From: "Timothy D. Lenz" <tlenz@vorgon.com>
To: <linux-media@vger.kernel.org>
Cc: <linux-dvb@linuxtv.org>
Subject: Re: [linux-dvb] FusionHDTV7 and v4l causes kernel panic
Date: Thu, 19 Mar 2009 00:46:51 -0700 [thread overview]
Message-ID: <002701c9a866$e23da0b0$0a00a8c0@vorg> (raw)
In-Reply-To: 1237430932.3303.103.camel@palomino.walls.org
No, changing baud rate to 9600 has no effect. It is simply not sending the log to the serial port.
----- Original Message -----
From: "Andy Walls" <awalls@radix.net>
To: <linux-media@vger.kernel.org>
Cc: <linux-dvb@linuxtv.org>
Sent: Wednesday, March 18, 2009 7:48 PM
Subject: Re: [linux-dvb] FusionHDTV7 and v4l causes kernel panic
> On Wed, 2009-03-18 at 19:16 -0700, Timothy D. Lenz wrote:
> > I've added
> > console=ttyS0,115200 console=tty0
> > to the kernel command line options and with out the console=tty0 part the dump no longer shows on the monitor, so redirect seems
to
> > work but loging the serial port on a second computer gets nothing. I tested the connection with echo and that worked but the
kernel
> > dump won't go out the port. The last 2 lines of the screen are:
> >
> > EIP: [<c012a8c6>] queue_work+0x3/0x68 SS:ESP 0068:f778dd24
> > Kernel panic - not syncing: Fatal exception in interrupt
>
> Hmm. The only thing in the cx23885 driver that tries to schedule work,
> and thus the only thing that could possibly pass in a bad argument, is
> the netup_ci_slot_status() function. It gets called when an IRQ comes
> in indicating a GPIO[01] event, and the driver thinks the card is a
> NetUp Dual DVB-S2 CI card.
>
> That's consistent with the "fatal exception in interrupt", but without
> the backtrace, one can't be completely sure this call to queue work was
> initiated by the cx23885 driver and a problem with cx23885 data
> structures. (But it is the most likely scenario, IMO)
> I just can't see how netup_ci_slot_status() get's called for your card.
>
>
> > Any way to get the dump to go out the serial port?
>
> Does 9600 baud help? (Just a guess.)
>
> Regards,
> Andy
>
> > ----- Original Message -----
> > From: "Andy Walls" <awalls@radix.net>
> > To: "Timothy D. Lenz" <tlenz@vorgon.com>
> > Cc: <linux-media@vger.kernel.org>
> > Sent: Monday, March 16, 2009 6:07 PM
> > Subject: Re: [linux-dvb] FusionHDTV7 and v4l causes kernel panic
> >
> >
> > > On Mon, 2009-03-16 at 17:46 -0700, Timothy D. Lenz wrote:
> > > > When it panics, there is no log, just a bunch of stuff that that scrolls fast on the main monitor then cold lock.
> > > > No way to scroll
> > > > back.
> > >
> > > Not even Shift+PageUp ?
> > >
> > >
> > >
> > > > I looked at the logs and the ones that are text had nothing about it.
> > >
> > > Digital camera or pencil and paper will be least complex way to capture
> > > the ooops data. Please don't leave out the "Code" bytes at the bottom
> > > and do your best to make sure those are absolutely correct.
> > >
> > > Regards,
> > > Andy
> > >
> > >
> > > > ----- Original Message -----
> > > > From: "Steven Toth" <stoth@linuxtv.org>
> > > > To: <linux-media@vger.kernel.org>
> > > > Cc: <linux-dvb@linuxtv.org>
> > > > Sent: Monday, March 16, 2009 6:59 AM
> > > > Subject: Re: [linux-dvb] FusionHDTV7 and v4l causes kernel panic
> > > >
> > > >
> > > > > Timothy D. Lenz wrote:
> > > > > > Using kernel 2.6.26.8 and v4l from a few days ago. When I modprobe cx23885 to load the drivers, I get kernel panic
> > > > >
> > > > > We'll need the oops.
> > > > >
> > > > > - Steve
> > > > >
> > > > > _______________________________________________
> > > > > linux-dvb users mailing list
> > > > > For V4L/DVB development, please use instead linux-media@vger.kernel.org
> > > > > linux-dvb@linuxtv.org
> > > > > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
> > > >
> > > > --
> > > > To unsubscribe from this list: send the line "unsubscribe linux-media" in
> > > > the body of a message to majordomo@vger.kernel.org
> > > > More majordomo info at http://vger.kernel.org/majordomo-info.html
> > > >
> > >
> >
> >
> > _______________________________________________
> > linux-dvb users mailing list
> > For V4L/DVB development, please use instead linux-media@vger.kernel.org
> > linux-dvb@linuxtv.org
> > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
> >
>
>
> _______________________________________________
> linux-dvb users mailing list
> For V4L/DVB development, please use instead linux-media@vger.kernel.org
> linux-dvb@linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
next prev parent reply other threads:[~2009-03-19 7:47 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-03-16 2:22 [linux-dvb] FusionHDTV7 and v4l causes kernel panic Timothy D. Lenz
2009-03-16 13:59 ` Steven Toth
2009-03-17 0:46 ` Timothy D. Lenz
2009-03-17 1:07 ` Andy Walls
2009-03-19 2:16 ` Timothy D. Lenz
2009-03-19 2:48 ` Andy Walls
2009-03-19 7:46 ` Timothy D. Lenz [this message]
2009-03-20 2:18 ` Timothy D. Lenz
2009-03-20 18:22 ` Timothy D. Lenz
2009-03-20 21:33 ` Andy Walls
2009-03-21 1:10 ` Andy Walls
2009-03-21 9:03 ` Timothy D. Lenz
2009-03-21 15:32 ` Andy Walls
[not found] ` <000401c9aa59$730d42f0$0a00a8c0@vorg>
2009-03-21 23:08 ` Andy Walls
2009-03-18 7:51 ` Timothy D. Lenz
2009-03-18 13:27 ` Brandon Jenkins
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='002701c9a866$e23da0b0$0a00a8c0@vorg' \
--to=tlenz@vorgon.com \
--cc=linux-dvb@linuxtv.org \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox