Re: [PATCH v6 5/8] clk: qcom: gcc-msm8939: mark Venus core GDSCs as hardware controlled

[Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>]

On 5/10/26 11:47 AM, Erikas Bitovtas wrote:
> Since in downstream kernel VENUS_CORE0_GDSC and VENUS_CORE1_GDSC have a
> device tree property "qcom,supports-hw-trigger", add a HW_CTRL flag
> to these GDSCs to pass their control to hardware.
> 
> Venus core clock cannot be enabled if Venus core GDSCs are switched off.

The downstream device tree suggests the reverse - the venus_coreN GDSCs
refer to venus0_coreN_vcodec0_clk (and venus_gdsc lists
clk_gcc_venus0_axi_clk and clk_gcc_venus0_vcodec0_clk)

> But since they are set to be hardware controlled, they can be switched
> off at any moment. Vote for the Venus core clock to enable it later when
> GDSCs get turned on.

I understand these words but I can't see how they reflect the change

> 
> Signed-off-by: Erikas Bitovtas <xerikasxx@gmail.com>
> ---
>  drivers/clk/qcom/gcc-msm8939.c | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/drivers/clk/qcom/gcc-msm8939.c b/drivers/clk/qcom/gcc-msm8939.c
> index 45193b3d714b..420997b00ae0 100644
> --- a/drivers/clk/qcom/gcc-msm8939.c
> +++ b/drivers/clk/qcom/gcc-msm8939.c
> @@ -3664,6 +3664,7 @@ static struct clk_branch gcc_venus0_vcodec0_clk = {
>  
>  static struct clk_branch gcc_venus0_core0_vcodec0_clk = {
>  	.halt_reg = 0x4c02c,
> +	.halt_check = BRANCH_HALT_SKIP,
>  	.clkr = {
>  		.enable_reg = 0x4c02c,
>  		.enable_mask = BIT(0),
> @@ -3681,6 +3682,7 @@ static struct clk_branch gcc_venus0_core0_vcodec0_clk = {
>  
>  static struct clk_branch gcc_venus0_core1_vcodec0_clk = {
>  	.halt_reg = 0x4c034,
> +	.halt_check = BRANCH_HALT_SKIP,
>  	.clkr = {
>  		.enable_reg = 0x4c034,
>  		.enable_mask = BIT(0),
> @@ -3753,6 +3755,7 @@ static struct gdsc venus_core0_gdsc = {
>  	.pd = {
>  		.name = "venus_core0",
>  	},
> +	.flags = HW_CTRL,
>  	.pwrsts = PWRSTS_OFF_ON,
>  };
>  
> @@ -3761,6 +3764,7 @@ static struct gdsc venus_core1_gdsc = {
>  	.pd = {
>  		.name = "venus_core1",
>  	},
> +	.flags = HW_CTRL,

This should be HW_CTRL_TRIGGER, paired with a change to call
dev_pm_genpd_set_hwmode() in the driver - this currently only happens
in vcodec_control_v4().

Konrad