From: Kyuma Ohta <whatisthis.sowhat@gmail.com>
To: Hans Verkuil <hverkuil@xs4all.nl>,
ivtv-devel ML <ivtv-devel@ivtvdriver.org>
Cc: Video4Linux ML <video4linux-list@redhat.com>,
Linux Kernel list <linux-kernel@vger.kernel.org>
Subject: Re: [ivtv-devel] [PATCH AVAIL.]ivtv:Crash 2.6.26 with KUROTOSIKOU CX23416-STVLP
Date: Fri, 18 Jul 2008 08:13:45 +0900 [thread overview]
Message-ID: <1216336451.1146.41.camel@melchior> (raw)
In-Reply-To: <200807171758.19702.hverkuil@xs4all.nl>
[-- Attachment #1: Type: text/plain, Size: 1972 bytes --]
Dear Hans,
Thanx for reply.
Hans Verkuil wrote:
> On Thursday 17 July 2008 17:20:14 Kyuma Ohta wrote:
> > Hi,
> > I'm testing 2.6.26/amd64 with Athlon64 x2 Box with
> > KUROTOSIKOU CX23416-STVLP,always crash ivtv driver
> > when loading upd64083 driver.
> > I checked crash dump,this issue cause of loading
> > upd64083.ko with i2c_probed_new_device().
> > So,I fixed ivtv-i2c.c of 2.6.26 vanilla,and
> > fixed *pretty* differnce memory allocation,structure
> > of upd64083.c.
> > I'm running patched 2.6.26 vanilla with below attached
> > patches over 24hrs,and over 10hrs recording from ivtv,
> > not happend anything;-)
> > Please apply below to 2.6.26.x..
> >
> > Best regards,
> > Ohta.
>
> Hi Ohta,
>
> Thanks for the patches. If I'm not mistaken there are several variants
> of this card: without upd* devices, only with upd64083 and with both
> upd devices. Which one do you have?
>
> Can you also show the dmesg output when ivtv loads?
>
> Looking at the four patches, I would say that the only relevant patch is
> the fix-probing patch. If you try it with only that one applied, does
> it still work correct for you? Note that this patch will not work with
> a KUROTOSIKOU card that has no upd* devices at all.
>
> Can you also give me the kernel backtrace when you load ivtv with the
> vanilla 2.6.26? I do not quite understand why it should crash.
>
> Regards,
>
> Hans
>
I have a ivtv card with *both* upd64083 and upd64031a.
I don't still try testing apply only one of patch,only
apply all of...
I attach compressed logs when loading ivtv at boottime,
parallel probing saa7134 v4l2 device,
both applied (successed) ,not applied (failed).
Best regards,
Ohta
E-Mail: whatisthis.sowhat@gmail.com (Public)
Home Page: http://d.hatena.ne.jp/artane/
(Sorry,not maintaining,and written in Japanese only...)
Twitter: Artanejp (Mainly Japanese)
ICQ: 366538955
KEYID: 6B79F95F
FINGERPRINT:
9AB3 8569 6033 FDBE 352B CB6D DBFA B9E2 6B79 F95F
[-- Attachment #2: ivtv-2.6.26-20080716-2011.error.txt.bz2 --]
[-- Type: application/x-bzip, Size: 16118 bytes --]
[-- Attachment #3: ivtv-2.6.26-20080716-2032-success?.txt.bz2 --]
[-- Type: application/x-bzip, Size: 14836 bytes --]
[-- Attachment #4: lspci.txt --]
[-- Type: text/plain, Size: 2542 bytes --]
lspci -n
00:00.0 0500: 10de:03ea (rev a1)
00:01.0 0601: 10de:03e0 (rev a2)
00:01.1 0c05: 10de:03eb (rev a2)
00:01.2 0500: 10de:03f5 (rev a2)
00:02.0 0c03: 10de:03f1 (rev a2)
00:02.1 0c03: 10de:03f2 (rev a2)
00:04.0 0604: 10de:03f3 (rev a1)
00:05.0 0403: 10de:03f0 (rev a2)
00:06.0 0101: 10de:03ec (rev a2)
00:07.0 0680: 10de:03ef (rev a2)
00:08.0 0101: 10de:03f6 (rev a2)
00:08.1 0101: 10de:03f6 (rev a2)
00:09.0 0604: 10de:03e8 (rev a2)
00:18.0 0600: 1022:1100
00:18.1 0600: 1022:1101
00:18.2 0600: 1022:1102
00:18.3 0600: 1022:1103
01:06.0 0200: 10ec:8139 (rev 10)
01:07.0 0480: 1131:7134 (rev 01)
01:08.0 0400: 4444:0016 (rev 01)
01:09.0 0401: 1102:0008
01:0e.0 0c00: 104c:8024
02:00.0 0300: 10de:0404 (rev a1)
---
lspci
00:00.0 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a1)
00:01.0 ISA bridge: nVidia Corporation MCP61 LPC Bridge (rev a2)
00:01.1 SMBus: nVidia Corporation MCP61 SMBus (rev a2)
00:01.2 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a2)
00:02.0 USB Controller: nVidia Corporation MCP61 USB Controller (rev a2)
00:02.1 USB Controller: nVidia Corporation MCP61 USB Controller (rev a2)
00:04.0 PCI bridge: nVidia Corporation MCP61 PCI bridge (rev a1)
00:05.0 Audio device: nVidia Corporation MCP61 High Definition Audio (rev a2)
00:06.0 IDE interface: nVidia Corporation MCP61 IDE (rev a2)
00:07.0 Bridge: nVidia Corporation MCP61 Ethernet (rev a2)
00:08.0 IDE interface: nVidia Corporation MCP61 SATA Controller (rev a2)
00:08.1 IDE interface: nVidia Corporation MCP61 SATA Controller (rev a2)
00:09.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:06.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
01:07.0 Multimedia controller: Philips Semiconductors SAA7134/SAA7135HL Video Broadcast Decoder (rev 01)
01:08.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01)
01:09.0 Multimedia audio controller: Creative Labs SB0400 Audigy2 Value
01:0e.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link)
02:00.0 VGA compatible controller: nVidia Corporation GeForce 8400 GS (rev a1)
[-- Attachment #5: dot.config.2.6.26.bz2 --]
[-- Type: application/x-bzip, Size: 20921 bytes --]
[-- Attachment #6: Type: text/plain, Size: 164 bytes --]
--
video4linux-list mailing list
Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list
next prev parent reply other threads:[~2008-07-17 23:16 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-07-17 15:20 [PATCH AVAIL.]ivtv:Crash 2.6.26 with KUROTOSIKOU CX23416-STVLP Kyuma Ohta
2008-07-17 15:58 ` [ivtv-devel] " Hans Verkuil
2008-07-17 23:13 ` Kyuma Ohta [this message]
2008-07-19 19:08 ` Hans Verkuil
2008-08-03 21:12 ` Hans Verkuil
2008-08-06 13:18 ` Kyuma Ohta
[not found] ` <20080807150738.5b1dde60@hyperion.delvare>
2008-08-10 7:40 ` Kyuma Ohta
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1216336451.1146.41.camel@melchior \
--to=whatisthis.sowhat@gmail.com \
--cc=hverkuil@xs4all.nl \
--cc=ivtv-devel@ivtvdriver.org \
--cc=linux-kernel@vger.kernel.org \
--cc=video4linux-list@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox