linux-media.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Kamil Debski <k.debski@samsung.com>
To: 'Arun Kumar K' <arun.kk@samsung.com>, linux-media@vger.kernel.org
Cc: jtp.park@samsung.com, Sylwester Nawrocki <s.nawrocki@samsung.com>,
	arun.m@samsung.com
Subject: RE: [PATCH] [media] s5p-mfc: Flush DPB buffers during stream off
Date: Thu, 20 Dec 2012 11:53:00 +0100	[thread overview]
Message-ID: <018a01cddea0$2e87fc90$8b97f5b0$%debski@samsung.com> (raw)
In-Reply-To: <1353579355-11994-1-git-send-email-arun.kk@samsung.com>

Hi Arun,

Thank you for your patch. Tested in my environment (Exynos4/MFC5.1)

Best wishes,
-- 
Kamil Debski
Linux Platform Group
Samsung Poland R&D Center


> -----Original Message-----
> From: Arun Kumar K [mailto:arun.kk@samsung.com]
> Sent: Thursday, November 22, 2012 11:16 AM
> To: linux-media@vger.kernel.org
> Cc: k.debski@samsung.com; jtp.park@samsung.com; s.nawrocki@samsung.com;
> arun.m@samsung.com; arun.kk@samsung.com
> Subject: [PATCH] [media] s5p-mfc: Flush DPB buffers during stream off
> 
> Flushing of delay DPB buffers have to be done during stream off.
> In MFC v6, it is done with a risc to host command.
> 
> Signed-off-by: Arun Kumar K <arun.kk@samsung.com>
> Signed-off-by: Arun Mankuzhi <arun.m@samsung.com>

Acked-by: Kamil Debski <k.debski@samsung.com>

> ---
>  drivers/media/platform/s5p-mfc/s5p_mfc.c        |    6 ++++++
>  drivers/media/platform/s5p-mfc/s5p_mfc_common.h |    1 +
>  drivers/media/platform/s5p-mfc/s5p_mfc_dec.c    |   15 +++++++++++++--
>  drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c |   17 +++++++++++----
> --
>  4 files changed, 31 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc.c
> b/drivers/media/platform/s5p-mfc/s5p_mfc.c
> index d3cd738..b73b6f2 100644
> --- a/drivers/media/platform/s5p-mfc/s5p_mfc.c
> +++ b/drivers/media/platform/s5p-mfc/s5p_mfc.c
> @@ -691,6 +691,12 @@ static irqreturn_t s5p_mfc_irq(int irq, void *priv)
>  		s5p_mfc_handle_stream_complete(ctx, reason, err);
>  		break;
> 
> +	case S5P_MFC_R2H_CMD_DPB_FLUSH_RET:
> +		clear_work_bit(ctx);
> +		ctx->state = MFCINST_RUNNING;
> +		wake_up(&ctx->queue);
> +		goto irq_cleanup_hw;
> +
>  	default:
>  		mfc_debug(2, "Unknown int reason\n");
>  		s5p_mfc_hw_call(dev->mfc_ops, clear_int_flags, dev); diff -
> -git a/drivers/media/platform/s5p-mfc/s5p_mfc_common.h
> b/drivers/media/platform/s5p-mfc/s5p_mfc_common.h
> index f02e049..3b9b600 100644
> --- a/drivers/media/platform/s5p-mfc/s5p_mfc_common.h
> +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_common.h
> @@ -145,6 +145,7 @@ enum s5p_mfc_inst_state {
>  	MFCINST_RETURN_INST,
>  	MFCINST_ERROR,
>  	MFCINST_ABORT,
> +	MFCINST_FLUSH,
>  	MFCINST_RES_CHANGE_INIT,
>  	MFCINST_RES_CHANGE_FLUSH,
>  	MFCINST_RES_CHANGE_END,
> diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c
> b/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c
> index eb6a70b..4ba62f6 100644
> --- a/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c
> +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c
> @@ -977,24 +977,35 @@ static int s5p_mfc_stop_streaming(struct
> vb2_queue *q)
>  					S5P_MFC_R2H_CMD_FRAME_DONE_RET, 0);
>  		aborted = 1;
>  	}
> -	spin_lock_irqsave(&dev->irqlock, flags);
>  	if (q->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) {
> +		spin_lock_irqsave(&dev->irqlock, flags);
>  		s5p_mfc_hw_call(dev->mfc_ops, cleanup_queue, &ctx-
> >dst_queue,
>  				&ctx->vq_dst);
>  		INIT_LIST_HEAD(&ctx->dst_queue);
>  		ctx->dst_queue_cnt = 0;
>  		ctx->dpb_flush_flag = 1;
>  		ctx->dec_dst_flag = 0;
> +		spin_unlock_irqrestore(&dev->irqlock, flags);
> +		if (IS_MFCV6(dev) && (ctx->state == MFCINST_RUNNING)) {
> +			ctx->state = MFCINST_FLUSH;
> +			set_work_bit_irqsave(ctx);
> +			s5p_mfc_clean_ctx_int_flags(ctx);
> +			s5p_mfc_hw_call(dev->mfc_ops, try_run, dev);
> +			if (s5p_mfc_wait_for_done_ctx(ctx,
> +				S5P_MFC_R2H_CMD_DPB_FLUSH_RET, 0))
> +				mfc_err("Err flushing buffers\n");
> +		}
>  	}
>  	if (q->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
> +		spin_lock_irqsave(&dev->irqlock, flags);
>  		s5p_mfc_hw_call(dev->mfc_ops, cleanup_queue, &ctx-
> >src_queue,
>  				&ctx->vq_src);
>  		INIT_LIST_HEAD(&ctx->src_queue);
>  		ctx->src_queue_cnt = 0;
> +		spin_unlock_irqrestore(&dev->irqlock, flags);
>  	}
>  	if (aborted)
>  		ctx->state = MFCINST_RUNNING;
> -	spin_unlock_irqrestore(&dev->irqlock, flags);
>  	return 0;
>  }
> 
> diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c
> b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c
> index 3a8cfd9..a47e6db 100644
> --- a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c
> +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c
> @@ -1253,12 +1253,14 @@ int s5p_mfc_init_decode_v6(struct s5p_mfc_ctx
> *ctx)  static inline void s5p_mfc_set_flush(struct s5p_mfc_ctx *ctx,
> int flush)  {
>  	struct s5p_mfc_dev *dev = ctx->dev;
> -	unsigned int dpb;
> -	if (flush)
> -		dpb = READL(S5P_FIMV_SI_CH0_DPB_CONF_CTRL) | (1 << 14);
> -	else
> -		dpb = READL(S5P_FIMV_SI_CH0_DPB_CONF_CTRL) & ~(1 << 14);
> -	WRITEL(dpb, S5P_FIMV_SI_CH0_DPB_CONF_CTRL);
> +
> +	if (flush) {
> +		dev->curr_ctx = ctx->num;
> +		s5p_mfc_clean_ctx_int_flags(ctx);
> +		WRITEL(ctx->inst_no, S5P_FIMV_INSTANCE_ID_V6);
> +		s5p_mfc_hw_call(dev->mfc_cmds, cmd_host2risc, dev,
> +				S5P_FIMV_H2R_CMD_FLUSH_V6, NULL);
> +	}
>  }
> 
>  /* Decode a single frame */
> @@ -1656,6 +1658,9 @@ void s5p_mfc_try_run_v6(struct s5p_mfc_dev *dev)
>  		case MFCINST_HEAD_PARSED:
>  			ret = s5p_mfc_run_init_dec_buffers(ctx);
>  			break;
> +		case MFCINST_FLUSH:
> +			s5p_mfc_set_flush(ctx, ctx->dpb_flush_flag);
> +			break;
>  		case MFCINST_RES_CHANGE_INIT:
>  			s5p_mfc_run_dec_last_frames(ctx);
>  			break;
> --
> 1.7.0.4



      reply	other threads:[~2012-12-20 10:53 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-11-22 10:15 [PATCH] [media] s5p-mfc: Flush DPB buffers during stream off Arun Kumar K
2012-12-20 10:53 ` Kamil Debski [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='018a01cddea0$2e87fc90$8b97f5b0$%debski@samsung.com' \
    --to=k.debski@samsung.com \
    --cc=arun.kk@samsung.com \
    --cc=arun.m@samsung.com \
    --cc=jtp.park@samsung.com \
    --cc=linux-media@vger.kernel.org \
    --cc=s.nawrocki@samsung.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).