From: Sigmund Augdal <sigmund@snap.tv>
To: linux-dvb@linuxtv.org
Cc: Hartmut Hackmann <hartmut.hackmann@t-online.de>,
Arthur Konovalov <kasjas@hot.ee>
Subject: Re: [linux-dvb] TT-Budget C-1501
Date: Thu, 17 Apr 2008 10:53:26 +0200 [thread overview]
Message-ID: <1208422406.12385.295.camel@rommel.snap.tv> (raw)
In-Reply-To: <48065CB6.50709@elfarto.com>
Hi,
I have also added support for this card based on the little change you
showed here and some looking around in other drivers. I have gotten
information from technotrend that the proper i2c address for the tuner
is 0x61 (or 0xc2 as these adresses sometimes appear shifted for some
reason). With this address and the tuner driver loaded in debug mode I
seem to get some more response from the tuner, but still no lock.
Now looking at the tda827x.c sources it seems this driver was
specifically written for dvb-t usage, and I'm uncertain wether it would
work out of the box for dvb-c. There are also some parts of the code I
don't understand, for instance the agcf callback. Harmut, do you know
anything more about this? The AGC2 gain value that is printed in debug
usually show 4 or 5 now, does this indicate a good signal or a bad
signal?
Also there is still the occational i2c timeouts that Stephen reported.
I'm not sure wether they are caused by the tuner or the demod, but they
appear to come so seldom that it should be able to complete a tuning
cycle. Any feedback on this would be welcome as well. Maybe Oliver has
some suggestions how to debug this?
Best regards
Sigmund Augdal
ons, 16.04.2008 kl. 21.08 +0100, skrev Stephen Dawkins:
> Arthur Konovalov wrote:
> > Stephen Dawkins wrote:
> >
> >>>>I'm not entirely sure what I need todo next to get it working, any help
> >>>>will be greatly appreciated.
> >>>
> >>>See m920x.c or saa7134-dvb.c for drivers using tda10046 and/or tda827x.
> >>>
> >>
> >>I will take a look at them.
> >>
> >
> > Hi,
> > do You have progress in that direction?
> > I'll very concerned, because I have this card too.
> >
> > Arthur
> >
>
> Not yet I'm afraid.
>
> Regards
> Stephen
>
> >
> > _______________________________________________
> > linux-dvb mailing list
> > linux-dvb@linuxtv.org
> > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
> >
>
> _______________________________________________
> linux-dvb mailing list
> linux-dvb@linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
>
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
next prev parent reply other threads:[~2008-04-17 8:53 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-04-12 17:58 [linux-dvb] TT-Budget C-1501 Stephen Dawkins
2008-04-13 1:49 ` Oliver Endriss
2008-04-13 10:22 ` Stephen Dawkins
2008-04-14 20:47 ` Arthur Konovalov
2008-04-16 20:08 ` Stephen Dawkins
2008-04-17 8:53 ` Sigmund Augdal [this message]
2008-04-17 10:24 ` Stephen Dawkins
2008-04-17 20:15 ` Hartmut Hackmann
2008-04-17 20:31 ` Stephen Dawkins
2008-04-17 21:31 ` Hartmut Hackmann
2008-04-18 8:11 ` Stephen Dawkins
2008-04-22 11:07 ` Sigmund Augdal
2008-04-22 13:04 ` Stephen Dawkins
2008-04-22 15:34 ` e9hack
2008-04-22 20:49 ` Hartmut Hackmann
2008-04-23 10:16 ` Sigmund Augdal
2008-05-03 16:11 ` Antti Palosaari
2008-04-18 8:40 ` Sigmund Augdal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1208422406.12385.295.camel@rommel.snap.tv \
--to=sigmund@snap.tv \
--cc=hartmut.hackmann@t-online.de \
--cc=kasjas@hot.ee \
--cc=linux-dvb@linuxtv.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox