public inbox for linux-media@vger.kernel.org
 help / color / mirror / Atom feed
* Pinnacle USB Stick 2870
@ 2008-12-17 11:49 Umar
  2008-12-17 13:33 ` Devin Heitmueller
  0 siblings, 1 reply; 2+ messages in thread
From: Umar @ 2008-12-17 11:49 UTC (permalink / raw)
  To: video4linux-list


Hi Dear Members!

I am trying to get my Pinnacle PCTV USB (DVB-T device [eb1a:2870]) to
work on my Slackware 12.1 Linux. I fetched sources from
http://linuxtv.org/hg/v4l-dvb and then did a make, make install and make
load.

After the reboot I did try tvtime. A blank screen is appear there no
picture.

Here is my dmesg logs.

usb 1-6: new high speed USB device using ehci_hcd and address 3
usb 1-6: configuration #1 chosen from 1 choice
em28xx: New device USB 2870 Device @ 480 Mbps (eb1a:2870, interface 0, class
0)
em28xx #0: Identified as Pinnacle PCTV USB 2 (card=3)
em28xx #0: em28xx chip ID = 35
Chip ID is not zero. It is not a TEA5767
tuner' 2-0060: chip found @ 0xc0 (em28xx #0)
em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 70 28 c0 12 81 00 6a 22 00 00
em28xx #0: i2c eeprom 10: 00 00 04 57 02 0d 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 20: 44 00 00 00 f0 10 02 00 00 00 00 00 5b 00 00 00
em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 01 01 00 00 9f 4f a5 4a
em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 22 03 55 00 53 00
em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 37 00 30 00 20 00 44 00
em28xx #0: i2c eeprom 80: 65 00 76 00 69 00 63 00 65 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0xcf6a1fc3
em28xx #0: EEPROM info:
em28xx #0: No audio on board.
em28xx #0: 500mA max power
em28xx #0: Table at 0x04, strings=0x226a, 0x0000, 0x0000
tuner-simple 2-0060: creating new instance
tuner-simple 2-0060: type set to 56 (Philips PAL/SECAM multi (FQ1216AME
MK4))
em28xx #0: Config register raw data: 0xc0
em28xx #0: No AC97 audio processor
em28xx #0: V4L2 device registered as /dev/video0 and /dev/vbi0
em28xx-audio.c: probing for em28x1 non standard usbaudio
em28xx-audio.c: Copyright (C) 2006 Markus Rechberger


Please help what should i do?

Regards,

Umar
-- 
View this message in context: http://n2.nabble.com/Pinnacle-USB-Stick-2870-tp1667543p1667543.html
Sent from the video4linux-list mailing list archive at Nabble.com.

--
video4linux-list mailing list
Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list

^ permalink raw reply	[flat|nested] 2+ messages in thread
* Re: Pinnacle USB Stick 2870
  2008-12-17 11:49 Pinnacle USB Stick 2870 Umar
@ 2008-12-17 13:33 ` Devin Heitmueller
  0 siblings, 0 replies; 2+ messages in thread
From: Devin Heitmueller @ 2008-12-17 13:33 UTC (permalink / raw)
  To: Umar; +Cc: video4linux-list

On Wed, Dec 17, 2008 at 6:49 AM, Umar <unix.co@gmail.com> wrote:
>
> Hi Dear Members!
>
> I am trying to get my Pinnacle PCTV USB (DVB-T device [eb1a:2870]) to
> work on my Slackware 12.1 Linux. I fetched sources from
> http://linuxtv.org/hg/v4l-dvb and then did a make, make install and make
> load.
>
> After the reboot I did try tvtime. A blank screen is appear there no
> picture.
>
> Here is my dmesg logs.
>
> usb 1-6: new high speed USB device using ehci_hcd and address 3
> usb 1-6: configuration #1 chosen from 1 choice
> em28xx: New device USB 2870 Device @ 480 Mbps (eb1a:2870, interface 0, class
> 0)
> em28xx #0: Identified as Pinnacle PCTV USB 2 (card=3)
> em28xx #0: em28xx chip ID = 35
> Chip ID is not zero. It is not a TEA5767
> tuner' 2-0060: chip found @ 0xc0 (em28xx #0)
> em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 70 28 c0 12 81 00 6a 22 00 00
> em28xx #0: i2c eeprom 10: 00 00 04 57 02 0d 00 00 00 00 00 00 00 00 00 00
> em28xx #0: i2c eeprom 20: 44 00 00 00 f0 10 02 00 00 00 00 00 5b 00 00 00
> em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 01 01 00 00 9f 4f a5 4a
> em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 22 03 55 00 53 00
> em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 37 00 30 00 20 00 44 00
> em28xx #0: i2c eeprom 80: 65 00 76 00 69 00 63 00 65 00 00 00 00 00 00 00
> em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0xcf6a1fc3
> em28xx #0: EEPROM info:
> em28xx #0: No audio on board.
> em28xx #0: 500mA max power
> em28xx #0: Table at 0x04, strings=0x226a, 0x0000, 0x0000
> tuner-simple 2-0060: creating new instance
> tuner-simple 2-0060: type set to 56 (Philips PAL/SECAM multi (FQ1216AME
> MK4))
> em28xx #0: Config register raw data: 0xc0
> em28xx #0: No AC97 audio processor
> em28xx #0: V4L2 device registered as /dev/video0 and /dev/vbi0
> em28xx-audio.c: probing for em28x1 non standard usbaudio
> em28xx-audio.c: Copyright (C) 2006 Markus Rechberger
>
>
> Please help what should i do?
>
> Regards,
>
> Umar
> --
> View this message in context: http://n2.nabble.com/Pinnacle-USB-Stick-2870-tp1667543p1667543.html
> Sent from the video4linux-list mailing list archive at Nabble.com.
>
> --
> video4linux-list mailing list
> Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe
> https://www.redhat.com/mailman/listinfo/video4linux-list
>

Hello Umar,

On Sunday I sent a patch to a user for this device for testing.  I am
waiting to hear back from that person.

Work is ongoing for this device, and I hope to have it working soon.
Check back in a few days.

Regards,

Devin

-- 
Devin J. Heitmueller
http://www.devinheitmueller.com
AIM: devinheitmueller

--
video4linux-list mailing list
Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list

^ permalink raw reply	[flat|nested] 2+ messages in thread
end of thread, other threads:[~2008-12-17 13:33 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-12-17 11:49 Pinnacle USB Stick 2870 Umar
2008-12-17 13:33 ` Devin Heitmueller

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox