2011-12-23 3:15 ` [PATCH 25/35] m68k: compile appropriate mm arch files for ColdFire MMU support gerg
2011-12-23 3:15 ` [PATCH 26/35] m68k: create ColdFire MMU pgalloc code gerg
2011-12-23 3:15 ` [PATCH 27/35] m68k: use non-MMU entry.S code when compiling for ColdFire CPU gerg
2011-12-23 3:15 ` [PATCH 28/35] m68k: add code to setup a ColdFire 54xx platform when MMU enabled gerg
2011-12-23 3:15 ` [PATCH 29/35] m68k: ColdFire with MMU enabled uses same clocking code as non-MMU gerg
2011-12-25 20:24 ` Geert Uytterhoeven
2011-12-23 3:15 ` [PATCH 30/35] m68k: use non-MMU linker script for ColdFire MMU builds gerg
2011-12-23 3:15 ` [PATCH 31/35] m68k: adjustments to stack frame for ColdFire with MMU enabled gerg
2011-12-23 3:15 ` [PATCH 32/35] m68k: add ColdFire FPU support for the V4e ColdFire CPU's gerg
2011-12-24 19:38 ` Geert Uytterhoeven
2011-12-27 12:36 ` Greg Ungerer
2011-12-28 5:53 ` Greg Ungerer
2011-12-28 10:06 ` Geert Uytterhoeven
2011-12-28 12:32 ` Greg Ungerer
2011-12-28 12:47 ` Andreas Schwab [this message]
2011-12-28 11:17 ` Joshua Juran
2011-12-28 12:57 ` Greg Ungerer
2011-12-23 3:15 ` [PATCH 33/35] m68k: do not use m68k startup or interrupt code for " gerg
2011-12-25 20:33 ` Geert Uytterhoeven
2011-12-27 12:24 ` Greg Ungerer
2011-12-27 18:30 ` Geert Uytterhoeven
2011-12-28 0:22 ` Greg Ungerer
2011-12-28 10:09 ` Geert Uytterhoeven
2011-12-29 2:01 ` Greg Ungerer
2011-12-23 3:15 ` [PATCH 34/35] m68k: add ColdFire with MMU enabled support to the m68k mem init code gerg
2011-12-23 3:15 ` [PATCH 35/35] m68k: allow ColdFire 547x and 548x CPUs to be built with MMU enabled gerg
2011-12-26 19:32 ` Geert Uytterhoeven
2011-12-26 19:33 ` Geert Uytterhoeven
2011-12-28 1:35 ` Greg Ungerer
2011-12-29 4:52 ` Greg Ungerer
-- strict thread matches above, loose matches on Subject: below --
2011-12-16 12:35 [PATCH 00/35 v3] m68k: ColdFire MMU support gerg
2011-12-16 12:36 ` [PATCH 32/35] m68k: add ColdFire FPU support for the V4e ColdFire CPU's gerg
2011-11-25 3:40 [PATCH 00/35 v2] m68k: ColdFire MMU support gerg
2011-11-25 3:41 ` [PATCH 32/35] m68k: add ColdFire FPU support for the V4e ColdFire CPU's gerg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=m21uroeubp.fsf@igel.home \
--to=schwab@linux-m68k.org \
--cc=geert@linux-m68k.org \
--cc=gerg@snapgear.com \
--cc=gerg@uclinux.org \
--cc=linux-m68k@vger.kernel.org \
--cc=uclinux-dev@uclinux.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox