From: "Michael Kerrisk (man-pages)" <mtk.manpages-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: Heinrich Schuchardt <xypron.glpk-Mmb7MZpHnFY@public.gmane.org>
Cc: mtk.manpages-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
John McCutchan
<john-jueV0HHMeujJJrXXpGQQMAC/G2K4zDHf@public.gmane.org>,
Robert Love <rlove-L7G0xEPcOZbYtjvyW6yDsg@public.gmane.org>,
Eric Paris <eparis-FjpueFixGhCM4zKIHC2jIg@public.gmane.org>,
linux-man-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [PATCH 1/1 v4] inotify.7: add example
Date: Sat, 24 May 2014 23:11:39 +0200 [thread overview]
Message-ID: <53810B0B.4050901@gmail.com> (raw)
In-Reply-To: <1400961733-17356-1-git-send-email-xypron.glpk-Mmb7MZpHnFY@public.gmane.org>
On 05/24/2014 10:02 PM, Heinrich Schuchardt wrote:
> This fourth version of the patch considers comments by Michael Kerrisk
> concerning
>
> * Alignment of inotify read buffer:
> avoid warning with gcc -Wpedantic.
>
> * In the usage description of the example replace DIRECTORY by PATH.
> The example code can be used to watch both files and directories.
Thanks for the final tweaks, Heinrich. Patch applied.
Cheers,
Michael
> ***
>
> An example for the usage of the inotify API is provided.
>
> It shows the usage of inotify_init1(2),inotify_add_watch(2) as well as
> polling and reading from the inotify file descriptor.
>
> Signed-off-by: Heinrich Schuchardt <xypron.glpk-Mmb7MZpHnFY@public.gmane.org>
> ---
> man7/inotify.7 | 228 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++-
> 1 file changed, 227 insertions(+), 1 deletion(-)
>
> diff --git a/man7/inotify.7 b/man7/inotify.7
> index 8e848b2..55e5cab 100644
> --- a/man7/inotify.7
> +++ b/man7/inotify.7
> @@ -1,5 +1,6 @@
> '\" t
> .\" Copyright (C) 2006, 2014 Michael Kerrisk <mtk.manpages-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> +.\" Copyright (C) 2014 Heinrich Schuchardt <xypron.glpk-Mmb7MZpHnFY@public.gmane.org>
> .\"
> .\" %%%LICENSE_START(VERBATIM)
> .\" Permission is granted to make and distribute verbatim copies of this
> @@ -23,7 +24,7 @@
> .\" the source, must acknowledge the copyright and authors of this work.
> .\" %%%LICENSE_END
> .\"
> -.TH INOTIFY 7 2014-05-08 "Linux" "Linux Programmer's Manual"
> +.TH INOTIFY 7 2014-05-23 "Linux" "Linux Programmer's Manual"
> .SH NAME
> inotify \- monitoring filesystem events
> .SH DESCRIPTION
> @@ -752,6 +753,231 @@ if the older had not yet been read)
> instead checked if the most recent event could be coalesced with the
> .I oldest
> unread event.
> +.SH EXAMPLE
> +The following program demonstrates the usage of the inotify API.
> +It marks the directories passed as a command-line arguments
> +and waits for events of type
> +.BR IN_OPEN ,
> +.BR IN_CLOSE_NOWRITE
> +and
> +.BR IN_CLOSE_WRITE .
> +.PP
> +The following output was recorded while editing the file
> +.I /home/user/temp/foo
> +and listing directory
> +.IR /tmp .
> +Before the file and the directory were opened,
> +.B IN_OPEN
> +events occurred.
> +After the file was closed, an
> +.B IN_CLOSE_WRITE
> +event occurred.
> +After the directory was closed, an
> +.B IN_CLOSE_NOWRITE
> +event occurred.
> +Execution of the program ended when the user pressed the ENTER key.
> +.SS Example output
> +.in +4n
> +.nf
> +$ ./inotify.7.example /tmp /home/user/temp
> +Press enter key to terminate.
> +Listening for events.
> +IN_OPEN: /home/user/temp/foo [file]
> +IN_CLOSE_WRITE: /home/user/temp/foo [file]
> +IN_OPEN: /tmp/ [directory]
> +IN_CLOSE_NOWRITE: /tmp/ [directory]
> +
> +Listening for events stopped.
> +.fi
> +.in
> +.SS Program source
> +.nf
> +#include <errno.h>
> +#include <poll.h>
> +#include <stdio.h>
> +#include <stdlib.h>
> +#include <sys/inotify.h>
> +#include <unistd.h>
> +
> +/* Read all available inotify events from the file descriptor 'fd'.
> + wd is the table of watch descriptors for the directories in argv.
> + argc is the length of wd and argv.
> + argv is the list of watched directories.
> + Entry 0 of wd and argv is unused. */
> +
> +static void
> +handle_events(int fd, int *wd, int argc, char* argv[])
> +{
> + /* Some systems cannot read integer variables if they are
> + not properly aligned. On other systems incorrect alignment
> + may decrease performance.
> + Hence, the buffer used for reading from the inotify file
> + descriptor should have the same alignment as
> + struct inotify_event. */
> + char buf[4096]
> + __attribute__ ((aligned(__alignof__(struct inotify_event))));
> + const struct inotify_event *event;
> + int i;
> + ssize_t len;
> + char *ptr;
> +
> + /* Loop while events can be read from inotify file descriptor. */
> +
> + for (;;) {
> +
> + /* Read some events. */
> +
> + len = read(fd, buf, sizeof buf);
> + if (len == \-1 && errno != EAGAIN) {
> + perror("read");
> + exit(EXIT_FAILURE);
> + }
> +
> + /* If the nonblocking read() found no events to read, then
> + it returns \-1 with errno set to EAGAIN. In that case,
> + we exit the loop. */
> +
> + if (len <= 0)
> + break;
> +
> + /* Loop over all events in the buffer */
> +
> + for (ptr = buf; ptr < buf + len;
> + ptr += sizeof(struct inotify_event) + event\->len) {
> +
> + event = (const struct inotify_event *) ptr;
> +
> + /* Print event type */
> +
> + if (event\->mask & IN_OPEN)
> + printf("IN_OPEN: ");
> + if (event\->mask & IN_CLOSE_NOWRITE)
> + printf("IN_CLOSE_NOWRITE: ");
> + if (event\->mask & IN_CLOSE_WRITE)
> + printf("IN_CLOSE_WRITE: ");
> +
> + /* Print the name of the watched directory */
> +
> + for (i = 1; i < argc; ++i) {
> + if (wd[i] == event\->wd) {
> + printf("%s/", argv[i]);
> + break;
> + }
> + }
> +
> + /* Print the name of the file */
> +
> + if (event\->len)
> + printf("%s", event\->name);
> +
> + /* Print type of filesystem object */
> +
> + if (event\->mask & IN_ISDIR)
> + printf(" [directory]\\n");
> + else
> + printf(" [file]\\n");
> +
> + }
> + }
> +}
> +
> +int
> +main(int argc, char* argv[])
> +{
> + char buf;
> + int fd, i, poll_num;
> + int *wd;
> + nfds_t nfds;
> + struct pollfd fds[2];
> +
> + if (argc < 2) {
> + printf("Usage: %s PATH [PATH ...]\\n", argv[0]);
> + exit(EXIT_FAILURE);
> + }
> +
> + printf("Press ENTER key to terminate.\\n");
> +
> + /* Create the file descriptor for accessing the inotify API */
> +
> + fd = inotify_init1(IN_NONBLOCK);
> + if (fd == \-1) {
> + perror("inotify_init1");
> + exit(EXIT_FAILURE);
> + }
> +
> + /* Allocate memory for watch descriptors */
> +
> + wd = calloc(argc, sizeof(int));
> + if (wd == NULL) {
> + perror("calloc");
> + exit(EXIT_FAILURE);
> + }
> +
> + /* Mark directories for events
> + \- file was opened
> + \- file was closed */
> +
> + for (i = 1; i < argc; i++) {
> + wd[i] = inotify_add_watch(fd, argv[i],
> + IN_OPEN | IN_CLOSE);
> + if (wd[i] == \-1) {
> + fprintf(stderr, "Cannot watch '%s'\\n", argv[i]);
> + perror("inotify_add_watch");
> + exit(EXIT_FAILURE);
> + }
> + }
> +
> + /* Prepare for polling */
> +
> + nfds = 2;
> +
> + /* Console input */
> +
> + fds[0].fd = STDIN_FILENO;
> + fds[0].events = POLLIN;
> +
> + /* Inotify input */
> +
> + fds[1].fd = fd;
> + fds[1].events = POLLIN;
> +
> + /* Wait for events and/or terminal input */
> +
> + printf("Listening for events.\\n");
> + while (1) {
> + poll_num = poll(fds, nfds, \-1);
> + if (poll_num == \-1) {
> + if (errno == EINTR)
> + continue;
> + perror("poll");
> + exit(EXIT_FAILURE);
> + }
> + if (poll_num > 0) {
> +
> + if (fds[0].revents & POLLIN) {
> +
> + /* Console input is available. Empty stdin and quit */
> +
> + while (read(STDIN_FILENO, &buf, 1) > 0 && buf != '\\n')
> + continue;
> + break;
> + }
> + if (fds[1].revents & POLLIN) {
> +
> + /* Inotify events are available */
> + handle_events(fd, wd, argc, argv);
> + }
> + }
> + }
> +
> + /* Close inotify file descriptor */
> +
> + close(fd);
> + free(wd);
> + printf("Listening for events stopped.\\n");
> + exit(EXIT_SUCCESS);
> +}
> +.fi
> .SH SEE ALSO
> .BR inotifywait (1),
> .BR inotifywatch (1),
>
--
Michael Kerrisk
Linux man-pages maintainer; http://www.kernel.org/doc/man-pages/
Linux/UNIX System Programming Training: http://man7.org/training/
--
To unsubscribe from this list: send the line "unsubscribe linux-man" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
prev parent reply other threads:[~2014-05-24 21:11 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CAKgNAkiMLf4fD_thisTNOE932GhbiSmrgqZ0qRrfo5GEpVzV1Q@mail.gmail.com>
[not found] ` <CAKgNAkiMLf4fD_thisTNOE932GhbiSmrgqZ0qRrfo5GEpVzV1Q-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-05-22 18:03 ` [PATCH 1/1 v3] inotify.7: add example Heinrich Schuchardt
[not found] ` <1400781827-22210-1-git-send-email-xypron.glpk-Mmb7MZpHnFY@public.gmane.org>
2014-05-23 8:31 ` Michael Kerrisk (man-pages)
[not found] ` <537F077A.8040309-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2014-05-24 20:02 ` [PATCH 1/1 v4] " Heinrich Schuchardt
[not found] ` <1400961733-17356-1-git-send-email-xypron.glpk-Mmb7MZpHnFY@public.gmane.org>
2014-05-24 21:11 ` Michael Kerrisk (man-pages) [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53810B0B.4050901@gmail.com \
--to=mtk.manpages-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
--cc=eparis-FjpueFixGhCM4zKIHC2jIg@public.gmane.org \
--cc=john-jueV0HHMeujJJrXXpGQQMAC/G2K4zDHf@public.gmane.org \
--cc=linux-man-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=rlove-L7G0xEPcOZbYtjvyW6yDsg@public.gmane.org \
--cc=xypron.glpk-Mmb7MZpHnFY@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).