Re: Nova-T 500 does not survive reboot

Re: Nova-T 500 does not survive reboot

[Soeren.Moch]

> Apr 29 22:42:41 favia kernel: [   72.272045] ehci_hcd 0000:07:01.2:  
> force halt; handhake ffffc20000666814 00004000 00000000 -> -110
> [...]
> Do you know if the issue is the same with a Nova-TD stick? If it is,
> then I could be able to use debugging as an excuse to buy one, and then
> add 2 tuners to the system when all is done :o)

I had the same "ehci_hcd force halt" error when I was debugging the
Nova-TD dual-stream-switchon-problem:
http://www.mail-archive.com/linux-media@vger.kernel.org/msg04643.html

Reducing the urb count to 1 (as included in the patch) solved the
"ehci_hcd force halt" issue for me.

S:oren

Re: Nova-T 500 does not survive reboot

[Nicolas Will]

On Thu, 2009-04-30 at 13:56 +0200, Soeren.Moch@stud.uni-hannover.de
wrote:
> > Apr 29 22:42:41 favia kernel: [   72.272045] ehci_hcd
> 0000:07:01.2:  
> > force halt; handhake ffffc20000666814 00004000 00000000 -> -110
> > [...]
> > Do you know if the issue is the same with a Nova-TD stick? If it is,
> > then I could be able to use debugging as an excuse to buy one, and
> then
> > add 2 tuners to the system when all is done :o)
> 
> I had the same "ehci_hcd force halt" error when I was debugging the
> Nova-TD dual-stream-switchon-problem:
> http://www.mail-archive.com/linux-media@vger.kernel.org/msg04643.html
> 
> Reducing the urb count to 1 (as included in the patch) solved the
> "ehci_hcd force halt" issue for me.

I mention that the URB part is a quick hack.

You were asking for opinions on that, and apparently did not get any
feedback.

Time for another call?

Nico

Re: Nova-T 500 does not survive reboot

[Nicolas Will]

On Thu, 2009-04-30 at 16:08 +0100, Nicolas Will wrote:
> 
> I mention that the URB part is a quick hack.

*you* mention, I wouldn't dare... ;o)

Nico

Re: Nova-T 500 does not survive reboot

[Soeren Moch]

 >>> Hi,
 >>>    Any news on this? I'd like to try the URB patch someone mentioned,
 >>> but I
 >>> can't find the link.
 >>
 >> http://www.mail-archive.com/linux-media@vger.kernel.org/msg04643.html
 >>
 >> I am running a current dvb tree with this patch.
 >>
 >> so far so good.
 >>
 >> I did not find the time to check if I regained proper reboots, though. I
 >> know, sad excuse...
 >>
 >> nico
 >>
 >>
 >
 > I'll give it a try. Thanks for the tip!
 > Cheers,
 >   Eduard

Hi nico, Eduard,

can you confirm that the patch solves your Nova-T 500 boot problem?
In this case I would resend the buffer count part as separate patch to
Patrick.

S:oren

Re: Nova-T 500 does not survive reboot

[Nicolas Will]

On Fri, 2009-05-22 at 15:30 +0200, Soeren Moch wrote:
> >>> Hi,
>  >>>    Any news on this? I'd like to try the URB patch someone mentioned,
>  >>> but I
>  >>> can't find the link.
>  >>
>  >> http://www.mail-archive.com/linux-media@vger.kernel.org/msg04643.html
>  >>
>  >> I am running a current dvb tree with this patch.
>  >>
>  >> so far so good.
>  >>
>  >> I did not find the time to check if I regained proper reboots, though. I
>  >> know, sad excuse...
>  >>
>  >> nico
>  >>
>  >>
>  >
>  > I'll give it a try. Thanks for the tip!
>  > Cheers,
>  >   Eduard
> 
> Hi nico, Eduard,
> 
> can you confirm that the patch solves your Nova-T 500 boot problem?
> In this case I would resend the buffer count part as separate patch to
> Patrick.

It doesn;t appear to fix it.

I'll retry this evening, after the F1 Grand Prix.

Nico

Nova-T 500 does not survive reboot

[Nicolas Will]

Hello all,

I am running an hg clone from a few days ago with firmware 1.20 on a
64-bit Ubuntu Intrepid (2.6.27 kernel).

I have noticed that for some time now the card/driver/firmware
combination does not like warm reboots.

If I reboot the system and try to use any Nova-T 500 tuner, I
immediately get the mt2060 I2C errors.

If I completely shut down the system, remove the power, then reboot, all
is fine.

I have missed most of the linux-media traffic, I was still stuck on
linux-dvb. Have I missed some discussions about this?

Thanks!

Nico

Re: Nova-T 500 does not survive reboot

[Eduard Huguet]

Nicolas Will <nico <at> youplala.net> writes:

> 
> Hello all,
> 
> I am running an hg clone from a few days ago with firmware 1.20 on a
> 64-bit Ubuntu Intrepid (2.6.27 kernel).
> 
> I have noticed that for some time now the card/driver/firmware
> combination does not like warm reboots.
> 
> If I reboot the system and try to use any Nova-T 500 tuner, I
> immediately get the mt2060 I2C errors.
> 
> If I completely shut down the system, remove the power, then reboot, all
> is fine.
> 
> I have missed most of the linux-media traffic, I was still stuck on
> linux-dvb. Have I missed some discussions about this?
> 
> Thanks!
> 
> Nico
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo <at> vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 
> 


Hi, Nicholas

I posted the very same thing 3 days ago:
http://article.gmane.org/gmane.linux.drivers.video-input-infrastructure/4973


This is something that has been occuring lately, since some months ago. I don't
know when exactly was this bug introduced, but it has been in HG for a couple of
months at least. I can remenber that other guy posted about this issue some time
ago, but I can't find the link.


And for what I see, Janne Grunau is also having problems with the card. See what
he have just posted...:
http://article.gmane.org/gmane.linux.drivers.video-input-infrastructure/4973

Best regards, 
  Eduard Huguet

Re: Nova-T 500 does not survive reboot

[Nicolas Will]

On Thu, 2009-04-30 at 10:16 +0000, Eduard Huguet wrote:
> Nicolas Will <nico <at> youplala.net> writes:
> 
> > 
> > Hello all,
> > 
> > I am running an hg clone from a few days ago with firmware 1.20 on a
> > 64-bit Ubuntu Intrepid (2.6.27 kernel).
> > 
> > I have noticed that for some time now the card/driver/firmware
> > combination does not like warm reboots.
> > 
> > If I reboot the system and try to use any Nova-T 500 tuner, I
> > immediately get the mt2060 I2C errors.
> > 
> > If I completely shut down the system, remove the power, then reboot, all
> > is fine.
> > 
> > I have missed most of the linux-media traffic, I was still stuck on
> > linux-dvb. Have I missed some discussions about this?
> > 
> > Thanks!
> > 
> > Nico
> Hi, Nicholas
> 
> I posted the very same thing 3 days ago:
> http://article.gmane.org/gmane.linux.drivers.video-input-infrastructure/4973

Argh, I missed it (I don't really like gmame's archiving... I will need
to get used to it).

I have the same :


Apr 29 22:42:41 favia kernel: [   72.272045] ehci_hcd 0000:07:01.2: force halt; handhake ffffc20000666814 00004000 00000000 -> -110


then


Apr 29 22:43:02 favia kernel: [   92.900094] mt2060 I2C write failed
Apr 29 22:43:02 favia kernel: [   92.905830] mt2060 I2C write failed (len=2)
Apr 29 22:43:02 favia kernel: [   92.905835] mt2060 I2C write failed (len=6)
Apr 29 22:43:02 favia kernel: [   92.905838] mt2060 I2C read failed
Apr 29 22:43:02 favia kernel: [   92.912552] mt2060 I2C read failed
Apr 29 22:43:02 favia kernel: [   92.920572] mt2060 I2C read failed
Apr 29 22:43:02 favia kernel: [   92.928552] mt2060 I2C read failed
Apr 29 22:43:02 favia kernel: [   92.936554] mt2060 I2C read failed
Apr 29 22:43:02 favia kernel: [   92.944552] mt2060 I2C read failed
...............

and at one point I get the following before I shut down


Apr 29 22:44:27 favia kernel: [  177.818215] dvb-usb: could not submit URB no. 0 - get them all back
Apr 29 22:44:27 favia kernel: [  177.818222] dvb-usb: error while enabling fifo.




> 
> 
> This is something that has been occuring lately, since some months ago. I don't
> know when exactly was this bug introduced, but it has been in HG for a couple of
> months at least. I can remenber that other guy posted about this issue some time
> ago, but I can't find the link.


I'm with that too. I was just really busy at the time to dig into it.



> 
> 
> And for what I see, Janne Grunau is also having problems with the card. See what
> he have just posted...:
> http://article.gmane.org/gmane.linux.drivers.video-input-infrastructure/4973


I saw that one too, it arrived as I subscribed to the proper list.

I'm not directly concerned now, but I will be facing this too when I
will want to upgrade my system to the current Ubuntu release.


Soooooo...

What can I/we do to help track/fix this?

I'm game for a bit of testing, within reason, though, at the system is
in production.

Do you know if the issue is the same with a Nova-TD stick? If it is,
then I could be able to use debugging as an excuse to buy one, and then
add 2 tuners to the system when all is done :o)

Nico
http://www.youplala.net/linux/home-theater-pc/

Re: Nova-T 500 does not survive reboot

[Nicolas Will]

On Thu, 2009-04-30 at 10:16 +0000, Eduard Huguet wrote:
> I can remenber that other guy posted about this issue some time
> ago, but I can't find the link.

http://thread.gmane.org/gmane.linux.drivers.video-input-infrastructure/2423/focus=2591

I guess.

nico
getting used to gmame :o)

Re: Nova-T 500 does not survive reboot

[Eduard Huguet]

Nicolas Will <nico <at> youplala.net> writes:

> 
> Hello all,
> 
> I am running an hg clone from a few days ago with firmware 1.20 on a
> 64-bit Ubuntu Intrepid (2.6.27 kernel).
> 
> I have noticed that for some time now the card/driver/firmware
> combination does not like warm reboots.
> 
> If I reboot the system and try to use any Nova-T 500 tuner, I
> immediately get the mt2060 I2C errors.
> 
> If I completely shut down the system, remove the power, then reboot, all
> is fine.
> 
> I have missed most of the linux-media traffic, I was still stuck on
> linux-dvb. Have I missed some discussions about this?
> 
> Thanks!
> 
> Nico
> 

Hi, 
   Any news on this? I'd like to try the URB patch someone mentioned, but I
can't find the link.

Best regards, 
  Eduard

Re: Nova-T 500 does not survive reboot

[Eduard Huguet]

>> Hi,
>>    Any news on this? I'd like to try the URB patch someone mentioned,
>> but I
>> can't find the link.
>
> http://www.mail-archive.com/linux-media@vger.kernel.org/msg04643.html
>
> I am running a current dvb tree with this patch.
>
> so far so good.
>
> I did not find the time to check if I regained proper reboots, though. I
> know, sad excuse...
>
> nico
>
>

I'll give it a try. Thanks for the tip!
Cheers,
  Eduard