* [linux-dvb] how do i get the bt878 driver to show and xc-3028 on 2.6.26-gentoo
@ 2008-09-25 14:28 allan k
2008-09-25 15:11 ` allan k
0 siblings, 1 reply; 3+ messages in thread
From: allan k @ 2008-09-25 14:28 UTC (permalink / raw)
To: linux-dvb
Hi all
>From what I understand I should now be able to get both my Fusion HDTV
lite and Fusion Digital Express (cx23885 with xc-3028) to work from
in-kernel drivers and not use the mercurial tree.
Firstly I can't get the bt-878 driver for the lite card to show... I
know I've done this along time ago, but just can't remember...
Also I've seen some discussion about the xc3028-dvico-au-01.fw and it's
compatibility with 2.6.26 but can't see an answer as to whether it works
or not... any definitive answer or do need to download new firmware from
somewhere?
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [linux-dvb] how do i get the bt878 driver to show and xc-3028 on 2.6.26-gentoo
2008-09-25 14:28 [linux-dvb] how do i get the bt878 driver to show and xc-3028 on 2.6.26-gentoo allan k
@ 2008-09-25 15:11 ` allan k
2008-09-25 17:24 ` allan k
0 siblings, 1 reply; 3+ messages in thread
From: allan k @ 2008-09-25 15:11 UTC (permalink / raw)
To: linux-dvb
Okay ..
It seems I had no trouble with the bt-878... but the xc3028 version of
the fusion dual express doesn't seem to be in the kernel (not listed in
the compatible cards)...
I'm going back to mercurial now.
cheers
Allan
On Fri, 2008-09-26 at 00:28 +1000, allan k wrote:
> Hi all
>
> >From what I understand I should now be able to get both my Fusion HDTV
> lite and Fusion Digital Express (cx23885 with xc-3028) to work from
> in-kernel drivers and not use the mercurial tree.
>
> Firstly I can't get the bt-878 driver for the lite card to show... I
> know I've done this along time ago, but just can't remember...
>
> Also I've seen some discussion about the xc3028-dvico-au-01.fw and it's
> compatibility with 2.6.26 but can't see an answer as to whether it works
> or not... any definitive answer or do need to download new firmware from
> somewhere?
>
>
>
> _______________________________________________
> linux-dvb mailing list
> linux-dvb@linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [linux-dvb] how do i get the bt878 driver to show and xc-3028 on 2.6.26-gentoo
2008-09-25 15:11 ` allan k
@ 2008-09-25 17:24 ` allan k
0 siblings, 0 replies; 3+ messages in thread
From: allan k @ 2008-09-25 17:24 UTC (permalink / raw)
To: linux-dvb
Sorry
I've answered my own questions had to grab the more generic
xc3028-v27.fw to make the card work on the standard v4l-dvb tree to
work.
Would be nice for the analog part to work in Mythtv (maybe it works in
other software) especially the composite input (I guess this is on the
xc2028 part of the card) to encode all my old VHS tapes.
cheers
Allan
On Fri, 2008-09-26 at 01:11 +1000, allan k wrote:
> Okay ..
>
> It seems I had no trouble with the bt-878... but the xc3028 version of
> the fusion dual express doesn't seem to be in the kernel (not listed in
> the compatible cards)...
>
> I'm going back to mercurial now.
>
> cheers
>
> Allan
>
> On Fri, 2008-09-26 at 00:28 +1000, allan k wrote:
> > Hi all
> >
> > >From what I understand I should now be able to get both my Fusion HDTV
> > lite and Fusion Digital Express (cx23885 with xc-3028) to work from
> > in-kernel drivers and not use the mercurial tree.
> >
> > Firstly I can't get the bt-878 driver for the lite card to show... I
> > know I've done this along time ago, but just can't remember...
> >
> > Also I've seen some discussion about the xc3028-dvico-au-01.fw and it's
> > compatibility with 2.6.26 but can't see an answer as to whether it works
> > or not... any definitive answer or do need to download new firmware from
> > somewhere?
> >
> >
> >
> > _______________________________________________
> > linux-dvb mailing list
> > linux-dvb@linuxtv.org
> > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
>
> _______________________________________________
> linux-dvb mailing list
> linux-dvb@linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2008-09-25 17:24 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-09-25 14:28 [linux-dvb] how do i get the bt878 driver to show and xc-3028 on 2.6.26-gentoo allan k
2008-09-25 15:11 ` allan k
2008-09-25 17:24 ` allan k
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox