[PATCH v9 1/3] smartpqi: update host attribute descriptions

[Don Brace <don.brace@microchip.com>]

Minor description changes for host attributes.

Change the word "drives" to "volumes" to match our
documentation and how they are presented to SCSI Mid-layer:
as "LOGICAL VOLUMES".

I.E.
[0:1:0:0]    disk    HP       LOGICAL VOLUME   7.02  /dev/sdc

Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
---
 man4/smartpqi.4 | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/man4/smartpqi.4 b/man4/smartpqi.4
index 8227f455e052..ea8bd5e2d612 100644
--- a/man4/smartpqi.4
+++ b/man4/smartpqi.4
@@ -138,12 +138,12 @@ The host
 attribute is a write-only attribute.
 Writing to this attribute will cause the driver to scan for new,
 changed, or removed devices (e.g., hot-plugged tape drives, or newly
-configured or deleted logical drives) and notify the SCSI mid-layer of
+configured or deleted logical volumes) and notify the SCSI mid-layer of
 any changes detected.
 Usually this action is triggered automatically by configuration
 changes, so the user should not normally have to write to this file.
 Doing so may be useful when hot-plugging devices such as tape drives or
-entire storage boxes containing pre-configured logical drives.
+entire storage boxes containing pre-configured logical volumes.
 .TP
 .IR /sys/class/scsi_host/host * /version
 The host
-- 
2.42.0.482.g2e8e77cbac