From: Julien Rebetez <julien@fhtagn.net>
To: linux-dvb@linuxtv.org
Subject: [linux-dvb] Yuan EC372S no frontend
Date: Mon, 07 Apr 2008 20:07:04 +0300 [thread overview]
Message-ID: <1207588024.14924.12.camel@silver-laptop> (raw)
[-- Attachment #1: Type: text/plain, Size: 420 bytes --]
Hello,
I have some problems with a Yuan EC372S card. I am using the latest (rev
7499:1abbd650fe07) v4l-dvb from mercurial head.
The card is correctly detected and the firmware loaded but no frontend
is attached to it.
I'm running kernel 2.6.22-14-generic on an Ubuntu Gutsy.
I have attached the relevant output of dmesg and lsusb -v and of course
I'll be glad to give more informations if needed.
Regards,
Julien
[-- Attachment #2: usb.txt --]
[-- Type: text/plain, Size: 3064 bytes --]
Bus 006 Device 004: ID 1164:1edc YUAN High-Tech Development Co., Ltd
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x1164 YUAN High-Tech Development Co., Ltd
idProduct 0x1edc
bcdDevice 1.00
iManufacturer 1 YUANRD
iProduct 2 STK7700D
iSerial 3 0000000001
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 46
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 4
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)
[-- Attachment #3: dmesg.txt --]
[-- Type: text/plain, Size: 775 bytes --]
[ 6880.516000] dib0700: loaded with support for 7 different device-types
[ 6880.516000] dvb-usb: found a 'Yuan EC372S' in cold state, will try to load a firmware
[ 6880.520000] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.10.fw'
[ 6880.624000] dib0700: firmware started successfully.
[ 6881.128000] dvb-usb: found a 'Yuan EC372S' in warm state.
[ 6881.128000] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 6881.128000] DVB: registering new adapter (Yuan EC372S)
[ 6881.220000] dvb-usb: no frontend was attached by 'Yuan EC372S'
[ 6881.220000] dvb-usb: Yuan EC372S successfully initialized and connected.
[ 6881.220000] dib0700: ir protocol setup failed
[ 6881.220000] usbcore: registered new interface driver dvb_usb_dib0700
[-- Attachment #4: Type: text/plain, Size: 150 bytes --]
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
next reply other threads:[~2008-04-07 17:07 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-04-07 17:07 Julien Rebetez [this message]
2008-04-07 21:14 ` [linux-dvb] Yuan EC372S no frontend Albert Comerma
2008-04-07 23:25 ` Antti Palosaari
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1207588024.14924.12.camel@silver-laptop \
--to=julien@fhtagn.net \
--cc=linux-dvb@linuxtv.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox