From: Alejandro Colomar <alx@kernel.org>
To: Zhang Yi <yi.zhang@huaweicloud.com>
Cc: Pankaj Raghav <p.raghav@samsung.com>,
linux-man@vger.kernel.org, pankaj.raghav@linux.dev,
linux-xfs@vger.kernel.org, gost.dev@samsung.com,
linux-ext4@vger.kernel.org, hch@lst.de,
"Darrick J . Wong" <djwong@kernel.org>
Subject: Re: [PATCH v3] man/man2/fallocate.2: Add doc for FALLOC_FL_WRITE_ZEROES
Date: Fri, 11 Sep 2026 00:44:49 +0200 [thread overview]
Message-ID: <aqMyw2dBeyzicF0s@devuan> (raw)
In-Reply-To: <5d02e7dd-fa9e-497b-b1f6-9cc0f2a45c8f@huaweicloud.com>
[-- Attachment #1: Type: text/plain, Size: 3357 bytes --]
Hi Zhang, Pankaj,
> Date: 2026-09-10 20:26:23+0800
> From: Zhang Yi <yi.zhang@huaweicloud.com>
>
> On 9/10/2026 7:20 PM, Pankaj Raghav wrote:
> > This flag was added to the kernel in v6.17. As of now, only ext4 and
> > block device nodes support this flag.
> >
> > Cc: Zhang Yi <yi.zhang@huaweicloud.com>
> > Cc: Christoph Hellwig <hch@lst.de>
> > Cc: Darrick J. Wong <djwong@kernel.org>
> > Cc: gost.dev@samsung.com
> > Cc: linux-ext4@vger.kernel.org
> > Cc: linux-xfs@vger.kernel.org
> > Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
>
> Looks good to me.
>
> Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Thanks! I've applied the patch and the tag.
Have a lovely night!
Alex
>
> > ---
> > Changes since v2:
> > - Changed the commit format based on Alejandro's feedback.
> > - I have retained "preallocated" term based on Zhang Yi's feedback[1]
> >
> >
> > Note:
> > This feature was recently added to XFS and it is expected to land in
> > v7.3. I will update this man page again once v7.3 is released.
> >
> > [1] https://lore.kernel.org/linux-man/3f17d214-f69c-47b6-abf6-4437cc5840c0@huaweicloud.com/
> >
> > man/man2/fallocate.2 | 38 ++++++++++++++++++++++++++++++++++++++
> > 1 file changed, 38 insertions(+)
> >
> > diff --git a/man/man2/fallocate.2 b/man/man2/fallocate.2
> > index ef6586c77..48a8c3468 100644
> > --- a/man/man2/fallocate.2
> > +++ b/man/man2/fallocate.2
> > @@ -244,6 +244,43 @@ SMB3 (since Linux 3.17)
> > .IP \[bu]
> > Btrfs (since Linux 4.16)
> > .\" commit f27451f229966874a8793995b8e6b74326d125df
> > +.SS Writing zeroes in file space
> > +Specifying the
> > +.B FALLOC_FL_WRITE_ZEROES
> > +flag (available since Linux 6.17)
> > +.\" commit 7bd43cc79cab3850f34da0a31d5b042b701590ef
> > +in
> > +.I mode
> > +physically zeros space in the byte range starting at
> > +.I offset
> > +and continuing for
> > +.I size
> > +bytes.
> > +Within the specified range,
> > +blocks are preallocated for the regions that span the holes
> > +in the file.
> > +After a successful call,
> > +subsequent reads from this range will return zeros and
> > +subsequent writes to that range do not require further
> > +changes to the file mapping metadata.
> > +.P
> > +Zeroing is done within the filesystem.
> > +The filesystem may use a hardware-accelerated zeroing command
> > +or may submit regular writes.
> > +The behavior depends on the filesystem design and the
> > +available hardware.
> > +.P
> > +No other flags may be specified in
> > +.I mode
> > +in conjunction with
> > +.BR FALLOC_FL_WRITE_ZEROES .
> > +.P
> > +Not all filesystems support
> > +.BR FALLOC_FL_WRITE_ZEROES ;
> > +if a filesystem doesn't support the operation, an error is returned.
> > +The operation is supported only in ext4 (only for extent-based files)
> > +since Linux 6.17.
> > +.\" commit f4265b8d32c49ff95711e6fef7d05245a2905b30
> > .SS Increasing file space
> > Specifying the
> > .B FALLOC_FL_INSERT_RANGE
> > @@ -385,6 +422,7 @@ or
> > is
> > .BR FALLOC_FL_COLLAPSE_RANGE ,
> > .BR FALLOC_FL_ZERO_RANGE ,
> > +.BR FALLOC_FL_WRITE_ZEROES ,
> > or
> > .BR FALLOC_FL_INSERT_RANGE ,
> > but the file referred to by
> >
> > base-commit: d926b42e0ea0406d5c2556e18205eced92d053f1
>
--
<https://www.alejandro-colomar.es>
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
prev parent reply other threads:[~2026-09-10 22:44 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-10 11:20 [PATCH v3] man/man2/fallocate.2: Add doc for FALLOC_FL_WRITE_ZEROES Pankaj Raghav
2026-09-10 12:26 ` Zhang Yi
2026-09-10 22:44 ` Alejandro Colomar [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aqMyw2dBeyzicF0s@devuan \
--to=alx@kernel.org \
--cc=djwong@kernel.org \
--cc=gost.dev@samsung.com \
--cc=hch@lst.de \
--cc=linux-ext4@vger.kernel.org \
--cc=linux-man@vger.kernel.org \
--cc=linux-xfs@vger.kernel.org \
--cc=p.raghav@samsung.com \
--cc=pankaj.raghav@linux.dev \
--cc=yi.zhang@huaweicloud.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox