From: Detlev Casanova <detlev.casanova@collabora.com>
To: Linux Media Mailing List <linux-media@vger.kernel.org>,
Hans Verkuil <hverkuil@xs4all.nl>
Cc: "Arnd Bergmann" <arnd@arndb.de>,
"Jernej Škrabec" <jernej.skrabec@gmail.com>
Subject: Re: [GIT PULL FOR v6.9] Various fixes and enhancements
Date: Wed, 14 Feb 2024 11:40:49 -0500 [thread overview]
Message-ID: <11131784.CDJkKcVGEf@arisu> (raw)
In-Reply-To: <12e4850c-0ae2-4d9f-83b7-8c762e6e3756@xs4all.nl>
[-- Attachment #1: Type: text/plain, Size: 8317 bytes --]
Hi Hans,
I see that my visl patches on that branch are the v4. But I recently sent a
v5, fixing a checkpatch warning (but also fixed by you) and removing unnecessary
code changes: https://lore.kernel.org/linux-media/20240117151202.405426-1-detlev.casanova@collabora.com/
These are not big changes, so I don't mind keeping v4 and dropping v5 if that
is easier for you.
Regards,
Detlev
On Wednesday, February 14, 2024 10:17:54 A.M. EST Hans Verkuil wrote:
> If there are no comments, then I'll push this tomorrow or Friday.
>
> Regards,
>
> Hans
>
> The following changes since commit 8c64f4cdf4e6cc5682c52523713af8c39c94e6d5:
>
> media: edia: dvbdev: fix a use-after-free (2024-02-07 06:06:03 +0100)
>
> are available in the Git repository at:
>
> git://linuxtv.org/hverkuil/media_tree.git tags/br-v6.9d
>
> for you to fetch changes up to 10a934521ad37903bc290ed9b5fac5cd3c1e26a0:
>
> media: v4l: marvell: select CONFIG_V4L2_ASYNC where needed (2024-02-14
> 16:14:11 +0100)
>
> ----------------------------------------------------------------
> Tag branch
>
> ----------------------------------------------------------------
> Andrzej Pietrasiewicz (1):
> media: videobuf2: Add missing doc comment for waiting_in_dqbuf
>
> Arnd Bergmann (3):
> media: sta2x11: fix irq handler cast
> media: pvrusb2: fix pvr2_stream_callback casts
> media: v4l: marvell: select CONFIG_V4L2_ASYNC where needed
>
> Changhuang Liang (1):
> staging: media: starfive: Set 16 bpp for capture_raw device
>
> Colin Ian King (2):
> media: tda18271: remove redundant assignment to variable bcal
> media: i2c: st-vgxy61: remove redundant initialization of pointer mode
>
> Daniil Dulov (2):
> media: go7007: add check of return value of go7007_read_addr()
> media: pvrusb2: remove redundant NULL check
>
> Detlev Casanova (4):
> media: visl,vidtv: Set parameters permissions to 0444
> media: visl: Add a tpg_verbose parameter
> doc: media: visl: Document tpg_verbose parameter
> media: visl: Add codec specific variability on output frames
>
> Hans Verkuil (3):
> media: staging: imx: controls are from another device, mark this
> media: v4l2-ctrls-core.c: check min/max for menu, controls
> media: core: v4l2-ioctl.c: use is_valid_ioctl()
>
> Hsia-Jun(Randy) Li (1):
> media: v4l2-mem2mem: fix mem order in last buf
>
> Jernej Skrabec (4):
> media: cedrus: h265: Fix configuring bitstream size
> media: sun8i-di: Fix coefficient writes
> media: sun8i-di: Fix power on/off sequences
> media: sun8i-di: Fix chroma difference threshold
>
> Kells Ping (1):
> media: platform: cros-ec: Add Dita to the match table
>
> Kevin Hao (3):
> media: dvb_frontend: Use wait_event_freezable_timeout() for freezable
> kthread media: msp3400: Use wait_event_freezable_timeout() in msp_sleep()
> media: pvrusb2: Use wait_event_freezable() for freezable kthread
>
> Lucas Stach (1):
> media: imx: csc/scaler: fix v4l2_ctrl_handler memory leak
>
> Markus Elfring (1):
> media: ti: Use devm_platform_ioremap_resource() in ti_csi2rx_probe()
>
> Matthias Schwarzott (1):
> media: zl10036: Fix my email address
>
> Ming Qian (2):
> media: imx-jpeg: Support for negotiating bytesperline with client
> media: amphion: Abort vpu parsing directly in seek
>
> Niklas Söderlund (1):
> media: rcar-csi2: Move driver to renesas directory
>
> Ricardo B. Marliere (1):
> media: bt8xx: make bttv_sub_bus_type const
>
> Vincenzo Mezzela (1):
> docs: media: fix typo in docs
>
> XueBing Chen (4):
> media: dvb-frontends: Clean up errors in cx24110.h
> media: stv6110x: Clean up errors in stv6110x.h
> media: Clean up errors in bcm3510_priv.h
> media: dvb-frontends: Clean up errors in tda8083.h
>
> Yang Li (1):
> media: mediatek: vcodec: Remove unneeded semicolon
>
> Documentation/admin-guide/media/visl.rst |
> 12 +- Documentation/driver-api/media/v4l2-subdev.rst
> | 2 +- MAINTAINERS
> | 1 + drivers/media/cec/platform/cros-ec/cros-ec-cec.c
> | 2 + drivers/media/dvb-core/dvb_frontend.c
> | 13 +- drivers/media/dvb-frontends/bcm3510_priv.h
> | 6 +-
> drivers/media/dvb-frontends/cx24110.h |
> 8 +- drivers/media/dvb-frontends/stv6110x_priv.h
> | 8 +- drivers/media/dvb-frontends/tda8083.h
> | 8 +- drivers/media/dvb-frontends/zl10036.c
> | 2 +- drivers/media/dvb-frontends/zl10036.h
> | 2 +- drivers/media/i2c/msp3400-driver.c
> | 20 +--
> drivers/media/i2c/msp3400-driver.h |
> 2 +- drivers/media/i2c/st-vgxy61.c
> | 2 +- drivers/media/pci/bt8xx/bttv-gpio.c
> | 2 +- drivers/media/pci/bt8xx/bttvp.h
> | 2 +- drivers/media/pci/sta2x11/sta2x11_vip.c
> | 9 +- drivers/media/platform/amphion/vdec.c
> | 4 +-
> drivers/media/platform/marvell/Kconfig |
> 2 +
> drivers/media/platform/mediatek/vcodec/decoder/mtk_vcodec_dec_stateless.c |
> 14 +- drivers/media/platform/nxp/imx-jpeg/mxc-jpeg.c
> | 16 ++ drivers/media/platform/nxp/imx-jpeg/mxc-jpeg.h
> | 1 + drivers/media/platform/renesas/Kconfig
> | 16 ++ drivers/media/platform/renesas/Makefile
> | 1 + drivers/media/platform/renesas/{rcar-vin
> => }/rcar-csi2.c | 0
> drivers/media/platform/renesas/rcar-vin/Kconfig |
> 16 -- drivers/media/platform/renesas/rcar-vin/Makefile
> | 1 - drivers/media/platform/sunxi/sun8i-di/sun8i-di.c
> | 69 ++++----
> drivers/media/platform/ti/j721e-csi2rx/j721e-csi2rx.c |
> 5 +- drivers/media/test-drivers/vidtv/vidtv_bridge.c
> | 26 +-- drivers/media/test-drivers/visl/visl-core.c
> | 15 +- drivers/media/test-drivers/visl/visl-dec.c
> | 344 +++++++++++++++++++++++-----------------
> drivers/media/test-drivers/visl/visl.h |
> 1 + drivers/media/tuners/tda18271-fe.c
> | 1 - drivers/media/usb/go7007/go7007-usb.c
> | 4 +- drivers/media/usb/pvrusb2/pvrusb2-context.c
> | 8 +- drivers/media/usb/pvrusb2/pvrusb2-dvb.c
> | 12 +- drivers/media/usb/pvrusb2/pvrusb2-v4l2.c
> | 11 +-
> drivers/media/v4l2-core/v4l2-ctrls-api.c |
> 2 +- drivers/media/v4l2-core/v4l2-ctrls-core.c
> | 5 +- drivers/media/v4l2-core/v4l2-ioctl.c
> | 2 +- drivers/media/v4l2-core/v4l2-mem2mem.c
> | 4 +-
> drivers/staging/media/imx/imx-media-csc-scaler.c |
> 1 + drivers/staging/media/imx/imx-media-fim.c
> | 2 +- drivers/staging/media/starfive/camss/stf-capture.c
> | 8 +- drivers/staging/media/sunxi/cedrus/cedrus_h265.c
> | 10 +- include/media/videobuf2-core.h
> | 13 +- 47 files changed, 398 insertions(+), 317
> deletions(-)
> rename drivers/media/platform/renesas/{rcar-vin => }/rcar-csi2.c (100%)
[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
next prev parent reply other threads:[~2024-02-14 16:40 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-14 15:17 [GIT PULL FOR v6.9] Various fixes and enhancements Hans Verkuil
2024-02-14 16:32 ` [GIT PULL FOR v6.9] Various fixes and enhancements (#99152) Jenkins
2024-02-14 16:40 ` Detlev Casanova [this message]
2024-02-15 8:22 ` [GIT PULL FOR v6.9] Various fixes and enhancements Hans Verkuil
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=11131784.CDJkKcVGEf@arisu \
--to=detlev.casanova@collabora.com \
--cc=arnd@arndb.de \
--cc=hverkuil@xs4all.nl \
--cc=jernej.skrabec@gmail.com \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox