From: "Michael Kerrisk (man-pages)" <mtk.manpages-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: Heinrich Schuchardt <xypron.glpk-Mmb7MZpHnFY@public.gmane.org>
Cc: mtk.manpages-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
Theodore Ts'o <tytso-3s7WtUTddSA@public.gmane.org>,
linux-man-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [PATCH 1/3] getrandom.2: new manpage
Date: Tue, 28 Oct 2014 20:51:18 +0100 [thread overview]
Message-ID: <544FF3B6.4050409@gmail.com> (raw)
In-Reply-To: <1412295313-8198-1-git-send-email-xypron.glpk-Mmb7MZpHnFY@public.gmane.org>
Heinrich,
On 10/03/2014 02:15 AM, Heinrich Schuchardt wrote:
> Kernel 3.17 introduces a new system call getrandom(2).
>
> The man page in this patch is based on the commit message by
> Theodore Ts'o <tytso-3s7WtUTddSA@public.gmane.org> and suggestion by
> Michael Kerrisk <mtk.manpages-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>.
Just to make sure this patch do slowly move toward release,
I've applied it in a local branch, for release pending Ted's
input.
Cheers,
Michael
> Signed-off-by: Heinrich Schuchardt <xypron.glpk-Mmb7MZpHnFY@public.gmane.org>
> ---
> man2/getrandom.2 | 242 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 242 insertions(+)
> create mode 100644 man2/getrandom.2
>
> diff --git a/man2/getrandom.2 b/man2/getrandom.2
> new file mode 100644
> index 0000000..f6a8a1b
> --- /dev/null
> +++ b/man2/getrandom.2
> @@ -0,0 +1,242 @@
> +.\" Copyright (C) 2014, Theodore Ts'o <tytso-3s7WtUTddSA@public.gmane.org>
> +.\" Copyright (C) 2014, Heinrich Schuchardt <xypron.glpk-Mmb7MZpHnFY@public.gmane.org>
> +.\"
> +.\" %%%LICENSE_START(VERBATIM)
> +.\" Permission is granted to make and distribute verbatim copies of this
> +.\" manual provided the copyright notice and this permission notice are
> +.\" preserved on all copies.
> +.\"
> +.\" Permission is granted to copy and distribute modified versions of
> +.\" this manual under the conditions for verbatim copying, provided that
> +.\" the entire resulting derived work is distributed under the terms of
> +.\" a permission notice identical to this one.
> +.\"
> +.\" Since the Linux kernel and libraries are constantly changing, this
> +.\" manual page may be incorrect or out-of-date. The author(s) assume.
> +.\" no responsibility for errors or omissions, or for damages resulting.
> +.\" from the use of the information contained herein. The author(s) may.
> +.\" not have taken the same level of care in the production of this.
> +.\" manual, which is licensed free of charge, as they might when working.
> +.\" professionally.
> +.\"
> +.\" Formatted or processed versions of this manual, if unaccompanied by
> +.\" the source, must acknowledge the copyright and authors of this work.
> +.\" %%%LICENSE_END
> +
> +.TH GETRANDOM 2 2014-10-03 "Linux" "Linux Programmer's Manual"
> +.SH NAME
> +getrandom \- obtain a series of random bytes
> +.SH SYNOPSIS
> +.B #include <linux/random.h>
> +.sp
> +.BI "int getrandom(void *"buf ", size_t " buflen ", unsigned int " flags );
> +.SH DESCRIPTION
> +The system call
> +.BR getrandom ()
> +fills the buffer pointed to by
> +.I buf
> +with up to
> +.I buflen
> +random bytes.
> +These can be used to seed user-space random number generators
> +or for other cryptographic purposes.
> +.PP
> +.BR getrandom ()
> +relies on entropy gathered from device drivers and other sources of
> +environmental noise.
> +Unnecessarily reading large quantities of data will have a negative impact
> +on other users of the
> +.I /dev/random
> +and the
> +.I /dev/urandom
> +devices.
> +Therefore
> +.BR getrandom ()
> +should not be used for Monte Carlo simulations or other
> +programs/algorithms which are doing probabilistic sampling.
> +.PP
> +The
> +.I flags
> +argument is a bit mask that can contain zero or more of the following values
> +ORed together:
> +.TP
> +.B GRND_RANDOM
> +If this bit is set, then random bytes are drawn from the
> +.I /dev/random
> +pool instead of the
> +.I /dev/urandom
> +pool.
> +The
> +.I /dev/random
> +pool is limited based on the entropy that can be obtained from environmental
> +noise.
> +If less random bytes are available than are requested in argument
> +.IR buflen ,
> +the available random bytes will be copied and the call returns.
> +If no random byte is available, the response will depend on the
> +presence of
> +.B GRND_NONBLOCK
> +in the
> +.I flags
> +argument.
> +.TP
> +.B GRND_NONBLOCK
> +If this bit is set and there is no random byte available at all,
> +.BR getrandom ()
> +will return -1 with
> +.I errno
> +set to
> +.BR EAGAIN .
> +If the
> +.B GRND_NONBLOCK
> +bit is not set and there is no random byte available at all,
> +.BR getrandom ()
> +will block.
> +.SH RETURN VALUE
> +On success,
> +.BR getrandom ()
> +returns the number of bytes that were copied to the buffer
> +.IR buf .
> +This may be less than the bytes requested by the caller via
> +.I buflen
> +if insufficient entropy was present in the
> +.IR /dev/random
> +pool, or if the system call was interrupted by a signal.
> +.PP
> +On error, -1 is returned, and
> +.I errno
> +is set appropriately.
> +.SH ERRORS
> +.TP
> +.B EINVAL
> +An invalid flag was passed to
> +.BR getrandom ().
> +.TP
> +.B EFAULT
> +The address referenced in parameter
> +.I buf
> +is outside the accessible address space.
> +.TP
> +.B EAGAIN
> +The requested entropy was not available, and
> +.BR getrandom ()
> +would have blocked if the
> +.B GRND_NONBLOCK
> +flag was not set.
> +.TP
> +.B EINTR
> +While blocked waiting for entropy, the call was interrupted by a signal
> +handler; see the description of how interrupted
> +.BR read (2)
> +calls on "slow" devices are handled with and without the
> +.B SA_RESTART
> +flag in the
> +.BR signal (7)
> +man page.
> +.SH VERSIONS
> +.BR getrandom ()
> +was introduced in version 3.17 of the Linux kernel.
> +.SH CONFORMING TO
> +This system call is Linux-specific.
> +.SH NOTES
> +.SS Interruption by a signal handler
> +The reaction of
> +.BR getrandom ()
> +in case of an interruption of a blocking call by a signal
> +when reading from
> +.I /dev/urandom
> +.RB ( GRND_RANDOM
> +is not set)
> +depends on the initialization state of the entropy buffer
> +and on the request size
> +.IR buflen .
> +If the entropy is not yet initialized or the request size is large
> +.RI ( buflen
> +> 256),
> +.B EINTR
> +will be returned.
> +If the entropy pool has been intialized and the request size is small
> +.RI ( buflen
> +<= 256),
> +.BR getrandom ()
> +will not return
> +.BR EINTR .
> +Instead, it will return all of the bytes that have been requested.
> +.PP
> +When reading from
> +.I /dev/random
> +.RB ( GRND_RANDOM
> +is set)
> +these guarantees do
> +.I not
> +apply.
> +.PP
> +Calling
> +.BR getrandom ()
> +to read
> +.I /dev/urandom
> +for small values (<= 256) of
> +.I buflen
> +is the preferred mode of usage.
> +.PP
> +The special treatment of small values of
> +.I buflen
> +was designed for compatibility with
> +OpenBSD's
> +.BR getentropy ()
> +system call.
> +.PP
> +The user of
> +.BR getrandom ()
> +.I must
> +always check the return value, in case it indicates some error,
> +or if fewer bytes than requested were returned.
> +In the case where
> +.B GRND_RANDOM
> +is not specified and
> +.I buflen
> +is less than or equal to 256,
> +a return of fewer bytes than requested should never happen,
> +but the careful user-space code should check for this anyway!
> +.SS Choice of random device
> +Unless you are doing long-term key generation (and perhaps not even
> +then), you probably shouldn't be using
> +.B GRND_RANDOM.
> +The cryptographic algorithms used for
> +.I /dev/urandom
> +are quite conservative, and so should be sufficient for all purposes.
> +The disadvantage of
> +.B GRND_RANDOM
> +is that it can block.
> +Furthermore, dealing with partially fulfilled
> +.BR getrandom ()
> +requests increases code complexity.
> +.SS Emulating OpenBSD's getentropy()
> +The
> +.BR getentropy ()
> +system call in OpenBSD can be emulated using the following
> +function:
> +
> +.in +4n
> +.nf
> +int
> +getentropy(void *buf, size_t buflen)
> +{
> + int ret;
> +
> + if (buflen > 256)
> + goto failure;
> + ret = getrandom(buf, buflen, 0);
> + if (ret < 0)
> + return ret;
> + if (ret == buflen)
> + return 0;
> +failure:
> + errno = EIO;
> + return -1;
> +}
> +.fi
> +.in
> +.SH SEE ALSO
> +.BR random (4),
> +.BR urandom (4)
>
--
Michael Kerrisk
Linux man-pages maintainer; http://www.kernel.org/doc/man-pages/
Linux/UNIX System Programming Training: http://man7.org/training/
--
To unsubscribe from this list: send the line "unsubscribe linux-man" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2014-10-28 19:51 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-13 13:15 [PATCH 1/1] getrandom(2) : new man page Heinrich Schuchardt
[not found] ` <1410614156-16175-1-git-send-email-xypron.glpk-Mmb7MZpHnFY@public.gmane.org>
2014-09-29 15:22 ` Michael Kerrisk (man-pages)
[not found] ` <5429791D.6080903-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2014-09-29 15:52 ` Theodore Ts'o
2014-09-30 0:38 ` Aw: " Heinrich Schuchardt
2014-09-30 9:22 ` Michael Kerrisk (man-pages)
[not found] ` <542A7645.8070802-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2014-10-03 0:13 ` [PATCH 0/3] getrandom.2: new manpage Heinrich Schuchardt
[not found] ` <1412295197-8100-1-git-send-email-xypron.glpk-Mmb7MZpHnFY@public.gmane.org>
2014-10-03 0:15 ` [PATCH 1/3] " Heinrich Schuchardt
[not found] ` <1412295313-8198-1-git-send-email-xypron.glpk-Mmb7MZpHnFY@public.gmane.org>
2014-10-06 18:13 ` Michael Kerrisk (man-pages)
2014-10-28 11:37 ` Michael Kerrisk (man-pages)
2014-10-28 19:51 ` Michael Kerrisk (man-pages) [this message]
2014-11-11 11:44 ` Michael Kerrisk (man-pages)
2014-11-11 16:19 ` [PATCH] getrandom.2: treatment of interrupts Heinrich Schuchardt
[not found] ` <1415722798-4894-1-git-send-email-xypron.glpk-Mmb7MZpHnFY@public.gmane.org>
2014-11-16 15:55 ` Michael Kerrisk (man-pages)
[not found] ` <CAKgNAkgVUeekKZjyTsjWgkXfv_u72T_ms7qofSJ_omqhfExfCw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-11-22 11:28 ` Heinrich Schuchardt
2015-01-10 13:23 ` [PATCH 1/3] getrandom.2: new manpage Michael Kerrisk (man-pages)
[not found] ` <CAKgNAkiQUXFZ82jDNqEPxpBmdkKOg03uQXg=iEuUNzg0rvgkZA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-01-22 18:30 ` [PATCH 1/1] getrandom.2: mention bug concerning treatment of interrupts Heinrich Schuchardt
[not found] ` <1421951410-6420-1-git-send-email-xypron.glpk-Mmb7MZpHnFY@public.gmane.org>
2015-01-22 19:58 ` Michael Kerrisk (man-pages)
2015-01-22 19:30 ` [PATCH 1/1] getrandom.2: rework paragraphs marked with FIXME Heinrich Schuchardt
[not found] ` <1421955046-8296-1-git-send-email-xypron.glpk-Mmb7MZpHnFY@public.gmane.org>
2015-01-23 6:01 ` Michael Kerrisk (man-pages)
2014-10-03 0:15 ` [PATCH 2/3] random.3: SEE ALSO getrandom.2 Heinrich Schuchardt
[not found] ` <1412295324-8241-1-git-send-email-xypron.glpk-Mmb7MZpHnFY@public.gmane.org>
2014-10-28 14:37 ` Michael Kerrisk (man-pages)
2014-10-03 0:15 ` [PATCH 3/3] random.4: " Heinrich Schuchardt
[not found] ` <1412295335-8287-1-git-send-email-xypron.glpk-Mmb7MZpHnFY@public.gmane.org>
2014-10-28 14:38 ` Michael Kerrisk (man-pages)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=544FF3B6.4050409@gmail.com \
--to=mtk.manpages-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
--cc=linux-man-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=tytso-3s7WtUTddSA@public.gmane.org \
--cc=xypron.glpk-Mmb7MZpHnFY@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).