From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from www.youplala.net ([88.191.51.216]:59950 "EHLO mail.youplala.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752564AbZHXQBD (ORCPT ); Mon, 24 Aug 2009 12:01:03 -0400 Received: from [134.32.138.108] (unknown [134.32.138.108]) by mail.youplala.net (Postfix) with ESMTPSA id 76C61D880C8 for ; Mon, 24 Aug 2009 18:00:50 +0200 (CEST) Subject: Re: Nova-TD-500 (84xxx) problems (was Re: dib0700 diversity support) From: Nicolas Will To: linux-media@vger.kernel.org In-Reply-To: References: <1250177934.6590.120.camel@mattotaupa.wohnung.familie-menzel.net> <1250244562.5438.3.camel@mattotaupa.wohnung.familie-menzel.net> <1251042115.19935.16.camel@lychee.local> <4A9296D5.1070202@nildram.co.uk> Content-Type: text/plain Date: Mon, 24 Aug 2009 17:00:49 +0100 Message-Id: <1251129649.5234.42.camel@acropora> Mime-Version: 1.0 Content-Transfer-Encoding: 7bit Sender: linux-media-owner@vger.kernel.org List-ID: On Tue, 2009-08-25 at 00:36 +0930, Malcolm Caldwell wrote: > > Have you tried adding: > > > > dvb_usb_dib0700.force_lna_activation=1 > > > > to the modprobe options? > > > > The device I had wouldn't tune without this. > > I should have mentioned that I have tried this and buggy sfn > workaround for the relavent modules. I have read that sometimes the problem is not a low signal, but too strong a signal. Have you tried placing an attenuator in front of the card? Nico