From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from outbound.icp-qv1-irony-out1.iinet.net.au ([203.59.1.108]) by www.linuxtv.org with esmtp (Exim 4.63) (envelope-from ) id 1JXc2j-0007yi-Jj for linux-dvb@linuxtv.org; Fri, 07 Mar 2008 13:51:22 +0100 From: timf To: linux-dvb@linuxtv.org Date: Fri, 07 Mar 2008 21:51:21 +0900 Message-Id: <1204894281.10536.8.camel@ubuntu> Mime-Version: 1.0 Subject: [linux-dvb] Kworld DVB-T 210 - dvb tuning problem List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: linux-dvb-bounces@linuxtv.org Errors-To: linux-dvb-bounces+mchehab=infradead.org@linuxtv.org List-ID: Hi Hartmut, I noticed you had a bit to do with implementing this card. With a fresh install of ubuntu 7.10 (kernel i386 2.6.22-14-generic), the card is auto recognised as: Kworld DVB-T 210 (card=114) However, tda1004 firmware does not load. Used download-firmware, placed dvb-fe-tda10046.fw into /lib/firmware/2.6.22-14-generic Rebooted. Now, again card is recognised, firmware recognised as version 20. Here is the strange part: - using dvb-utils scan, each time I run that I get a different result in channels. - I try to scan with Kaffeine - nothing - I try to scan with Me-tv - nothing - I try to scan with tvtime - all channels obtained ( no audio). Now, after reboot, if I first start tvtime (analog tv), view a channel, turn tvtime off, and then : - if I place a previously good channels.dvb in Kaffeine - it plays all channels. - if I place a previously good channels.conf in Me-tv - it plays all channels. Would it be correct to say that the "switch" is not working for DVB after boot? I have studied the code, but I need your help to point me in the right direction. Thanks, Tim _______________________________________________ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb