From: Jingoo Han <jg1.han@samsung.com>
To: linux-arm-kernel@lists.infradead.org, linux-samsung-soc@vger.kernel.org
Cc: 'Kishon Vijay Abraham I' <kishon@ti.com>,
linux-media@vger.kernel.org, 'Kukjin Kim' <kgene.kim@samsung.com>,
'Sylwester Nawrocki' <s.nawrocki@samsung.com>,
'Felipe Balbi' <balbi@ti.com>, 'Tomasz Figa' <t.figa@samsung.com>,
devicetree-discuss@lists.ozlabs.org,
'Inki Dae' <inki.dae@samsung.com>,
'Donghwa Lee' <dh09.lee@samsung.com>,
'Kyungmin Park' <kyungmin.park@samsung.com>,
'Jean-Christophe PLAGNIOL-VILLARD' <plagnioj@jcrosoft.com>,
linux-fbdev@vger.kernel.org, 'Hui Wang' <jason77.wang@gmail.com>,
Jingoo Han <jg1.han@samsung.com>
Subject: [PATCH V3 2/3] phy: Add driver for Exynos DP PHY
Date: Mon, 01 Jul 2013 14:24:02 +0900 [thread overview]
Message-ID: <005301ce761b$32adf960$9809ec20$@samsung.com> (raw)
Add a PHY provider driver for the Samsung Exynos SoC DP PHY.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Felipe Balbi <balbi@ti.com>
---
.../devicetree/bindings/phy/samsung-phy.txt | 8 ++
drivers/phy/Kconfig | 5 +
drivers/phy/Makefile | 1 +
drivers/phy/phy-exynos-dp-video.c | 118 ++++++++++++++++++++
4 files changed, 132 insertions(+)
create mode 100644 drivers/phy/phy-exynos-dp-video.c
diff --git a/Documentation/devicetree/bindings/phy/samsung-phy.txt b/Documentation/devicetree/bindings/phy/samsung-phy.txt
index 5ff208c..3fb656a 100644
--- a/Documentation/devicetree/bindings/phy/samsung-phy.txt
+++ b/Documentation/devicetree/bindings/phy/samsung-phy.txt
@@ -12,3 +12,11 @@ the PHY specifier identifies the PHY and its meaning is as follows:
1 - MIPI DSIM 0,
2 - MIPI CSIS 1,
3 - MIPI DSIM 1.
+
+Samsung EXYNOS SoC series DP PHY
+-------------------------------------------------
+
+Required properties:
+- compatible : should be "samsung,exynos5250-dp-video-phy";
+- reg : offset and length of the DP PHY register set;
+- #phy-cells : from the generic phy bindings, must be 0;
\ No newline at end of file
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 6f446d0..760f55a 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -19,4 +19,9 @@ config PHY_EXYNOS_MIPI_VIDEO
help
Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung
S5P and EXYNOS SoCs.
+
+config PHY_EXYNOS_DP_VIDEO
+ tristate "EXYNOS SoC series DP PHY driver"
+ help
+ Support for DP PHY found on Samsung EXYNOS SoCs.
endif
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index 71d8841..0fd1340 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -4,3 +4,4 @@
obj-$(CONFIG_GENERIC_PHY) += phy-core.o
obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO) += phy-exynos-mipi-video.o
+obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO) += phy-exynos-dp-video.o
diff --git a/drivers/phy/phy-exynos-dp-video.c b/drivers/phy/phy-exynos-dp-video.c
new file mode 100644
index 0000000..75e1d11
--- /dev/null
+++ b/drivers/phy/phy-exynos-dp-video.c
@@ -0,0 +1,118 @@
+/*
+ * Samsung EXYNOS SoC series DP PHY driver
+ *
+ * Copyright (C) 2013 Samsung Electronics Co., Ltd.
+ * Author: Jingoo Han <jg1.han@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+
+/* DPTX_PHY_CONTROL register */
+#define EXYNOS_DPTX_PHY_ENABLE (1 << 0)
+
+struct exynos_dp_video_phy {
+ void __iomem *regs;
+};
+
+static int __set_phy_state(struct exynos_dp_video_phy *state, unsigned int on)
+{
+ void __iomem *addr;
+ u32 reg;
+
+ addr = state->regs;
+
+ reg = readl(addr);
+ if (on)
+ reg |= EXYNOS_DPTX_PHY_ENABLE;
+ else
+ reg &= ~EXYNOS_DPTX_PHY_ENABLE;
+ writel(reg, addr);
+
+ return 0;
+}
+
+static int exynos_dp_video_phy_power_on(struct phy *phy)
+{
+ struct exynos_dp_video_phy *state = phy_get_drvdata(phy);
+
+ return __set_phy_state(state, 1);
+}
+
+static int exynos_dp_video_phy_power_off(struct phy *phy)
+{
+ struct exynos_dp_video_phy *state = phy_get_drvdata(phy);
+
+ return __set_phy_state(state, 0);
+}
+
+static struct phy_ops exynos_dp_video_phy_ops = {
+ .power_on = exynos_dp_video_phy_power_on,
+ .power_off = exynos_dp_video_phy_power_off,
+ .owner = THIS_MODULE,
+};
+
+static int exynos_dp_video_phy_probe(struct platform_device *pdev)
+{
+ struct exynos_dp_video_phy *state;
+ struct device *dev = &pdev->dev;
+ struct resource *res;
+ struct phy_provider *phy_provider;
+ struct phy *phy;
+
+ state = devm_kzalloc(dev, sizeof(*state), GFP_KERNEL);
+ if (!state)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+ state->regs = devm_ioremap_resource(dev, res);
+ if (IS_ERR(state->regs))
+ return PTR_ERR(state->regs);
+
+ dev_set_drvdata(dev, state);
+
+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+ if (IS_ERR(phy_provider))
+ return PTR_ERR(phy_provider);
+
+ phy = devm_phy_create(dev, 0, &exynos_dp_video_phy_ops, "dp");
+ if (IS_ERR(phy)) {
+ dev_err(dev, "failed to create DP PHY\n");
+ return PTR_ERR(phy);
+ }
+ phy_set_drvdata(phy, state);
+
+ return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id exynos_dp_video_phy_of_match[] = {
+ { .compatible = "samsung,exynos5250-dp-video-phy" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, exynos_dp_video_phy_of_match);
+#endif
+
+static struct platform_driver exynos_dp_video_phy_driver = {
+ .probe = exynos_dp_video_phy_probe,
+ .driver = {
+ .name = "exynos-dp-video-phy",
+ .owner = THIS_MODULE,
+ .of_match_table = exynos_dp_video_phy_of_match,
+ }
+};
+module_platform_driver(exynos_dp_video_phy_driver);
+
+MODULE_AUTHOR("Jingoo Han <jg1.han@samsung.com>");
+MODULE_DESCRIPTION("Samsung EXYNOS SoC DP PHY driver");
+MODULE_LICENSE("GPL v2");
--
1.7.10.4
next reply other threads:[~2013-07-01 5:24 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-01 5:24 Jingoo Han [this message]
2013-07-01 19:48 ` [PATCH V3 2/3] phy: Add driver for Exynos DP PHY Sylwester Nawrocki
2013-07-02 6:58 ` Jingoo Han
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='005301ce761b$32adf960$9809ec20$@samsung.com' \
--to=jg1.han@samsung.com \
--cc=balbi@ti.com \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=dh09.lee@samsung.com \
--cc=inki.dae@samsung.com \
--cc=jason77.wang@gmail.com \
--cc=kgene.kim@samsung.com \
--cc=kishon@ti.com \
--cc=kyungmin.park@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-fbdev@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=plagnioj@jcrosoft.com \
--cc=s.nawrocki@samsung.com \
--cc=t.figa@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox