From: jhmoodie@telkomsa.net
To: linux-dvb@linuxtv.org
Subject: [linux-dvb] Gigabyte GT-P8000 dvb-t / analog / fm radio - pci
Date: Fri, 22 May 2009 13:42:43 -0700 [thread overview]
Message-ID: <1243024963.14790.1316818399@webmail.messagingengine.com> (raw)
Does anyone have any information on the support status of this card? Or
perhaps any hints I might try to get it working?
I have built and installed the latest V4L-DVB kernel driver modules, but
no luck.
I noticed windows installs Philips 3xhybrid drivers if this helps...
Product website:
http://www.gigabyte.com.tw/Products/TVCard/Products_Spec.aspx?ClassValue=TV+Card&ProductID=2757&ProductName=GT-P8000
Tuner NXP 18271
Decoder NXP 7131E
lspci -vnn:
00:09.0 Multimedia controller [0480]: Philips Semiconductors
SAA7131/SAA7133/SAA7135 Video Broadcast Decoder [1131:7133] (rev d1)
Subsystem: Giga-byte Technology Device [1458:9004]
Flags: bus master, medium devsel, latency 32, IRQ 11
Memory at e6000000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [40] Power Management version 2
Kernel driver in use: saa7134
Kernel modules: saa7134
dmesg output:
[ 3089.801191] saa7130/34: v4l2 driver version 0.2.15 loaded
[ 3089.801419] saa7133[0]: found at 0000:00:09.0, rev: 209, irq: 11,
latency: 32, mmio: 0xe6000000
[ 3089.801443] saa7133[0]: subsystem: 1458:9004, board: UNKNOWN/GENERIC
[card=0,autodetected]
[ 3089.801656] saa7133[0]: board init: gpio is 40000
[ 3089.952088] saa7133[0]: i2c eeprom 00: 58 14 04 90 54 20 1c 00 43 43
a9
1c 55 d2 b2 92
[ 3089.952125] saa7133[0]: i2c eeprom 10: ff ff ff ff ff 20 ff ff ff ff
ff
ff ff ff ff ff
[ 3089.952153] saa7133[0]: i2c eeprom 20: 01 40 01 02 02 01 01 03 08 ff
00
b3 ff ff ff ff
[ 3089.952180] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff
ff
ff ff ff ff ff
[ 3089.952206] saa7133[0]: i2c eeprom 40: 50 35 00 c0 96 10 05 32 d5 15
0e
00 ff ff ff ff
[ 3089.952233] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff
ff
ff ff ff ff ff
[ 3089.952260] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff
ff
ff ff ff ff ff
[ 3089.952287] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff
ff
ff ff ff ff ff
[ 3089.952314] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff
ff
ff ff ff ff ff
[ 3089.952340] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff
ff
ff ff ff ff ff
[ 3089.952367] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff
ff
ff ff ff ff ff
[ 3089.952394] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff
ff
ff ff ff ff ff
[ 3089.952421] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff
ff
ff ff ff ff ff
[ 3089.952447] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff
ff
ff ff ff ff ff
[ 3089.952474] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff
ff
ff ff ff ff ff
[ 3089.952501] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff
ff
ff ff ff ff ff
[ 3089.953430] saa7133[0]: registered device video0 [v4l2]
[ 3089.953507] saa7133[0]: registered device vbi0
[ 3090.023006] saa7134 ALSA driver for DMA sound loaded
[ 3090.023158] saa7133[0]/alsa: saa7133[0] at 0xe6000000 irq 11
registered
as card -2
--
raincloud@fastmail.fm
--
http://www.fastmail.fm - Email service worth paying for. Try it for free
_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media@vger.kernel.org
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
next reply other threads:[~2009-05-22 20:42 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-05-22 20:42 jhmoodie [this message]
2009-06-23 15:36 ` [linux-dvb] Gigabyte GT-P8000 dvb-t / analog / fm radio - pci c kuruwita
2009-06-23 21:11 ` hermann pitton
2009-06-24 16:31 ` John Moodie
2009-06-24 20:58 ` hermann pitton
-- strict thread matches above, loose matches on Subject: below --
2009-07-16 23:40 Samúel Jón Gunnarsson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1243024963.14790.1316818399@webmail.messagingengine.com \
--to=jhmoodie@telkomsa.net \
--cc=linux-dvb@linuxtv.org \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox