* DVR card SAA7134/SAA7135HL unknown @ 2013-08-15 17:15 Jody Gugelhupf 2013-08-16 8:42 ` Jody Gugelhupf 0 siblings, 1 reply; 6+ messages in thread From: Jody Gugelhupf @ 2013-08-15 17:15 UTC (permalink / raw) To: linux-media@vger.kernel.org hi all :) trying to get this 8 channel dvr card to work in linux, but I get this: Board is currently unknown. You might try to use the card=<nr> saa7134: insmod option to specify which board do you have, but this is saa7134: somewhat risky, as might damage your card. It is better to ask saa7134: for support at linux-media@vger.kernel.org. so here I am. I have not tried to set the card myself as I don't know what number to use. Was hoping I could get some help here to get it working. Some info I collected so far can be found here http://pastebin.ca/2430477 any ideas what I might try next or what card to specify? thank you in advance for any help. jody ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: DVR card SAA7134/SAA7135HL unknown 2013-08-15 17:15 DVR card SAA7134/SAA7135HL unknown Jody Gugelhupf @ 2013-08-16 8:42 ` Jody Gugelhupf 2013-08-16 12:45 ` Jody Gugelhupf 2013-08-16 22:28 ` Charlie X. Liu 0 siblings, 2 replies; 6+ messages in thread From: Jody Gugelhupf @ 2013-08-16 8:42 UTC (permalink / raw) To: linux-media@vger.kernel.org Seems like something went wrong with pastebin, here the info again, would really appreciate some help: http://pastebin.com/TUTpkc0F ----- Original Message ----- From: Jody Gugelhupf <knueffle@yahoo.com> To: "linux-media@vger.kernel.org" <linux-media@vger.kernel.org> Cc: Sent: Thursday, August 15, 2013 7:15:25 PM Subject: DVR card SAA7134/SAA7135HL unknown hi all :) trying to get this 8 channel dvr card to work in linux, but I get this: Board is currently unknown. You might try to use the card=<nr> saa7134: insmod option to specify which board do you have, but this is saa7134: somewhat risky, as might damage your card. It is better to ask saa7134: for support at linux-media@vger.kernel.org. so here I am. I have not tried to set the card myself as I don't know what number to use. Was hoping I could get some help here to get it working. Some info I collected so far can be found here http://pastebin.ca/2430477 any ideas what I might try next or what card to specify? thank you in advance for any help. jody ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: DVR card SAA7134/SAA7135HL unknown 2013-08-16 8:42 ` Jody Gugelhupf @ 2013-08-16 12:45 ` Jody Gugelhupf 2013-08-16 22:28 ` Charlie X. Liu 1 sibling, 0 replies; 6+ messages in thread From: Jody Gugelhupf @ 2013-08-16 12:45 UTC (permalink / raw) To: linux-media@vger.kernel.org ok, thanks to theBear on IRC i managed to get it working with mplayer, so in case someone in the future runs into the same problem i hope they will find my post. I connected a camera to one cable and tried all inputs and video devices: mplayer tv:// -tv driver=v4l2:device=/dev/video0:input=0 ... mplayer tv:// -tv driver=v4l2:device=/dev/video7:input=8 most resulting videos were just black, but there were also some green and some grey lines ones, then i remembered another post, namely: http://www.zoneminder.com/wiki/index.php/Videocards_with_Philips_saa7134_chipset) So this made me add to my modprobe and rebooted: alias char-major-81 videodev alias char-major-81-0 saa7134 options saa7134 card=33,33,33,33 then tried the mplayer command again and it worked!!! :) ----- Original Message ----- From: Jody Gugelhupf <knueffle@yahoo.com> To: "linux-media@vger.kernel.org" <linux-media@vger.kernel.org> Cc: Sent: Friday, August 16, 2013 10:42:08 AM Subject: Re: DVR card SAA7134/SAA7135HL unknown Seems like something went wrong with pastebin, here the info again, would really appreciate some help: http://pastebin.com/TUTpkc0F ----- Original Message ----- From: Jody Gugelhupf <knueffle@yahoo.com> To: "linux-media@vger.kernel.org" <linux-media@vger.kernel.org> Cc: Sent: Thursday, August 15, 2013 7:15:25 PM Subject: DVR card SAA7134/SAA7135HL unknown hi all :) trying to get this 8 channel dvr card to work in linux, but I get this: Board is currently unknown. You might try to use the card=<nr> saa7134: insmod option to specify which board do you have, but this is saa7134: somewhat risky, as might damage your card. It is better to ask saa7134: for support at linux-media@vger.kernel.org. so here I am. I have not tried to set the card myself as I don't know what number to use. Was hoping I could get some help here to get it working. Some info I collected so far can be found here http://pastebin.ca/2430477 any ideas what I might try next or what card to specify? thank you in advance for any help. jody ^ permalink raw reply [flat|nested] 6+ messages in thread
* RE: DVR card SAA7134/SAA7135HL unknown 2013-08-16 8:42 ` Jody Gugelhupf 2013-08-16 12:45 ` Jody Gugelhupf @ 2013-08-16 22:28 ` Charlie X. Liu 2013-08-17 19:55 ` Jody Gugelhupf 1 sibling, 1 reply; 6+ messages in thread From: Charlie X. Liu @ 2013-08-16 22:28 UTC (permalink / raw) To: 'Jody Gugelhupf', linux-media You may use "card=73,73,73,73,73,73,73,73" -----Original Message----- From: linux-media-owner@vger.kernel.org [mailto:linux-media-owner@vger.kernel.org] On Behalf Of Jody Gugelhupf Sent: Friday, August 16, 2013 1:42 AM To: linux-media@vger.kernel.org Subject: Re: DVR card SAA7134/SAA7135HL unknown Seems like something went wrong with pastebin, here the info again, would really appreciate some help: http://pastebin.com/TUTpkc0F ----- Original Message ----- From: Jody Gugelhupf <knueffle@yahoo.com> To: "linux-media@vger.kernel.org" <linux-media@vger.kernel.org> Cc: Sent: Thursday, August 15, 2013 7:15:25 PM Subject: DVR card SAA7134/SAA7135HL unknown hi all :) trying to get this 8 channel dvr card to work in linux, but I get this: Board is currently unknown. You might try to use the card=<nr> saa7134: insmod option to specify which board do you have, but this is saa7134: somewhat risky, as might damage your card. It is better to ask saa7134: for support at linux-media@vger.kernel.org. so here I am. I have not tried to set the card myself as I don't know what number to use. Was hoping I could get some help here to get it working. Some info I collected so far can be found here http://pastebin.ca/2430477 any ideas what I might try next or what card to specify? thank you in advance for any help. jody -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: DVR card SAA7134/SAA7135HL unknown 2013-08-16 22:28 ` Charlie X. Liu @ 2013-08-17 19:55 ` Jody Gugelhupf 2013-08-19 17:56 ` Charlie X. Liu 0 siblings, 1 reply; 6+ messages in thread From: Jody Gugelhupf @ 2013-08-17 19:55 UTC (permalink / raw) To: linux-media@vger.kernel.org thanks, but that does not work 33,33,33,33,33,33,33,33 97,97,97,97,97,97,97,97 both do seem to work, maybe even more, but i wonder how to determine the best/right one or does that not matter? thx in advance jody ----- Original Message ----- From: Charlie X. Liu <charlie@sensoray.com> To: 'Jody Gugelhupf' <knueffle@yahoo.com>; linux-media@vger.kernel.org Cc: Sent: Saturday, August 17, 2013 12:28:41 AM Subject: RE: DVR card SAA7134/SAA7135HL unknown You may use "card=73,73,73,73,73,73,73,73" -----Original Message----- From: linux-media-owner@vger.kernel.org [mailto:linux-media-owner@vger.kernel.org] On Behalf Of Jody Gugelhupf Sent: Friday, August 16, 2013 1:42 AM To: linux-media@vger.kernel.org Subject: Re: DVR card SAA7134/SAA7135HL unknown Seems like something went wrong with pastebin, here the info again, would really appreciate some help: http://pastebin.com/TUTpkc0F ----- Original Message ----- From: Jody Gugelhupf <knueffle@yahoo.com> To: "linux-media@vger.kernel.org" <linux-media@vger.kernel.org> Cc: Sent: Thursday, August 15, 2013 7:15:25 PM Subject: DVR card SAA7134/SAA7135HL unknown hi all :) trying to get this 8 channel dvr card to work in linux, but I get this: Board is currently unknown. You might try to use the card=<nr> saa7134: insmod option to specify which board do you have, but this is saa7134: somewhat risky, as might damage your card. It is better to ask saa7134: for support at linux-media@vger.kernel.org. so here I am. I have not tried to set the card myself as I don't know what number to use. Was hoping I could get some help here to get it working. Some info I collected so far can be found here http://pastebin.ca/2430477 any ideas what I might try next or what card to specify? thank you in advance for any help. jody -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 6+ messages in thread
* RE: DVR card SAA7134/SAA7135HL unknown 2013-08-17 19:55 ` Jody Gugelhupf @ 2013-08-19 17:56 ` Charlie X. Liu 0 siblings, 0 replies; 6+ messages in thread From: Charlie X. Liu @ 2013-08-19 17:56 UTC (permalink / raw) To: 'Jody Gugelhupf', linux-media As long as you found a card number that works, it shouldn't matter. BTW, do you have its card info, like manufacturer, Model number, picture, ..., etc.? What's your app? If you only use it for video surveillance and don't need stereo audio, you may use a low cost capture card, like Sensoray Model 812 (http://www.sensoray.com/products/812.htm) for your application. Best, Charlie X. Liu @ Sensoray Company, Inc. -----Original Message----- From: linux-media-owner@vger.kernel.org [mailto:linux-media-owner@vger.kernel.org] On Behalf Of Jody Gugelhupf Sent: Saturday, August 17, 2013 12:55 PM To: linux-media@vger.kernel.org Subject: Re: DVR card SAA7134/SAA7135HL unknown thanks, but that does not work 33,33,33,33,33,33,33,33 97,97,97,97,97,97,97,97 both do seem to work, maybe even more, but i wonder how to determine the best/right one or does that not matter? thx in advance jody ----- Original Message ----- From: Charlie X. Liu <charlie@sensoray.com> To: 'Jody Gugelhupf' <knueffle@yahoo.com>; linux-media@vger.kernel.org Cc: Sent: Saturday, August 17, 2013 12:28:41 AM Subject: RE: DVR card SAA7134/SAA7135HL unknown You may use "card=73,73,73,73,73,73,73,73" -----Original Message----- From: linux-media-owner@vger.kernel.org [mailto:linux-media-owner@vger.kernel.org] On Behalf Of Jody Gugelhupf Sent: Friday, August 16, 2013 1:42 AM To: linux-media@vger.kernel.org Subject: Re: DVR card SAA7134/SAA7135HL unknown Seems like something went wrong with pastebin, here the info again, would really appreciate some help: http://pastebin.com/TUTpkc0F ----- Original Message ----- From: Jody Gugelhupf <knueffle@yahoo.com> To: "linux-media@vger.kernel.org" <linux-media@vger.kernel.org> Cc: Sent: Thursday, August 15, 2013 7:15:25 PM Subject: DVR card SAA7134/SAA7135HL unknown hi all :) trying to get this 8 channel dvr card to work in linux, but I get this: Board is currently unknown. You might try to use the card=<nr> saa7134: insmod option to specify which board do you have, but this is saa7134: somewhat risky, as might damage your card. It is better to ask saa7134: for support at linux-media@vger.kernel.org. so here I am. I have not tried to set the card myself as I don't know what number to use. Was hoping I could get some help here to get it working. Some info I collected so far can be found here http://pastebin.ca/2430477 any ideas what I might try next or what card to specify? thank you in advance for any help. jody -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2013-08-19 18:16 UTC | newest] Thread overview: 6+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2013-08-15 17:15 DVR card SAA7134/SAA7135HL unknown Jody Gugelhupf 2013-08-16 8:42 ` Jody Gugelhupf 2013-08-16 12:45 ` Jody Gugelhupf 2013-08-16 22:28 ` Charlie X. Liu 2013-08-17 19:55 ` Jody Gugelhupf 2013-08-19 17:56 ` Charlie X. Liu
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox