From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: From: "James Evans" To: "'Steven Toth'" References: <002001c91c65$939d8b60$bad8a220$@net> <48D71852.5090705@linuxtv.org> In-Reply-To: <48D71852.5090705@linuxtv.org> Date: Sun, 21 Sep 2008 21:26:46 -0700 Message-ID: <002701c91c6b$6d310fa0$47932ee0$@net> MIME-Version: 1.0 Content-Language: en-us Cc: linux-dvb@linuxtv.org Subject: Re: [linux-dvb] DVICO FusionHDTV5 Express Support List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: linux-dvb-bounces@linuxtv.org Errors-To: linux-dvb-bounces+mchehab=infradead.org@linuxtv.org List-ID: Thank you for such a quick response. > Debug looks OK. If you have another board where you know for certain > that tuning a specific 8VSB frequency works, then tuning this same > frequency with the LG should probably work reliably. The installed Airstar HD5000 cards both have an LG tuner and can tune perfectly fine. > In terms of the tuner-to-demod, are you confident that the I/F is set > correctly? (And inversion for that matter?) I am not sure I understand the above question. How would I go about setting up the interface for the tuner-to-demod? Thanks, --J. Evans _______________________________________________ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb