From: allan k <sonofzev@iinet.net.au>
To: stev391@email.com
Cc: linux-dvb <linux-dvb@linuxtv.org>
Subject: Re: [linux-dvb] DViCO Fusion HDTV DVB-T Dual Express - When will it be
Date: Wed, 14 May 2008 09:37:44 +1000 [thread overview]
Message-ID: <1210721864.14631.14.camel@media1> (raw)
In-Reply-To: <20080513085753.5AD4411581F@ws1-7.us4.outblaze.com>
Also, just wondering if anyone was planning to look at building lirc
based remote support for the packaged remote (not ir-tty as I don't want
to remap the shortcut keys)
On Tue, 2008-05-13 at 18:57 +1000, stev391@email.com wrote:
> Allan,
>
> If you have used the v4l-dvb hg drivers and my patch the card should
> auto detect, however if you want to force it, the number should be 10.
>
> If you are using Chris Pascoe's xc-test branch then 5 is the correct
> card number, but again it should auto detect.
>
> Please advise which driver source you have been using.
>
> Regards Stephen.
>
> ----- Original Message -----
> From: "allan k"
> To: stev391@email.com
> Subject: Re: [linux-dvb] DViCO Fusion HDTV DVB-T Dual Express
> - When will it be
> Date: Tue, 13 May 2008 18:19:27 +1000
>
>
> Hi Steve
> I had the wrong card number selected. I have changed to card=5
> and the
> tuner is now working correctly.
>
> I haven't restarted the machine, but will do so later and
> confirm
> whether I am getting the same problem as you saw on one of
> your boxes.
>
> cheers
>
> Allan
>
>
>
>
>
>
>
>
> On Sat, 2008-05-10 at 18:14 +1000, stev391@email.com wrote:
> > Allan,
> >
> > It was tested with in two different machines against the
> cx23885
> > version of the card. However the next day I built another
> machine
> > with this card and I ran into errors in my dmesg stating
> that the
> > firmware version doesn't match. I haven't had enough time to
> find out
> > why this has happened, but I think the tuner is not being
> reset
> > properly. What are your results of running this patch?
> >
> > Regards,
> >
> > Stephen
> >
> > ----- Original Message -----
> > From: "sonofzev@iinet.net.au" To:
> > linux-dvb@linuxtv.org, stev391@email.com
> > Subject: Re: [linux-dvb] DViCO Fusion HDTV DVB-T Dual
> Express
> > - When will it be
> > Date: Thu, 08 May 2008 18:02:00 +0800
> >
> >
> > Hi Stephen, Has this been tested with the
> > newer cx23885 version of the
> > card or only the older cx88 version. I have had
> > no success with my cx23885 version. cheers
> >
> > Allan
> >
> >
> > On Tue May 6 11:39 , stev391@email.com sent:
> >
> > G'day,
> >
> > I was just wondering when Chris Pascoe's code for the
> > DViCO Fusion HDTV Dual Express will be merged into the
> > v4l-dvb tree, as there have been some minor updates
> > that increase the stability of the card that are not
> > in his tree.
> >
> > Attached is a patch for merging the relevant sections
> > back into the v4l-dvb tree (and including updating
> > Kconfig). This has been successfully tested on two
> > different PCs with this card (working with gxine and
> > mythtv, in Melbourne, Australia).
> >
> > Regards,
> > Stephen.
> >
> >
> > -- See Exclusive Video: 10th
> > Annual Young Hollywood
> > Awards
> >
> >
> >
> > -- See Exclusive Video: 10th Annual Young Hollywood Awards
> >
>
> --
> See Exclusive Video: 10th Annual Young Hollywood Awards
>
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
next prev parent reply other threads:[~2008-05-13 23:37 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-05-13 8:57 [linux-dvb] DViCO Fusion HDTV DVB-T Dual Express - When will it be stev391
2008-05-13 23:30 ` allan k
2008-05-20 11:21 ` jochen s
2008-05-13 23:37 ` allan k [this message]
-- strict thread matches above, loose matches on Subject: below --
2008-05-14 0:30 stev391
2008-05-13 23:55 stev391
2008-05-14 0:11 ` allan k
2008-05-13 23:52 stev391
2008-05-14 0:14 ` allan k
2008-05-10 8:14 stev391
2008-05-13 7:21 ` allan k
2008-05-13 8:19 ` allan k
2008-05-13 11:22 ` allan k
2008-05-08 10:02 sonofzev
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1210721864.14631.14.camel@media1 \
--to=sonofzev@iinet.net.au \
--cc=linux-dvb@linuxtv.org \
--cc=stev391@email.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox