Re: [linux-dvb] Hauppauge WinTV-NOVA-T-500 New Firmware (dvb-usb-dib0700-1.20.fw) causes problems

["Thomas Goerke" <tom@goeng.com.au>]

> 
> Wow, that's so early in the loading process for the device, it's hard
> to see how that can have anything to do with my i2c changes.
> 
> Patrick, do you have any changelogs that describe the differences
> between 1.10 and 1.20 other than the addition of the new i2c API?
> 
> Devin
> 
> --
> Devin J. Heitmueller
> http://www.devinheitmueller.com
> AIM: devinheitmueller

Devin,

I have applied the latest patch, swapped back to the .20firmware and now get
the following output from dmesg:

[   32.161603] Linux video capture interface: v2.00
--
[   32.407733] dib0700: loaded with support for 7 different device-types
[   32.408042] dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in cold
state, will try to load a firmware
[   32.451939] dvb-usb: downloading firmware from file
'dvb-usb-dib0700-1.20.fw'
[   32.654066] dib0700: firmware started successfully.
[   33.157310] dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in warm
state.
[   33.157342] dvb-usb: will pass the complete MPEG2 transport stream to the
software demuxer.
[   33.157430] DVB: registering new adapter (Hauppauge Nova-T 500 Dual
DVB-T)
[   33.221594] dib0700: i2c write error (status = -32)
[   33.221595]
[   33.225841] dib0700: i2c write error (status = -32)
[   33.225841]
[   33.237332] DVB: registering frontend 0 (DiBcom 3000MC/P)...
[   33.237582] dib0700: i2c write error (status = -32)
[   33.237582]
[   33.282556] dib0700: i2c write error (status = -32)
[   33.282557]
[   33.282559] mt2060 I2C read failed
[   33.282587] dvb-usb: will pass the complete MPEG2 transport stream to the
software demuxer.
[   33.282867] DVB: registering new adapter (Hauppauge Nova-T 500 Dual
DVB-T)
[   33.284802] DVB: registering frontend 1 (DiBcom 3000MC/P)...
[   33.285055] dib0700: i2c write error (status = -32)
[   33.285056]
[   33.286178] dib0700: i2c write error (status = -32)
[   33.286179]
[   33.286180] mt2060 I2C read failed
[   33.286242] input: IR-receiver inside an USB DVB receiver as
/devices/pci0000:00/0000:00:1e.0/0000:05:00.2/usb6/6-1/input/input6
[   33.333182] dvb-usb: schedule remote query interval to 150 msecs.
[   33.333186] dvb-usb: Hauppauge Nova-T 500 Dual DVB-T successfully
initialized and connected.
[   33.333286] usbcore: registered new interface driver dvb_usb_dib0700

Please note that the tuners are available within MythTV but are unable to
tune to any channel.

Tom


_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb