Re: Which modules for the VP-2033? Where is the module "mantis.ko"?

["Aljaž Prusnik" <prusnik@gmail.com>]

On pon, 2009-12-28 at 21:06 +0100, Aljaž Prusnik wrote:
> On pon, 2009-12-28 at 20:28 +0100, Aljaž Prusnik wrote:
> > On pon, 2009-12-28 at 02:23 +0400, Manu Abraham wrote:
> > > Can you please do a lspci -vn for the Mantis card you have ? Also try
> > > loading the mantis.ko module with verbose=5 module parameter, to get
> > > more debug information.
> > 
> 
> To continue, it seems the module is registering the remote commands, but
> dunno, why irw shows nothing:

Well - to answer myself on this one, it doesn't because there is no
input device registered. I used to have this under input devices
(cat /proc/bus/input/devices):

I: Bus=0001 Vendor=0000 Product=0000 Version=0001
N: Name="Mantis VP-2040 IR Receiver"
P: Phys=pci-0000:03:06.0/ir0
S: Sysfs=/devices/virtual/input/input5
U: Uniq=
H: Handlers=kbd event5
B: EV=100003
B: KEY=108fc330 284204100000000 0 2000000018000 218040000801
9e96c000000000 ffc

So the question is, why is it not registered as an input anymore?

Regards,
Aljaz