From: <ps00de@yahoo.de>
To: <linux-media@vger.kernel.org>
Subject: em28xx WinTV dualHD in Raspbian
Date: Tue, 18 Oct 2016 23:55:04 +0200 [thread overview]
Message-ID: <003101d2298a$48b12400$da136c00$@yahoo.de> (raw)
In-Reply-To:
Hi there,
I am running an updated raspbian image with kernel 4.4.23-v7+, matching
linux-headers-4.4.23-v7+_4.4.23-v7+-2_armhf from here:
https://www.niksula.hut.fi/~mhiienka/Rpi/linux-headers-rpi/ and
dvb-demod-si2168-b40-01.fw (see linuxtv-wiki).
Before the last apt-get upgrade this works great, but now, it ends up in
recognizing the device but not create /dev/dvb.
Log:
Oct 18 23:07:59 mediapi kernel: [ 7587.975803] usb 1-1.3: new high-speed USB
device number 6 using dwc_otg
Oct 18 23:07:59 mediapi kernel: [ 7588.076796] usb 1-1.3: New USB device
found, idVendor=2040, idProduct=0265
Oct 18 23:07:59 mediapi kernel: [ 7588.076817] usb 1-1.3: New USB device
strings: Mfr=3, Product=1, SerialNumber=2
Oct 18 23:07:59 mediapi kernel: [ 7588.076842] usb 1-1.3: Product: dualHD
Oct 18 23:07:59 mediapi kernel: [ 7588.076853] usb 1-1.3: Manufacturer: HCW
Oct 18 23:07:59 mediapi kernel: [ 7588.076864] usb 1-1.3: SerialNumber:
0011540068
Oct 18 23:08:00 mediapi kernel: [ 7589.111483] media: Linux media interface:
v0.10
Oct 18 23:08:00 mediapi kernel: [ 7589.121622] Linux video capture
interface: v2.00
Oct 18 23:08:00 mediapi kernel: [ 7589.126137] em28xx: New device HCW dualHD
@ 480 Mbps (2040:0265, interface 0, class 0)
Oct 18 23:08:00 mediapi kernel: [ 7589.126157] em28xx: DVB interface 0
found: isoc
Oct 18 23:08:00 mediapi kernel: [ 7589.127012] em28xx: chip ID is em28174
Oct 18 23:08:01 mediapi kernel: [ 7590.338459] em28174 #0: EEPROM ID = 26 00
01 00, EEPROM hash = 0x7ee3cbc8
Oct 18 23:08:01 mediapi kernel: [ 7590.338482] em28174 #0: EEPROM info:
Oct 18 23:08:01 mediapi kernel: [ 7590.338496] em28174 #0: microcode
start address = 0x0004, boot configuration = 0x01
Oct 18 23:08:01 mediapi kernel: [ 7590.346046] em28174 #0: AC97 audio (5
sample rates)
Oct 18 23:08:01 mediapi kernel: [ 7590.346064] em28174 #0: 500mA max
power
Oct 18 23:08:01 mediapi kernel: [ 7590.346079] em28174 #0: Table at
offset 0x27, strings=0x0e6a, 0x1888, 0x087e
Oct 18 23:08:01 mediapi kernel: [ 7590.347683] em28174 #0: Identified as
Hauppauge WinTV-dualHD DVB (card=99)
Oct 18 23:08:01 mediapi kernel: [ 7590.355143] tveeprom 4-0050: Hauppauge
model 204109, rev B2I6, serial# 11540068
Oct 18 23:08:01 mediapi kernel: [ 7590.355170] tveeprom 4-0050: tuner model
is SiLabs Si2157 (idx 186, type 4)
Oct 18 23:08:01 mediapi kernel: [ 7590.355188] tveeprom 4-0050: TV standards
PAL(B/G) NTSC(M) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom
0xfc)
Oct 18 23:08:01 mediapi kernel: [ 7590.355204] tveeprom 4-0050: audio
processor is None (idx 0)
Oct 18 23:08:01 mediapi kernel: [ 7590.355219] tveeprom 4-0050: has no
radio, has IR receiver, has no IR transmitter
Oct 18 23:08:01 mediapi kernel: [ 7590.355233] em28174 #0: dvb set to isoc
mode.
Oct 18 23:08:01 mediapi rsyslogd-2007: action 'action 17' suspended, next
retry is Tue Oct 18 23:08:31 2016 [try http://www.rsyslog.com/e/2007 ]
Oct 18 23:08:01 mediapi kernel: [ 7590.357918] usbcore: registered new
interface driver em28xx
Oct 18 23:08:01 mediapi kernel: [ 7590.369200] em28xx_dvb: disagrees about
version of symbol dvb_dmxdev_init
Oct 18 23:08:01 mediapi kernel: [ 7590.369228] em28xx_dvb: Unknown symbol
dvb_dmxdev_init (err -22)
[…] (multiple „disagrees“ and „unknown symbol“)
ct 18 23:08:01 mediapi kernel: [ 7590.417607] em28174 #0: Registering input
extension
Oct 18 23:08:01 mediapi kernel: [ 7590.455841] Registered IR keymap
rc-hauppauge
Oct 18 23:08:01 mediapi kernel: [ 7590.456798] input: em28xx IR (em28174 #0)
as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/rc/rc0/input0
Oct 18 23:08:01 mediapi kernel: [ 7590.457059] rc rc0: em28xx IR (em28174
#0) as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/rc/rc0
Oct 18 23:08:01 mediapi kernel: [ 7590.457715] em28174 #0: Input extension
successfully initalized
Oct 18 23:08:01 mediapi kernel: [ 7590.457734] em28xx: Registered (Em28xx
Input Extension) extension
Before it stopped working, I have executed the apt upgrade, installed the
new kernel header and run
git clone git://linuxtv.org/media_build.git
cd media_build
./build
sudo make install
No errors appeared.
What I am doing wrong? The last git clone was approx. in August.
2nd question: Is there anything new in supporting both tuners of the dualHD
stick?
Thanks,
Patrick
next reply other threads:[~2016-10-18 21:55 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-18 21:55 ps00de [this message]
2016-10-19 15:35 ` em28xx WinTV dualHD in Raspbian Mauro Carvalho Chehab
2016-10-19 19:08 ` AW: " ps00de
-- strict thread matches above, loose matches on Subject: below --
2016-10-19 18:50 ps00de
2016-10-19 19:14 ` Mauro Carvalho Chehab
2016-10-22 17:36 ` AW: " ps00de
2016-10-23 10:03 ` Andrey Utkin
2016-10-23 10:14 ` Olli Salonen
2016-11-03 20:45 ` Christian Steiner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='003101d2298a$48b12400$da136c00$@yahoo.de' \
--to=ps00de@yahoo.de \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).