From: marsupilamies <marsupilamies@free.fr>
To: linux-dvb@linuxtv.org
Subject: [linux-dvb] No frontend when using leadtek dtv dongle gold with last cvs af9015 branch
Date: Wed, 18 Jun 2008 13:25:59 +0200 [thread overview]
Message-ID: <1213788359.8904.5.camel@sat> (raw)
Hi,
I've just compiled the last cvs branch of af9015.
But when I plug the dongle I've this:
[ 3588.095563] usb 4-6: new high speed USB device using ehci_hcd
and
address 11
[ 3588.232504] usb 4-6: configuration #1 chosen from 1 choice
[ 3588.232950] af9015_usb_probe: interface:0
[ 3588.234439] af9015_read_config: IR mode:1
[ 3588.235928] af9015_read_config: TS mode:0
[ 3588.239558] af9015_read_config: [0] xtal:2 set
adc_clock:28000
[ 3588.247095] af9015_read_config: [0] IF1:4300
[ 3588.250881] af9015_read_config: [0] MT2060 IF1:0
[ 3588.253348] af9015_read_config: [0] tuner id:156
[ 3588.253907] af9015_identify_state: reply:02
[ 3588.253912] dvb-usb: found a 'Leadtek WinFast DTV Dongle
Gold' in
warm state.
[ 3588.254034] dvb-usb: will pass the complete MPEG2 transport
stream to
the software demuxer.
[ 3588.254370] DVB: registering new adapter (Leadtek WinFast DTV
Dongle
Gold)
[ 3588.254844] af9015_af9013_frontend_attach: init I2C
[ 3588.254847] af9015_i2c_init:
[ 3588.254871] af9015_eeprom_dump:
[ 3588.278762] 00: 31 c2 bb 0b 00 00 00 00 13 04 29 60 00 02 01
02
[ 3588.313482] 10: 00 80 00 fa fa 10 40 ef 01 30 31 30 31 30 32
30
[ 3588.345396] 20: 35 30 35 30 30 30 30 31 ff ff ff ff ff ff ff
ff
[ 3588.369301] 30: 00 00 3a 01 00 08 02 00 cc 10 00 00 9c ff ff
ff
[ 3588.399095] 40: ff ff ff ff ff 08 02 00 1d 8d c4 04 82 ff ff
ff
[ 3588.427625] 50: ff ff ff ff ff 26 00 00 04 03 09 04 10 03 4c
00
[ 3588.454093] 60: 65 00 61 00 64 00 74 00 65 00 6b 00 30 03 57
00
[ 3588.490556] 70: 69 00 6e 00 46 00 61 00 73 00 74 00 20 00 44
00
[ 3588.518653] 80: 54 00 56 00 20 00 44 00 6f 00 6e 00 67 00 6c
00
[ 3588.542630] 90: 65 00 20 00 47 00 6f 00 6c 00 64 00 20 03 30
00
[ 3588.569231] a0: 31 00 30 00 31 00 30 00 31 00 30 00 31 00 30
00
[ 3588.593207] b0: 36 00 30 00 30 00 30 00 30 00 31 00 00 ff ff
ff
[ 3588.617210] c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff
[ 3588.641163] d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff
[ 3588.665138] e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff
[ 3588.689117] f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff
[ 3588.752816] af9013: Unknown symbol __floatsidf
[ 3588.752888] af9013: Unknown symbol __adddf3
[ 3588.752960] af9013: Unknown symbol __fixdfsi
[ 3588.753025] af9013: Unknown symbol __divdf3
[ 3588.753089] af9013: Unknown symbol __muldf3
[ 3588.795881] DVB: Unable to find symbol af9013_attach()
[ 3588.795896] dvb-usb: no frontend was attached by 'Leadtek
WinFast DTV
Dongle Gold'
[ 3588.796034] input: IR-receiver inside an USB DVB receiver
as /devices/pci0000:00/0000:00:10.3/usb4/4-6/input/input19
[ 3588.822739] dvb-usb: schedule remote query interval to 150
msecs.
[ 3588.822754] dvb-usb: Leadtek WinFast DTV Dongle Gold
successfully
initialized and connected.
[ 3588.822759] af9015_init:
[ 3588.822762] af9015_init_endpoint: USB speed:3
[ 3588.834106] af9015_download_ir_table:
[ 3588.915044] input: Leadtek WinFast DTV Dongle Gold
as /devices/pci0000:00/0000:00:10.3/usb4/4-6/4-6:1.1/input/input20
I don't know why I've the "af9013: Unknow symbol"
I'm using a 2.6.24-19 kernel on a ubuntu 8.04.
Maybe the issue is related to this kernel ?
Is anybody can help me ?
Thanks
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
next reply other threads:[~2008-06-18 11:26 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-06-18 11:25 marsupilamies [this message]
2008-06-19 20:43 ` [linux-dvb] No frontend when using leadtek dtv dongle gold with last cvs af9015 branch Antti Palosaari
2008-06-19 21:25 ` [linux-dvb] s2-3200 fec problem? joep
2008-06-20 9:10 ` ChaosMedia > WebDev
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1213788359.8904.5.camel@sat \
--to=marsupilamies@free.fr \
--cc=linux-dvb@linuxtv.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox