Re : Re : Re : TT 3650

[Manu <eallaud@gmail.com>]

Le 19.02.2009 04:51:09, Jean-Francois Moine a écrit :
> On Wed, 18 Feb 2009 19:30:37 -0400
> Manu <eallaud@gmail.com> wrote:
> 
> > Le 18.02.2009 15:44:55, Jean-Francois Moine a écrit :
> > > Yes. I use it to look at FTA channels on AB3 5°W:
> > > 
> > > - France 24 (12674.00 H - DVB-S2 - QPSK) is good.
> > > 
> > > - I can also get the transponder 11636.00 V (DVB Newtec - QPSK),
> but
> > > not
> > >   the transponder 11139.00 V (DVB Newtec - 8PSK turbo) 
> > > 
> > > - For some time, there were clear channels (M6 and W9) in the
> > >   transponder 11471.00 V (DVB-S2 - 8PSK). Both were fine.
> > 
> > Just to make things clear, can you prodvide symbol rate and FEC for
> > all these transponders.
> 
> I don't understand the question!
> 
> I think the symbol rate is mandatory, but the FEC may found
> automatically. For example, I use vlc for the 2 different
> transponders:
> 
> #EXTINF:0,orange
> #EXTVLCOPT:dvb-frequency=11512000
> #EXTVLCOPT:dvb-srate=29947000
> #EXTVLCOPT:dvb-voltage=13
> dvb://
> #EXTINF:0,france
> #EXTVLCOPT:dvb-frequency=11590000
> #EXTVLCOPT:dvb-srate=20000000
> #EXTVLCOPT:dvb-voltage=13
> dvb://
> 
> The first transponder is FEC 7/8, and the second 2/3.
> 
> For the other transponders (DVB-S2 / 8PSK), if use szap-s2 +
> dvbstream.

OK great thx, that's what I was asking for! Indeed I have some troubles 
locking on S2 transponders which all have 30 MS/s rate. I see that 
yours are lower, well with one very close to that.
Bye
Emmanuel