[PATCH 2/2] queue.3: Fix & update after forking circleq.3, list.3, slist.3, stailq.3 & tailq.3

[Alejandro Colomar <colomar.6.4.3@gmail.com>]

- ffix: Use man markup
- Remove specific notes about code size increase
  and execution time increase,
  as they were (at least) inaccurate.
  Instead, a generic note has been added.
- Structure the text into subsections.
- Remove sections that were empty after the forks.
- Clearly relate macro names (SLIST, TAILQ, ...)
  to a human readable name of which data structure
  they implement.

Reported-by: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: Alejandro Colomar <colomar.6.4.3@gmail.com>
---
 man3/queue.3 | 189 ++++++++++++++++++++-------------------------------
 1 file changed, 75 insertions(+), 114 deletions(-)

diff --git a/man3/queue.3 b/man3/queue.3
index 3931f8c96..c1b8a72a8 100644
--- a/man3/queue.3
+++ b/man3/queue.3
@@ -28,160 +28,121 @@
 .\" SUCH DAMAGE.
 .\" %%%LICENSE_END
 .\"
-.\"	@(#)queue.3	8.2 (Berkeley) 1/24/94
-.\" $FreeBSD$
 .\"
-.Dd February 7, 2015
-.Dt QUEUE 3
-.Os
-.Sh NAME
-.Nd implementations of singly-linked lists, singly-linked tail queues,
-lists, tail queues, and circular queues
-.Sh SYNOPSIS
-.Sh DESCRIPTION
-These macros define and operate on five types of data structures:
-singly-linked lists, singly-linked tail queues, lists, tail queues, and
-circular queues.
-All five structures support the following functionality:
-.Pp
-.Bl -enum -compact -offset indent
-.It
+.TH QUEUE 3 2015-02-7 "GNU" "Linux Programmer's Manual"
+.SH NAME
+queue \- implementations of linked lists and queues
+.SH DESCRIPTION
+The
+.I <sys/queue.h>
+header file provides a set of macros that
+define and operate on the following data structures:
+.IP * 3
+singly-linked lists (SLIST)
+.IP *
+doubly-linked lists (LIST)
+.IP *
+singly-linked tail queues (STAILQ)
+.IP *
+doubly-linked tail queues (TAILQ)
+.IP *
+doubly-linked circular queues (CIRCLEQ)
+.PP
+All structures support the following functionality:
+.IP * 3
 Insertion of a new entry at the head of the list.
-.It
+.IP *
 Insertion of a new entry after any element in the list.
-.It
+.IP *
 O(1) removal of an entry from the head of the list.
-.It
+.IP *
 Forward traversal through the list.
-.\" .It
+.\".IP *
 .\" Swapping the contents of two lists.
-.El
-.Pp
-Singly-linked lists are the simplest of the four data structures
+.PP
+Code size and execution time
+depend on the complexity of the data structure being used,
+so programmers should take care of choosing the appropriate one.
+.SS Singly-linked lists (SLIST)
+Singly-linked lists are the simplest
 and support only the above functionality.
-Singly-linked lists are ideal for applications with large datasets
-and few or no removals,
+Singly-linked lists are ideal for applications with
+large datasets and few or no removals,
 or for implementing a LIFO queue.
 Singly-linked lists add the following functionality:
-.Pp
-.Bl -enum -compact -offset indent
-.It
+.IP * 3
 O(n) removal of any entry in the list.
-.El
-.Pp
+.SS Singly-linked tail queues (STAILQ)
 Singly-linked tail queues add the following functionality:
-.Pp
-.Bl -enum -compact -offset indent
-.It
+.IP * 3
 Entries can be added at the end of a list.
-.It
+.IP *
 O(n) removal of any entry in the list.
-.It
+.IP *
 They may be concatenated.
-.El
-.Pp
+.PP
 However:
-.Pp
-.Bl -enum -compact -offset indent
-.It
+.IP * 3
 All list insertions must specify the head of the list.
-.It
+.IP *
 Each head entry requires two pointers rather than one.
-.It
-Code size is about 15% greater and operations run about 20% slower
-than singly-linked lists.
-.El
-.Pp
-Singly-linked tail queues are ideal for applications with large datasets and
-few or no removals,
+.PP
+Singly-linked tail queues are ideal for applications with
+large datasets and few or no removals,
 or for implementing a FIFO queue.
-.Pp
+.SS Doubly-linked data structures
 All doubly linked types of data structures (lists and tail queues)
 additionally allow:
-.Pp
-.Bl -enum -compact -offset indent
-.It
+.IP * 3
 Insertion of a new entry before any element in the list.
-.It
+.IP *
 O(1) removal of any entry in the list.
-.El
-.Pp
+.PP
 However:
-.Pp
-.Bl -enum -compact -offset indent
-.It
+.IP * 3
 Each element requires two pointers rather than one.
-.It
-Code size and execution time of operations (except for removal) is about
-twice that of the singly-linked data-structures.
-.El
-.Pp
+.SS Doubly-linked lists (LIST)
 Linked lists are the simplest of the doubly linked data structures.
 They add the following functionality over the above:
-.Pp
-.Bl -enum -compact -offset indent
-.It
+.IP * 3
 They may be traversed backwards.
-.El
-.Pp
+.PP
 However:
-.Pp
-.Bl -enum -compact -offset indent
-.It
+.IP * 3
 To traverse backwards, an entry to begin the traversal and the list in
 which it is contained must be specified.
-.El
-.Pp
+.SS Doubly-linked tail queues (TAILQ)
 Tail queues add the following functionality:
-.Pp
-.Bl -enum -compact -offset indent
-.It
+.IP * 3
 Entries can be added at the end of a list.
-.It
+.IP *
 They may be traversed backwards, from tail to head.
-.It
+.IP *
 They may be concatenated.
-.El
-.Pp
+.PP
 However:
-.Pp
-.Bl -enum -compact -offset indent
-.It
+.IP * 3
 All list insertions and removals must specify the head of the list.
-.It
+.IP *
 Each head entry requires two pointers rather than one.
-.It
-Code size is about 15% greater and operations run about 20% slower
-than singly-linked lists.
-.El
-.Pp
+.SS Doubly-linked circular queues (CIRCLEQ)
 Circular queues add the following functionality over the above:
-.Pp
-.Bl -enum -compact -offset indent
-.It
+.IP * 3
 The first and last entries are connected.
-.El
-.Pp
+.PP
 However:
-.Pp
-.Bl -enum -compact -offset indent
-.It
+.IP * 3
 The termination condition for traversal is more complex.
-.It
-Code size is about 40% greater and operations run about 45% slower than lists.
-.El
-.Sh EXAMPLES
-.Sh CONFORMING TO
+.SH CONFORMING TO
 Not in POSIX.1, POSIX.1-2001 or POSIX.1-2008.
 Present on the BSDs.
-.Nm queue
-functions first appeared in
-.Bx 4.4 .
-.Sh SEE ALSO
-.Xr circleq 3
-.Xr insque 3
-.Xr list 3
-.Xr slist 3
-.Xr stailq 3
-.Xr tailq 3
-.\" .Xr tree 3
+.I <sys/queue.h>
+macros first appeared in 4.4BSD.
+.SH SEE ALSO
+.BR circleq (3),
+.BR insque (3),
+.BR list (3),
+.BR slist (3),
+.BR stailq (3),
+.BR tailq (3)
+.\" .BR tree (3)
-- 
2.28.0