Re: Bug#854100: libdvbv5-0: fails to tune / scan

[Gregor Jasny <gjasny@googlemail.com>]

Hello,

On 2/4/17 3:35 AM, Marcel Heinz wrote:
> After the upgrade from libdvbv5-0 1.10.1-1 to 1.12.2-2, any applications
> using libdvbv5-0 fail to work with my DVB-S card.
> 
> Output with old dvb-tools / libdvbv5-0 1.10.1-1:
> 
> |$ dvbv5-scan -l UNIVERSAL /usr/share/dvb/dvb-s/Astra-19.2e
> |Using LNBf UNIVERSAL
> |        Europe
> |        10800 to 11800 MHz and 11600 to 12700 MHz
> |	 Dual LO, IF = lowband 9750 MHz, highband 10600	MHz
> |ERROR    command BANDWIDTH_HZ (5) not found during retrieve
> |Cannot calc frequency shift. Either bandwidth/symbol-rate is unavailable (yet).
> |Scanning frequency #1 12551500
> |Lock   (0x1f) Signal= 85,55% C/N= 99,84% postBER= 0
> | [scan runs normally from then on]
> 
> Output with new dvb-tools / libdvbv5-0 1.12.2-2:
> 
> |$ dvbv5-scan -l UNIVERSAL /usr/share/dvb/dvb-s/Astra-19.2e
> |Using LNBf UNIVERSAL
> |        Europe
> |        10800 to 11800 MHz and 11600 to 12700 MHz
> |	 Dual LO, IF = lowband 9750 MHz, highband 10600	MHz
> |ERROR    command BANDWIDTH_HZ (5) not found during retrieve
> |Cannot calc frequency shift. Either bandwidth/symbol-rate is unavailable (yet).
> |Scanning frequency #1 12551500
> |ERROR    FE_SET_PROPERTY: Invalid argument
> |ERROR    dvb_fe_set_parms failed: Invalid argument
> 
> Similarily, kaffeine fails to tune to any channel, or to do a scan.
> Other applications not using libdvbv5-0 (mplayer, tvheadend) still
> work fine with the card.
> 
> DVB device is:
> 
> |$ dmesg | grep DVB
> | [    8.641450] DVB: registering new adapter (FlexCop Digital TV device)
> | [    8.662380] b2c2_flexcop_pci 0000:09:00.0: DVB: registering adapter 0 frontend 0 (Conexant CX24123/CX24109)...
> | [    8.662664] b2c2-flexcop: initialization of 'Sky2PC/SkyStar 2 DVB-S rev 2.8' at the 'PCI' bus controlled by a 'FlexCopIIb' complete
> 
> -- System Information:
> Debian Release: 9.0
>   APT prefers testing
>   APT policy: (500, 'testing')
> Architecture: amd64 (x86_64)
> Foreign Architectures: i386
> 
> Kernel: Linux 4.9.0-1-amd64 (SMP w/4 CPU cores)
> Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
> Shell: /bin/sh linked to /bin/dash
> Init: systemd (via /run/systemd/system)

Mauro, do you have an idea why tuning broke?

Thanks,
Gregor