From: Sandy macDonald <sandy@voytech.biz>
To: linux-media@vger.kernel.org
Subject: Sky2PC Rev. 3.1
Date: Sat, 05 Dec 2009 19:00:30 -0800 [thread overview]
Message-ID: <1260068430.5339.22.camel@bubbles.local> (raw)
Hello:
I've had a Sky2PC (ver 3.1) DVB-S card kicking around for a while and
I'd like to get it operational.
According to the v4l-dvb wiki, this card requires a definition, and to
post the details to the linuxtv mailing list, so here goes..
Thank you.
Sandy MacDonald
On the back of the card:
Model: SKY2PC
P/N: 92105-20101
Rev: 3.1
Serial no. and MAC address
The front of the card:
DBC1201 (on the metal shielding), nothing else.
Main chip: B2C2 Flexcop III
M3B9E-001 0215
lspci -v
01:0e.0 Network controller: Techsan Electronics Co Ltd B2C2 FlexCopIII
DVB chip / Technisat SkyStar2 DVB card (rev 01)
Subsystem: Techsan Electronics Co Ltd Device 2104
Flags: bus master, slow devsel, latency 64, IRQ 10
Memory at f4100000 (32-bit, non-prefetchable) [size=64K]
I/O ports at 3400 [size=32]
lspci -vn
01:0e.0 0280: 13d0:2200 (rev 01)
Subsystem: 13d0:2104
Flags: bus master, slow devsel, latency 64, IRQ 10
Memory at f4100000 (32-bit, non-prefetchable) [size=64K]
I/O ports at 3400 [size=32]
reply other threads:[~2009-12-06 4:20 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1260068430.5339.22.camel@bubbles.local \
--to=sandy@voytech.biz \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox