From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail1.ks.pochta.ru ([82.204.219.181]) by www.linuxtv.org with esmtp (Exim 4.63) (envelope-from ) id 1Jca9f-00054Y-8e for linux-dvb@linuxtv.org; Fri, 21 Mar 2008 06:51:05 +0100 Received: from [82.162.56.29] (helo=[192.168.1.2]) by mail1.ks.pochta.ru ( sendmail 8.13.3/8.13.1) with esmtpa id 1Jca7f-0006Qd-Gp for linux-dvb@linuxtv.org; Fri, 21 Mar 2008 08:48:59 +0300 From: Igor Alexeiuk To: linux-dvb@linuxtv.org Date: Fri, 21 Mar 2008 15:49:51 +1000 Message-Id: <1206078591.12241.28.camel@localhost> Mime-Version: 1.0 Subject: Re: [linux-dvb] Any chance of help with v4l-dvb-experimental / Avermedia A16D please? List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: linux-dvb-bounces@linuxtv.org Errors-To: linux-dvb-bounces+mchehab=infradead.org@linuxtv.org List-ID: Hi, > On Fri, 21 Mar 2008, timf wrote: > > > [ 51.446308] xc2028 2-0061: Device is Xceive 3028 version 1.0, firmware version 2.7 > > Ok, xc3028 loaded the firmware. This means that reset GPIO's are correct. > > > Info: - have /dev/video0 > > - tvtime - no signal > > - have soundcard > > There are some possibilities: > > 1) This board doesn't work with firmware version 2.7; > > 2) GPIO's are wrong; > > 3) vmux value is wrong. > > I guess the issue is with the firmware version. Probably, it will need an > earlier version. In addition to Tim's info/report: While my dmesg looks similar to what Tim posted here , there is more ( perhaps useful ) messages: 1) On try to tune analog radio it looks like this: xc2028 0-0061: load_firmware called xc2028 0-0061: seek_firmware called, want type=BASE FM (401), id 0000000000000000. xc2028 0-0061: Found firmware for type=BASE FM (401), id 0000000000000000. xc2028 0-0061: Loading firmware for type=BASE FM (401), id 0000000000000000. xc2028 0-0061: i2c output error: rc = -5 (should be 64) xc2028 0-0061: -5 returned from send xc2028 0-0061: Error -22 while loading base firmware 2) on try to tune analog tv : xc2028 0-0061: check_firmware called xc2028 0-0061: checking firmware, user requested type=F8MHZ MTS (6), id 00000000000000ff, scode_tbl (0), scode_nr 0 xc2028 0-0061: load_firmware called xc2028 0-0061: seek_firmware called, want type=BASE F8MHZ MTS (7), id 0000000000000000. xc2028 0-0061: Found firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. xc2028 0-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. xc2028 0-0061: i2c output error: rc = -5 (should be 64) xc2028 0-0061: -5 returned from send xc2028 0-0061: Error -22 while loading base firmware BTW: I tried firmware v25 - unfortunately it failed with this: xc2028 0-0061: Reading firmware xc3028-v25.fw xc2028 0-0061: Loading 60 firmware images from xc3028-v25.fw, type: xc2028 firmware, ver 2.5 xc2028 0-0061: Reading firmware type BASE F8MHZ (3), id 0, size=6621. xc2028 0-0061: Reading firmware type BASE F8MHZ MTS (7), id 0, size=6617. xc2028 0-0061: Reading firmware type BASE FM (401), id 0, size=6517. xc2028 0-0061: Reading firmware type BASE FM INPUT1 (c01), id 0, size=6531. xc2028 0-0061: Reading firmware type BASE (1), id 0, size=6611. xc2028 0-0061: Reading firmware type BASE MTS (5), id 0, size=6595. xc2028 0-0061: Reading firmware type (0), id 100000007, size=161. xc2028 0-0061: Firmware type INIT1 F8MHZ D2620 DTV7 (408a), id 2012d00022000 is corrupted (size=10946, expected 786712) xc2028 0-0061: Error: firmware file is corrupted! xc2028 0-0061: Releasing partially loaded firmware file. Any suggestions ? Igor. _______________________________________________ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb