From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from nm18-vm1.bullet.mail.ukl.yahoo.com ([217.146.183.112]:42969 "HELO nm18-vm1.bullet.mail.ukl.yahoo.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with SMTP id S1752350Ab0KIUrS convert rfc822-to-8bit (ORCPT ); Tue, 9 Nov 2010 15:47:18 -0500 Message-ID: <110420.78541.qm@web25408.mail.ukl.yahoo.com> References: <1268788483.1536.24.camel@destiny> <20101109194904.107230@gmx.net> Date: Tue, 9 Nov 2010 20:47:15 +0000 (GMT) From: fabio tirapelle Subject: Re: Hauppauge WinTV HVR-1400 (XC3028L) firmware loading problem To: Alina Friedrichsen , linux-media@vger.kernel.org In-Reply-To: <20101109194904.107230@gmx.net> MIME-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 8BIT List-ID: Sender: > > Hi, > > beginning with kernel 2.6.34.? the HVR-1400 stops working completely. > If I run the scan utility, only the fist tuning works and after that it fails >always. On the next run of the utility it says "Device or resource busy". >Watching TV with vlc works never. I think that all the WinTV-HVR will be effected by theese problems. See thread "Wintv-HVR-1120 woes" > > This bug persist up to the current developer kernel 2.6.37-rc1-git7. > > Any ideas? Maybe it's a PCIe/ExpressCard related problem? Some more > popular USB sticks use the same chipset. > > Regards, > Alina > > -------- Original-Nachricht -------- > > Datum: Wed, 17 Mar 2010 02:14:43 +0100 > > Von: Alina Friedrichsen > > An: linux-media@vger.kernel.org > > Betreff: Hauppauge WinTV HVR-1400 firmware loading problem > > > My kernel is 2.6.33. > > When I want to watch DVB-T with VLC, loading the firmwares stops after > > the following and don't see any pictures: > > > > cx23885 0000:03:00.0: firmware: requesting xc3028L-v36.fw > > xc2028 3-0064: Loading 81 firmware images from xc3028L-v36.fw, type: > > xc2028 firmware, ver 3.6 > > xc2028 3-0064: Loading firmware for type=BASE F8MHZ (3), id > > 0000000000000000. > > xc2028 3-0064: Loading firmware for type=D2633 DTV7 (90), id > > 0000000000000000. > > > > And hangs forever. Any retries has the same effect. > > > > But if I start "scan /usr/share/dvb/dvb-t/de-Berlin" the tuning fails > > two times, then all firmwares load correctly and scanning works. > > > > xc2028 3-0064: Loading firmware for type=BASE F8MHZ (3), id > > 0000000000000000. > > xc2028 3-0064: Loading firmware for type=D2633 DTV7 (90), id > > 0000000000000000. > > xc2028 3-0064: Loading firmware for type=BASE F8MHZ (3), id > > 0000000000000000. > > xc2028 3-0064: Loading firmware for type=D2633 DTV7 (90), id > > 0000000000000000. > > xc2028 3-0064: Loading firmware for type=D2633 DTV78 (110), id > > 0000000000000000. > > xc2028 3-0064: Loading SCODE for type=DTV78 DTV8 DIBCOM52 SCODE > > HAS_IF_5200 (61000300), id 0000000000000000. > > > > After that all other firmware loadings works fine and I can watch TV. > > > > Any idea whats goes wrong? Is this a problem of the driver, or is my > > express card broken? I unfortunately has no other card to test. > > > > Thanks! > > Alina > > > > > > > -- > To unsubscribe from this list: send the line "unsubscribe linux-media" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html >