* [PATCH] unicode.7: update to reflect past developments
@ 2014-06-10 8:39 Marko Myllynen
[not found] ` <5396C458.2050000-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
0 siblings, 1 reply; 2+ messages in thread
From: Marko Myllynen @ 2014-06-10 8:39 UTC (permalink / raw)
To: linux-man; +Cc: H. Peter Anvin, Markus Kuhn
Hi,
the unicode(7) page will look more modern with few small changes, please see below.
>From a3e9003950b6226b83ec319639bd8ecb9932275b Mon Sep 17 00:00:00 2001
From: Marko Myllynen <myllynen-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
Date: Mon, 9 Jun 2014 17:03:38 +0300
Subject: [PATCH] unicode.7: update to reflect past developments
- drop old BUGS section, editors cope with UTF-8 ok these days,
and perhaps the state-of-the-art is better described elsewhere
anyway than in a man page
- drop old suggestion about avoiding combined characters
- refer to LANANA for Linux zone, add registry file reference
- drop a reference to an inactive/dead mailing list
- update some reference URLs
---
man7/unicode.7 | 43 ++++++++-----------------------------------
1 files changed, 8 insertions(+), 35 deletions(-)
diff --git a/man7/unicode.7 b/man7/unicode.7
index 3eb1054..2fd8407 100644
--- a/man7/unicode.7
+++ b/man7/unicode.7
@@ -213,14 +213,6 @@ and
tells, how many positions (0\(en2) the cursor is advanced by the
output of a character.
.PP
-Under Linux, in general only the BMP at implementation level 1 should
-be used at the moment.
-Up to two combining characters per base
-character for certain scripts (in particular Thai) are also supported
-by some UTF-8 terminal emulators and ISO 10646 fonts (level 2), but in
-general precomposed characters should be preferred where available
-(Unicode calls this
-.BR "Normalization Form C" ).
.SS Private area
In the
.BR BMP ,
@@ -232,8 +224,10 @@ range 0xe000 to 0xefff which can be used individually by any end-user
and the Linux zone in the range 0xf000 to 0xf8ff where extensions are
coordinated among all Linux users.
The registry of the characters
-assigned to the Linux zone is currently maintained by H. Peter Anvin
-<Peter.Anvin-Xh+NVF5n0LLYtjvyW6yDsg@public.gmane.org>.
+assigned to the Linux zone is maintained by LANANA and the registry
+itself is
+.I Documentation/unicode.txt
+in the Linux kernel sources.
.SS Literature
.TP 0.2i
*
@@ -244,7 +238,7 @@ for Standardization, Geneva, 2000.
This is the official specification of
.BR UCS .
-Available as a PDF file on CD-ROM from
+Available from
.UR http://www.iso.ch/
.UE .
.TP
@@ -267,7 +261,7 @@ which improved wide and multibyte character support even further.
*
Unicode Technical Reports.
.RS
-.UR http://www.unicode.org\:/unicode\:/reports/
+.UR http://www.unicode.org\:/reports/
.UE
.RE
.TP
@@ -276,39 +270,18 @@ Markus Kuhn: UTF-8 and Unicode FAQ for UNIX/Linux.
.RS
.UR http://www.cl.cam.ac.uk\:/~mgk25\:/unicode.html
.UE
-
-Provides subscription information for the
-.I linux-utf8
-mailing list, which is the best place to look for advice on using
-Unicode under Linux.
.RE
.TP
*
Bruno Haible: Unicode HOWTO.
.RS
-.UR ftp://ftp.ilog.fr\:/pub\:/Users\:/haible\:/utf8\:/Unicode-HOWTO.html
+.UR http://www.tldp.org\:/HOWTO\:/Unicode-HOWTO.html
.UE
.RE
-.SH BUGS
-When this man page was last revised, the GNU C Library support for
-.B UTF-8
-locales was mature and XFree86 support was in an advanced state, but
-work on making applications (most notably editors) suitable for use in
-.B UTF-8
-locales was still fully in progress.
-Current general
-.B UCS
-support under Linux usually provides for CJK double-width characters
-and sometimes even simple overstriking combining characters, but
-usually does not include support for scripts with right-to-left
-writing direction or ligature substitution requirements such as
-Hebrew, Arabic, or the Indic scripts.
-These scripts are currently
-supported only in certain GUI applications (HTML viewers, word processors)
-with sophisticated text rendering engines.
.\" .SH AUTHOR
.\" Markus Kuhn <mgk25-kDbDZe0LBGWFxr2TtlUqVg@public.gmane.org>
.SH SEE ALSO
+.BR locale (1),
.BR setlocale (3),
.BR charsets (7),
.BR utf-8 (7)
--
1.7.1
--
Marko Myllynen
--
To unsubscribe from this list: send the line "unsubscribe linux-man" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH] unicode.7: update to reflect past developments
[not found] ` <5396C458.2050000-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
@ 2014-06-10 14:52 ` Michael Kerrisk (man-pages)
0 siblings, 0 replies; 2+ messages in thread
From: Michael Kerrisk (man-pages) @ 2014-06-10 14:52 UTC (permalink / raw)
To: myllynen-H+wXaHxf7aLQT0dZR+AlfA, linux-man
Cc: mtk.manpages-Re5JQEeQqe8AvxtiuMwx3w, H. Peter Anvin, Markus Kuhn
On 06/10/2014 10:39 AM, Marko Myllynen wrote:
> Hi,
>
> the unicode(7) page will look more modern with few small changes, please see below.
Thanks, Marko. Applied.
Cheers,
Michael
>>From a3e9003950b6226b83ec319639bd8ecb9932275b Mon Sep 17 00:00:00 2001
> From: Marko Myllynen <myllynen-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
> Date: Mon, 9 Jun 2014 17:03:38 +0300
> Subject: [PATCH] unicode.7: update to reflect past developments
>
> - drop old BUGS section, editors cope with UTF-8 ok these days,
> and perhaps the state-of-the-art is better described elsewhere
> anyway than in a man page
> - drop old suggestion about avoiding combined characters
> - refer to LANANA for Linux zone, add registry file reference
> - drop a reference to an inactive/dead mailing list
> - update some reference URLs
> ---
> man7/unicode.7 | 43 ++++++++-----------------------------------
> 1 files changed, 8 insertions(+), 35 deletions(-)
>
> diff --git a/man7/unicode.7 b/man7/unicode.7
> index 3eb1054..2fd8407 100644
> --- a/man7/unicode.7
> +++ b/man7/unicode.7
> @@ -213,14 +213,6 @@ and
> tells, how many positions (0\(en2) the cursor is advanced by the
> output of a character.
> .PP
> -Under Linux, in general only the BMP at implementation level 1 should
> -be used at the moment.
> -Up to two combining characters per base
> -character for certain scripts (in particular Thai) are also supported
> -by some UTF-8 terminal emulators and ISO 10646 fonts (level 2), but in
> -general precomposed characters should be preferred where available
> -(Unicode calls this
> -.BR "Normalization Form C" ).
> .SS Private area
> In the
> .BR BMP ,
> @@ -232,8 +224,10 @@ range 0xe000 to 0xefff which can be used individually by any end-user
> and the Linux zone in the range 0xf000 to 0xf8ff where extensions are
> coordinated among all Linux users.
> The registry of the characters
> -assigned to the Linux zone is currently maintained by H. Peter Anvin
> -<Peter.Anvin-Xh+NVF5n0LLYtjvyW6yDsg@public.gmane.org>.
> +assigned to the Linux zone is maintained by LANANA and the registry
> +itself is
> +.I Documentation/unicode.txt
> +in the Linux kernel sources.
> .SS Literature
> .TP 0.2i
> *
> @@ -244,7 +238,7 @@ for Standardization, Geneva, 2000.
>
> This is the official specification of
> .BR UCS .
> -Available as a PDF file on CD-ROM from
> +Available from
> .UR http://www.iso.ch/
> .UE .
> .TP
> @@ -267,7 +261,7 @@ which improved wide and multibyte character support even further.
> *
> Unicode Technical Reports.
> .RS
> -.UR http://www.unicode.org\:/unicode\:/reports/
> +.UR http://www.unicode.org\:/reports/
> .UE
> .RE
> .TP
> @@ -276,39 +270,18 @@ Markus Kuhn: UTF-8 and Unicode FAQ for UNIX/Linux.
> .RS
> .UR http://www.cl.cam.ac.uk\:/~mgk25\:/unicode.html
> .UE
> -
> -Provides subscription information for the
> -.I linux-utf8
> -mailing list, which is the best place to look for advice on using
> -Unicode under Linux.
> .RE
> .TP
> *
> Bruno Haible: Unicode HOWTO.
> .RS
> -.UR ftp://ftp.ilog.fr\:/pub\:/Users\:/haible\:/utf8\:/Unicode-HOWTO.html
> +.UR http://www.tldp.org\:/HOWTO\:/Unicode-HOWTO.html
> .UE
> .RE
> -.SH BUGS
> -When this man page was last revised, the GNU C Library support for
> -.B UTF-8
> -locales was mature and XFree86 support was in an advanced state, but
> -work on making applications (most notably editors) suitable for use in
> -.B UTF-8
> -locales was still fully in progress.
> -Current general
> -.B UCS
> -support under Linux usually provides for CJK double-width characters
> -and sometimes even simple overstriking combining characters, but
> -usually does not include support for scripts with right-to-left
> -writing direction or ligature substitution requirements such as
> -Hebrew, Arabic, or the Indic scripts.
> -These scripts are currently
> -supported only in certain GUI applications (HTML viewers, word processors)
> -with sophisticated text rendering engines.
> .\" .SH AUTHOR
> .\" Markus Kuhn <mgk25-kDbDZe0LBGWFxr2TtlUqVg@public.gmane.org>
> .SH SEE ALSO
> +.BR locale (1),
> .BR setlocale (3),
> .BR charsets (7),
> .BR utf-8 (7)
>
--
Michael Kerrisk
Linux man-pages maintainer; http://www.kernel.org/doc/man-pages/
Linux/UNIX System Programming Training: http://man7.org/training/
--
To unsubscribe from this list: send the line "unsubscribe linux-man" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2014-06-10 14:52 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-06-10 8:39 [PATCH] unicode.7: update to reflect past developments Marko Myllynen
[not found] ` <5396C458.2050000-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2014-06-10 14:52 ` Michael Kerrisk (man-pages)
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).