From: "Thomas Goerke" <tom@goeng.com.au>
To: stev391@email.com, "'jackden'" <jackden@gmail.com>
Cc: linux-dvb@linuxtv.org
Subject: Re: [linux-dvb] Compro VideoMate E650 hybrid PCIe DVB-T and analog TV/FM capture card
Date: Fri, 5 Sep 2008 12:40:19 +0800 [thread overview]
Message-ID: <007b01c90f11$82483240$86d896c0$@com.au> (raw)
In-Reply-To: <007a01c90f0e$5fca1dd0$1f5e5970$@com.au>
>
> OK..some interesting feedback. Your patch works, but only after a cold
> reset. I initially double checked I had applied the correct patch
> i.e.
> hg clone http://linuxtv.org/hg/v4l-dvb
> cd v4l-dvb
> make
> patch -p1 < ../patch/Compro_VideoMate_E650_V0.2.patch
> make
> sudo make install
>
> and it seems that I did ;-).
>
> After a warm reboot the card does not work. See below for outputs from
> both
> dmesg. You will notice that for the second one (fail condition) the
> kernel
> ring buffer has been filled and seems to have wiped out the initial
> messages.
>
> In terms of the ic descriptions these are the chips on the board (I
> will
> update the wiki):
> CX23885-132 - AV Decoder
> CX23417-11Z - MPEG 2 Encoder
> ZL10353 0619T S - Demodulator
> ETRONTECH EM638325ts-6G - 2M x 32 bit Synchronous
> DRAM (SDRAM)
> XCEIVE XC3008ACQ AK50113.2 - Video Tuner
> ELAN EM78P156ELMH-G - 8 bit microprocessor
> HT24LC02 - 2K 2-Wire CMOS
> Serial EEPROM
> IDT QS3257 - High-Speed CMOS
> QuickSwitch Quad 2:1 Mux/Demux
> 1509 - PWM Buck DC/DC
> Converter??
>
> With regard to reading the eeprom, I don't have time at the moment to
> search
> but will look into it if someone can provide somepointers.
>
> Tom
>
--snip --
Stephen,
I have just loaded the working modules from previous patch and all worked
fine after cold reset. However, after warm reset (sudo reboot) I get
similar errors in the kernel ring buffer. The card is still working and I
can view channels etc.
Output from dmesg:
[ 106.175921] cx23885[0]/0: [f698ca80/14] cx23885_buf_queue - append to
active
[ 106.175923] cx23885[0]/0: queue is not empty - append to active
[ 106.175925] cx23885[0]/0: [f69cdf00/15] cx23885_buf_queue - append to
active
[ 106.175926] cx23885[0]/0: queue is not empty - append to active
[ 106.175928] cx23885[0]/0: [f69cda80/16] cx23885_buf_queue - append to
active
[ 106.175930] cx23885[0]/0: queue is not empty - append to active
[ 106.175932] cx23885[0]/0: [f69cdb40/17] cx23885_buf_queue - append to
active
[ 106.175933] cx23885[0]/0: queue is not empty - append to active
[ 106.175935] cx23885[0]/0: [f69cd240/18] cx23885_buf_queue - append to
active
[ 106.175937] cx23885[0]/0: queue is not empty - append to active
[ 106.175939] cx23885[0]/0: [f69cd6c0/19] cx23885_buf_queue - append to
active
[ 106.175941] cx23885[0]/0: queue is not empty - append to active
[ 106.175943] cx23885[0]/0: [f69cdc00/20] cx23885_buf_queue - append to
active
[ 106.175944] cx23885[0]/0: queue is not empty - append to active
[ 106.175946] cx23885[0]/0: [f69cf3c0/21] cx23885_buf_queue - append to
active
[ 106.175948] cx23885[0]/0: queue is not empty - append to active
[ 106.175950] cx23885[0]/0: [f69ceb40/22] cx23885_buf_queue - append to
active
[ 106.175952] cx23885[0]/0: queue is not empty - append to active
[ 106.175954] cx23885[0]/0: [f69ce6c0/23] cx23885_buf_queue - append to
active
--
[ 107.969013] cx23885[0]/0: cx23885_buf_prepare: df9e69c0
[ 107.969030] cx23885[0]/0: cx23885_buf_prepare: f5f63000
[ 107.969042] cx23885[0]/0: cx23885_buf_prepare: f5f630c0
[ 107.969054] cx23885[0]/0: cx23885_buf_prepare: f5f63180
[ 107.969064] cx23885[0]/0: cx23885_buf_prepare: f5f63240
[ 107.969078] cx23885[0]/0: cx23885_buf_prepare: f5f63300
[ 107.969092] cx23885[0]/0: cx23885_buf_prepare: f5f633c0
[ 107.969104] cx23885[0]/0: cx23885_buf_prepare: f5f63480
[ 107.969120] cx23885[0]/0: cx23885_buf_prepare: f5f63540
[ 107.969132] cx23885[0]/0: cx23885_buf_prepare: f5f63600
[ 107.969144] cx23885[0]/0: cx23885_buf_prepare: f5f636c0
[ 107.969157] cx23885[0]/0: cx23885_buf_prepare: f5f63780
[ 107.969168] cx23885[0]/0: cx23885_buf_prepare: f5f63840
--
[ 114.103113] cx23885[0]/0: queue is not empty - append to active
[ 114.103117] cx23885[0]/0: [f5f64600/30] cx23885_buf_queue - append to
active
[ 114.111464] cx23885[0]/0: queue is not empty - append to active
[ 114.111469] cx23885[0]/0: [f5f646c0/31] cx23885_buf_queue - append to
active
[ 114.119793] cx23885[0]/0: queue is not empty - append to active
[ 114.119798] cx23885[0]/0: [df9e69c0/0] cx23885_buf_queue - append to
active
[ 114.128148] cx23885[0]/0: queue is not empty - append to active
[ 114.128153] cx23885[0]/0: [f5f63000/1] cx23885_buf_queue - append to
active
[ 114.136484] cx23885[0]/0: queue is not empty - append to active
[ 114.136489] cx23885[0]/0: [f5f630c0/2] cx23885_buf_queue - append to
active
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
next prev parent reply other threads:[~2008-09-05 4:39 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-09-04 23:26 [linux-dvb] Compro VideoMate E650 hybrid PCIe DVB-T and analog TV/FM capture card stev391
2008-09-05 4:17 ` Thomas Goerke
2008-09-05 4:40 ` Thomas Goerke [this message]
2008-09-05 13:23 ` Steven Toth
-- strict thread matches above, loose matches on Subject: below --
2008-09-07 1:44 stev391
2008-09-07 1:24 stev391
2008-09-07 0:29 stev391
2008-09-07 1:06 ` Thomas Goerke
2008-09-05 22:13 stev391
2008-09-06 4:56 ` Thomas Goerke
2008-09-01 0:12 stev391
2008-09-02 16:15 ` Steven Toth
2008-08-30 22:08 stev391
2008-08-30 1:24 stev391
2008-08-30 3:35 ` Thomas Goerke
2008-08-30 4:03 ` Thomas Goerke
2008-08-30 14:30 ` Steven Toth
2008-08-31 5:29 ` jackden
2008-08-31 11:22 ` Thomas Goerke
2008-08-31 22:10 ` Steven Toth
2008-08-28 11:26 stev391
2008-08-28 15:12 ` Thomas Goerke
2008-08-27 6:13 stev391
2008-08-27 10:11 ` Thomas Goerke
2008-08-27 14:07 ` Steven Toth
2008-08-28 0:40 ` Thomas Goerke
2008-08-26 6:50 stev391
2008-08-26 13:40 ` Thomas Goerke
2008-08-25 22:03 stev391
2008-08-26 5:48 ` Thomas Goerke
2008-08-26 13:22 ` jackden
2008-08-24 2:14 stev391
2008-08-22 10:05 jackden
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='007b01c90f11$82483240$86d896c0$@com.au' \
--to=tom@goeng.com.au \
--cc=jackden@gmail.com \
--cc=linux-dvb@linuxtv.org \
--cc=stev391@email.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox