From: "Tom Moore" <htmoore@comcast.net>
To: <linux-dvb@linuxtv.org>
Subject: [linux-dvb] Duel Hauppauge HVR-1600
Date: Tue, 14 Oct 2008 18:43:21 -0500 [thread overview]
Message-ID: <001501c92e56$a4903870$edb0a950$@net> (raw)
[-- Attachment #1.1: Type: text/plain, Size: 1561 bytes --]
I just bought two Hauppauge HVR-1600 cards and I'm trying to set them up in
Mythdorra 5. I have the cx18 drivers installed but it is only initializing
one
card. I'm getting the following message when I do a dmesg | grep cx18. Has
anyone ran accross this problem before with duel cards of the same model and
if
so, how do I fix it? Any help will be greatly appreciated.
Thanks,
Tom Moore
Houston, TX
dmesg | grep cx18
cx18: Start initialization, version 1.0.1
cx18-0: Initializing card #0
cx18-0: Autodetected Hauppauge card
cx18-0: Unreasonably low latency timer, setting to 64 (was 32)
cx18-0: cx23418 revision 01010000 (B)
cx18-0: Autodetected Hauppauge HVR-1600
cx18-0: VBI is not yet supported
tuner 2-0061: chip found @ 0xc2 (cx18 i2c driver #0-1)
cs5345 1-004c: chip found @ 0x98 (cx18 i2c driver #0-0)
cx18-0: Disabled encoder IDX device
cx18-0: Registered device video0 for encoder MPEG (2 MB)
DVB: registering new adapter (cx18)
cx18-0: DVB Frontend registered
cx18-0: Registered device video32 for encoder YUV (2 MB)
cx18-0: Registered device video24 for encoder PCM audio (1 MB)
cx18-0: Initialized card #0: Hauppauge HVR-1600
cx18-1: Initializing card #1
cx18-1: Autodetected Hauppauge card
cx18-1: Unreasonably low latency timer, setting to 64 (was 32)
cx18-1: ioremap failed, perhaps increasing __VMALLOC_RESERVE in page.h
cx18-1: or disabling CONFIG_HIGHMEM4G into the kernel would help
cx18-1: Error -12 on initialization
cx18: probe of 0000:02:04.0 failed with error -12
cx18: End initialization
[-- Attachment #1.2: Type: text/html, Size: 7972 bytes --]
[-- Attachment #2: Type: text/plain, Size: 150 bytes --]
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
next reply other threads:[~2008-10-14 23:44 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-10-14 23:43 Tom Moore [this message]
2008-10-15 0:15 ` [linux-dvb] Duel Hauppauge HVR-1600 Andy Walls
2008-10-15 1:54 ` Tom Moore
2008-10-15 10:51 ` Andy Walls
2008-10-15 12:54 ` Darren Salt
2008-10-16 2:26 ` Tom Moore
2008-10-16 2:49 ` Andy Walls
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='001501c92e56$a4903870$edb0a950$@net' \
--to=htmoore@comcast.net \
--cc=linux-dvb@linuxtv.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox