Hauppauge WinTV HVR-1400 firmware loading problem

Hauppauge WinTV HVR-1400 firmware loading problem

[Alina Friedrichsen]

[-- Attachment #1: Type: text/plain, Size: 1361 bytes --]

My kernel is 2.6.33.
When I want to watch DVB-T with VLC, loading the firmwares stops after
the following and don't see any pictures:

cx23885 0000:03:00.0: firmware: requesting xc3028L-v36.fw
xc2028 3-0064: Loading 81 firmware images from xc3028L-v36.fw, type:
xc2028 firmware, ver 3.6
xc2028 3-0064: Loading firmware for type=BASE F8MHZ (3), id
0000000000000000.
xc2028 3-0064: Loading firmware for type=D2633 DTV7 (90), id
0000000000000000.

And hangs forever. Any retries has the same effect.

But if I start "scan /usr/share/dvb/dvb-t/de-Berlin" the tuning fails
two times, then all firmwares load correctly and scanning works.

xc2028 3-0064: Loading firmware for type=BASE F8MHZ (3), id
0000000000000000.
xc2028 3-0064: Loading firmware for type=D2633 DTV7 (90), id
0000000000000000.
xc2028 3-0064: Loading firmware for type=BASE F8MHZ (3), id
0000000000000000.
xc2028 3-0064: Loading firmware for type=D2633 DTV7 (90), id
0000000000000000.
xc2028 3-0064: Loading firmware for type=D2633 DTV78 (110), id
0000000000000000.
xc2028 3-0064: Loading SCODE for type=DTV78 DTV8 DIBCOM52 SCODE
HAS_IF_5200 (61000300), id 0000000000000000.

After that all other firmware loadings works fine and I can watch TV.

Any idea whats goes wrong? Is this a problem of the driver, or is my
express card broken? I unfortunately has no other card to test.

Thanks!
Alina




[-- Attachment #2: dmesg.txt --]
[-- Type: text/plain, Size: 63723 bytes --]

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.33 (x-alina@destiny) (gcc version 4.4.3 (Ubuntu 4.4.3-3ubuntu3) ) #1 SMP Sun Mar 14 19:57:25 CET 2010
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.33 root=UUID=9c140ba2-1f4d-4557-abeb-e42b86ad877b ro elevator=deadline quiet splash
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000c7e90000 (usable)
[    0.000000]  BIOS-e820: 00000000c7e90000 - 00000000c7ea8000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000c7ea8000 - 00000000c7ed0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000c7ed0000 - 00000000c7f00000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000138000000 (usable)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI present.
[    0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x138000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 base 0000C0000000 mask FFFFF8000000 write-back
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 0000000138000000 aka 4992M
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820 update range: 00000000c8000000 - 0000000100000000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0xc7e90 max_arch_pfn = 0x400000000
[    0.000000] Scanning 0 areas for low memory corruption
[    0.000000] modified physical RAM map:
[    0.000000]  modified: 0000000000000000 - 0000000000010000 (reserved)
[    0.000000]  modified: 0000000000010000 - 000000000009fc00 (usable)
[    0.000000]  modified: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  modified: 00000000000e6000 - 0000000000100000 (reserved)
[    0.000000]  modified: 0000000000100000 - 00000000c7e90000 (usable)
[    0.000000]  modified: 00000000c7e90000 - 00000000c7ea8000 (ACPI data)
[    0.000000]  modified: 00000000c7ea8000 - 00000000c7ed0000 (ACPI NVS)
[    0.000000]  modified: 00000000c7ed0000 - 00000000c7f00000 (reserved)
[    0.000000]  modified: 00000000fff00000 - 0000000100000000 (reserved)
[    0.000000]  modified: 0000000100000000 - 0000000138000000 (usable)
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: 0000000000000000-00000000c7e90000
[    0.000000]  0000000000 - 00c0000000 page 1G
[    0.000000]  00c0000000 - 00c7e00000 page 2M
[    0.000000]  00c7e00000 - 00c7e90000 page 4k
[    0.000000] kernel direct mapping tables up to c7e90000 @ 16000-19000
[    0.000000] init_memory_mapping: 0000000100000000-0000000138000000
[    0.000000]  0100000000 - 0138000000 page 2M
[    0.000000] kernel direct mapping tables up to 138000000 @ 18000-1a000
[    0.000000] RAMDISK: 341f8000 - 37feffdb
[    0.000000] ACPI: RSDP 00000000000fb860 00024 (v02 ACPIAM)
[    0.000000] ACPI: XSDT 00000000c7e90100 00054 (v01 111909 XSDT1708 20091119 MSFT 00000097)
[    0.000000] ACPI: FACP 00000000c7e90290 000F4 (v03 111909 FACP1708 20091119 MSFT 00000097)
[    0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0000000000000000/1 (20091214/tbfadt-557)
[    0.000000] ACPI: DSDT 00000000c7e90440 0E638 (v01  A1160 A1160000 00000000 INTL 20060113)
[    0.000000] ACPI: FACS 00000000c7ea8000 00040
[    0.000000] ACPI: APIC 00000000c7e90390 0006C (v01 111909 APIC1708 20091119 MSFT 00000097)
[    0.000000] ACPI: MCFG 00000000c7e90400 0003C (v01 111909 OEMMCFG  20091119 MSFT 00000097)
[    0.000000] ACPI: OEMB 00000000c7ea8040 00072 (v01 111909 OEMB1708 20091119 MSFT 00000097)
[    0.000000] ACPI: HPET 00000000c7e9f440 00038 (v01 111909 OEMHPET  20091119 MSFT 00000097)
[    0.000000] ACPI: SSDT 00000000c7e9f480 0088C (v01 A M I  POWERNOW 00000001 AMD  00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] Scanning NUMA topology in Northbridge 24
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-0000000138000000
[    0.000000] Bootmem setup node 0 0000000000000000-0000000138000000
[    0.000000]   NODE_DATA [0000000000019000 - 000000000001dfff]
[    0.000000]   bootmap [000000000001e000 -  0000000000044fff] pages 27
[    0.000000] (13 early reservations) ==> bootmem [0000000000 - 0138000000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0001000000 - 0001cb4154]    TEXT DATA BSS ==> [0001000000 - 0001cb4154]
[    0.000000]   #2 [00341f8000 - 0037feffdb]          RAMDISK ==> [00341f8000 - 0037feffdb]
[    0.000000]   #3 [0001cb5000 - 0001cb529c]              BRK ==> [0001cb5000 - 0001cb529c]
[    0.000000]   #4 [00000ff790 - 0000100000]    BIOS reserved ==> [00000ff790 - 0000100000]
[    0.000000]   #5 [00000ff780 - 00000ff790]     MP-table mpf ==> [00000ff780 - 00000ff790]
[    0.000000]   #6 [000009fc00 - 00000f1160]    BIOS reserved ==> [000009fc00 - 00000f1160]
[    0.000000]   #7 [00000f1334 - 00000ff780]    BIOS reserved ==> [00000f1334 - 00000ff780]
[    0.000000]   #8 [00000f1160 - 00000f1334]     MP-table mpc ==> [00000f1160 - 00000f1334]
[    0.000000]   #9 [0000010000 - 0000012000]       TRAMPOLINE ==> [0000010000 - 0000012000]
[    0.000000]   #10 [0000012000 - 0000016000]      ACPI WAKEUP ==> [0000012000 - 0000016000]
[    0.000000]   #11 [0000016000 - 0000018000]          PGTABLE ==> [0000016000 - 0000018000]
[    0.000000]   #12 [0000018000 - 0000019000]          PGTABLE ==> [0000018000 - 0000019000]
[    0.000000]  [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880028600000-ffff88002bffffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x00138000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x000c7e90
[    0.000000]     0: 0x00100000 -> 0x00138000
[    0.000000] On node 0 totalpages: 1048095
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 105 pages reserved
[    0.000000]   DMA zone: 3822 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 800456 pages, LIFO batch:31
[    0.000000]   Normal zone: 3136 pages used for memmap
[    0.000000]   Normal zone: 226240 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[    0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 24
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000
[    0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000c7e90000 - 00000000c7ea8000
[    0.000000] PM: Registered nosave memory: 00000000c7ea8000 - 00000000c7ed0000
[    0.000000] PM: Registered nosave memory: 00000000c7ed0000 - 00000000c7f00000
[    0.000000] PM: Registered nosave memory: 00000000c7f00000 - 00000000fff00000
[    0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at c7f00000 (gap: c7f00000:38000000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 30 pages/cpu @ffff880028200000 s91544 r8192 d23144 u524288
[    0.000000] pcpu-alloc: s91544 r8192 d23144 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1030518
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.33 root=UUID=9c140ba2-1f4d-4557-abeb-e42b86ad877b ro elevator=deadline quiet splash
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Node 0: aperture @ 864a000000 size 32 MB
[    0.000000] Aperture beyond 4GB. Ignoring.
[    0.000000] Your BIOS doesn't leave a aperture memory hole
[    0.000000] Please enable the IOMMU option in the BIOS setup
[    0.000000] This costs you 64 MB of RAM
[    0.000000] Mapping aperture over 65536 KB of RAM @ 20000000
[    0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000
[    0.000000] Memory: 3924296k/5111808k available (5446k kernel code, 919428k absent, 268084k reserved, 5550k data, 876k init)
[    0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:4352 nr_irqs:440
[    0.000000] Extended CMOS year: 2000
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 41943040 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 3411.284 MHz processor.
[    0.020004] Calibrating delay loop (skipped), value calculated using timer frequency.. 6822.55 BogoMIPS (lpj=34112790)
[    0.020020] Security Framework initialized
[    0.020024] SELinux:  Disabled at boot.
[    0.020226] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.021238] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.021692] Mount-cache hash table entries: 256
[    0.021773] Initializing cgroup subsys ns
[    0.021775] Initializing cgroup subsys cpuacct
[    0.021778] Initializing cgroup subsys memory
[    0.021783] Initializing cgroup subsys devices
[    0.021784] Initializing cgroup subsys freezer
[    0.021786] Initializing cgroup subsys net_cls
[    0.021798] tseg: 0000000000
[    0.021809] CPU: Physical Processor ID: 0
[    0.021810] CPU: Processor Core ID: 0
[    0.021811] mce: CPU supports 6 MCE banks
[    0.021818] using C1E aware idle routine
[    0.021819] Performance Events: AMD PMU driver.
[    0.021822] ... version:                0
[    0.021823] ... bit width:              48
[    0.021824] ... generic registers:      4
[    0.021825] ... value mask:             0000ffffffffffff
[    0.021826] ... max period:             00007fffffffffff
[    0.021827] ... fixed-purpose events:   0
[    0.021828] ... event mask:             000000000000000f
[    0.022902] ACPI: Core revision 20091214
[    0.040005] ftrace: converting mcount calls to 0f 1f 44 00 00
[    0.040008] ftrace: allocating 21547 entries in 85 pages
[    0.044509] Setting APIC routing to flat
[    0.044801] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.148016] CPU0: AMD Phenom(tm) II X4 965 Processor stepping 03
[    0.150000] Booting Node   0, Processors  #1 #2 #3 Ok.
[    0.650008] Brought up 4 CPUs
[    0.650009] Total of 4 processors activated (27292.35 BogoMIPS).
[    0.651709] devtmpfs: initialized
[    0.651709] regulator: core version 0.5
[    0.651709] Time:  0:38:17  Date: 03/17/10
[    0.651709] NET: Registered protocol family 16
[    0.651709] node 0 link 0: io port [1000, ffffff]
[    0.651709] TOM: 00000000c8000000 aka 3200M
[    0.651709] Fam 10h mmconf [e0000000, efffffff]
[    0.651709] node 0 link 0: mmio [e0000000, efffffff] ==> none
[    0.651709] node 0 link 0: mmio [f0000000, ffffffff]
[    0.651709] node 0 link 0: mmio [a0000, bffff]
[    0.651709] node 0 link 0: mmio [c8000000, dfffffff]
[    0.651709] TOM2: 0000000138000000 aka 4992M
[    0.651709] bus: [00, 07] on node 0 link 0
[    0.651709] bus: 00 index 0 io port: [0, ffff]
[    0.651709] bus: 00 index 1 mmio: [f0000000, ffffffff]
[    0.651709] bus: 00 index 2 mmio: [a0000, bffff]
[    0.651709] bus: 00 index 3 mmio: [c8000000, dfffffff]
[    0.651709] bus: 00 index 4 mmio: [138000000, fcffffffff]
[    0.651709] ACPI: bus type pci registered
[    0.651709] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.651709] PCI: not using MMCONFIG
[    0.651709] PCI: Using configuration type 1 for base access
[    0.651709] PCI: Using configuration type 1 for extended access
[    0.651709] mtrr: your CPUs had inconsistent fixed MTRR settings
[    0.651709] mtrr: probably your BIOS does not setup all CPUs.
[    0.651709] mtrr: corrected configuration.
[    0.651709] bio: create slab <bio-0> at 0
[    0.651709] ACPI: EC: Look up EC in DSDT
[    0.653182] ACPI: Executed 3 blocks of module-level executable AML code
[    0.852106] ACPI: Interpreter enabled
[    0.852110] ACPI: (supports S0 S1 S3 S4 S5)
[    0.852126] ACPI: Using IOAPIC for interrupt routing
[    0.852168] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.855405] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.865869] ACPI Warning: Incorrect checksum in table [OEMB] - 71, should be 68 (20091214/tbutils-314)
[    0.865972] ACPI: No dock devices found.
[    0.866080] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.866095] pci_root PNP0A03:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them
[    0.866305] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.866306] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
[    0.866308] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.866309] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
[    0.866311] pci_root PNP0A03:00: host bridge window [mem 0xc7f00000-0xdfffffff] (ignored)
[    0.866312] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff] (ignored)
[    0.866331] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
[    0.866379] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[    0.866382] pci 0000:00:02.0: PME# disabled
[    0.866416] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[    0.866418] pci 0000:00:06.0: PME# disabled
[    0.866448] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[    0.866450] pci 0000:00:07.0: PME# disabled
[    0.866483] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[    0.866485] pci 0000:00:0a.0: PME# disabled
[    0.866515] pci 0000:00:0b.0: PME# supported from D0 D3hot D3cold
[    0.866517] pci 0000:00:0b.0: PME# disabled
[    0.866555] pci 0000:00:11.0: reg 10: [io  0xa000-0xa007]
[    0.866561] pci 0000:00:11.0: reg 14: [io  0x9000-0x9003]
[    0.866567] pci 0000:00:11.0: reg 18: [io  0x8000-0x8007]
[    0.866573] pci 0000:00:11.0: reg 1c: [io  0x7000-0x7003]
[    0.866579] pci 0000:00:11.0: reg 20: [io  0x6000-0x600f]
[    0.866585] pci 0000:00:11.0: reg 24: [mem 0xfb1fe400-0xfb1fe7ff]
[    0.866601] pci 0000:00:11.0: set SATA to AHCI mode
[    0.866646] pci 0000:00:12.0: reg 10: [mem 0xfb1f6000-0xfb1f6fff]
[    0.866696] pci 0000:00:12.1: reg 10: [mem 0xfb1f7000-0xfb1f7fff]
[    0.866758] pci 0000:00:12.2: reg 10: [mem 0xfb1fe800-0xfb1fe8ff]
[    0.866808] pci 0000:00:12.2: supports D1 D2
[    0.866809] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    0.866812] pci 0000:00:12.2: PME# disabled
[    0.866840] pci 0000:00:13.0: reg 10: [mem 0xfb1fc000-0xfb1fcfff]
[    0.866891] pci 0000:00:13.1: reg 10: [mem 0xfb1fd000-0xfb1fdfff]
[    0.866952] pci 0000:00:13.2: reg 10: [mem 0xfb1fec00-0xfb1fecff]
[    0.867002] pci 0000:00:13.2: supports D1 D2
[    0.867003] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    0.867007] pci 0000:00:13.2: PME# disabled
[    0.867108] pci 0000:00:14.1: reg 10: [io  0x0000-0x0007]
[    0.867114] pci 0000:00:14.1: reg 14: [io  0x0000-0x0003]
[    0.867120] pci 0000:00:14.1: reg 18: [io  0x0000-0x0007]
[    0.867126] pci 0000:00:14.1: reg 1c: [io  0x0000-0x0003]
[    0.867131] pci 0000:00:14.1: reg 20: [io  0xff00-0xff0f]
[    0.867190] pci 0000:00:14.2: reg 10: [mem 0xfb1f8000-0xfb1fbfff 64bit]
[    0.867231] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.867234] pci 0000:00:14.2: PME# disabled
[    0.867330] pci 0000:00:14.5: reg 10: [mem 0xfb1ff000-0xfb1fffff]
[    0.867465] pci 0000:07:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.867472] pci 0000:07:00.0: reg 18: [mem 0xfbfe0000-0xfbfeffff 64bit]
[    0.867476] pci 0000:07:00.0: reg 20: [io  0xe000-0xe0ff]
[    0.867483] pci 0000:07:00.0: reg 30: [mem 0xfbfc0000-0xfbfdffff pref]
[    0.867498] pci 0000:07:00.0: supports D1 D2
[    0.867521] pci 0000:07:00.1: reg 10: [mem 0xfbff0000-0xfbffffff 64bit]
[    0.867549] pci 0000:07:00.1: supports D1 D2
[    0.867597] pci 0000:00:02.0: PCI bridge to [bus 07-07]
[    0.867600] pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
[    0.867602] pci 0000:00:02.0:   bridge window [mem 0xfbf00000-0xfbffffff]
[    0.867605] pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.867635] pci 0000:06:00.0: reg 10: [io  0xd800-0xd8ff]
[    0.867651] pci 0000:06:00.0: reg 18: [mem 0xfbeff000-0xfbefffff 64bit]
[    0.867667] pci 0000:06:00.0: reg 30: [mem 0xfbec0000-0xfbedffff pref]
[    0.867702] pci 0000:06:00.0: supports D1 D2
[    0.867703] pci 0000:06:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.867707] pci 0000:06:00.0: PME# disabled
[    0.867760] pci 0000:00:06.0: PCI bridge to [bus 06-06]
[    0.867762] pci 0000:00:06.0:   bridge window [io  0xd000-0xdfff]
[    0.867764] pci 0000:00:06.0:   bridge window [mem 0xfbe00000-0xfbefffff]
[    0.867815] pci 0000:05:00.0: reg 10: [mem 0xfbdff800-0xfbdfffff 64bit]
[    0.867824] pci 0000:05:00.0: reg 18: [io  0xc800-0xc8ff]
[    0.867898] pci 0000:05:00.0: supports D2
[    0.867899] pci 0000:05:00.0: PME# supported from D2 D3hot D3cold
[    0.867904] pci 0000:05:00.0: PME# disabled
[    0.867965] pci 0000:00:07.0: PCI bridge to [bus 05-05]
[    0.867968] pci 0000:00:07.0:   bridge window [io  0xc000-0xcfff]
[    0.867970] pci 0000:00:07.0:   bridge window [mem 0xfbd00000-0xfbdfffff]
[    0.867998] pci 0000:04:00.0: reg 10: [mem 0xfbcfe000-0xfbcfffff 64bit]
[    0.868041] pci 0000:04:00.0: PME# supported from D0 D3hot
[    0.868044] pci 0000:04:00.0: PME# disabled
[    0.868095] pci 0000:00:0a.0: PCI bridge to [bus 04-04]
[    0.868099] pci 0000:00:0a.0:   bridge window [mem 0xfbc00000-0xfbcfffff]
[    0.868141] pci 0000:03:00.0: reg 10: [mem 0xfba00000-0xfbbfffff 64bit]
[    0.868224] pci 0000:03:00.0: supports D1 D2
[    0.868226] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot
[    0.868231] pci 0000:03:00.0: PME# disabled
[    0.868290] pci 0000:00:0b.0: PCI bridge to [bus 03-03]
[    0.868294] pci 0000:00:0b.0:   bridge window [mem 0xfba00000-0xfbbfffff]
[    0.868337] pci 0000:01:06.0: reg 10: [mem 0x00000000-0x00000fff]
[    0.868360] pci 0000:01:06.0: supports D1 D2
[    0.868361] pci 0000:01:06.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.868365] pci 0000:01:06.0: PME# disabled
[    0.868410] pci 0000:00:14.4: PCI bridge to [bus 01-02] (subtractive decode)
[    0.868414] pci 0000:00:14.4:   bridge window [io  0xb000-0xbfff]
[    0.868417] pci 0000:00:14.4:   bridge window [mem 0xfb200000-0xfb9fffff]
[    0.868421] pci 0000:00:14.4:   bridge window [mem 0xce000000-0xcfffffff pref]
[    0.868456] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.868591] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[    0.868636] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT]
[    0.868671] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT]
[    0.868709] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
[    0.868745] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEB._PRT]
[    0.868793] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
[    0.872379] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *7 10 11 12 14 15)
[    0.872456] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 *10 11 12 14 15)
[    0.872532] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 *11 12 14 15)
[    0.872607] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 12 14 15)
[    0.872682] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[    0.872758] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 *10 11 12 14 15)
[    0.872832] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 *11 12 14 15)
[    0.872909] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[    0.872980] vgaarb: device added: PCI:0000:07:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.872983] vgaarb: loaded
[    0.873034] SCSI subsystem initialized
[    0.873047] libata version 3.00 loaded.
[    0.873047] usbcore: registered new interface driver usbfs
[    0.873047] usbcore: registered new interface driver hub
[    0.873047] usbcore: registered new device driver usb
[    0.873047] ACPI: WMI: Mapper loaded
[    0.873047] PCI: Using ACPI for IRQ routing
[    0.873047] PCI: pci_cache_line_size set to 64 bytes
[    0.873047] pci 0000:00:00.0: address space collision: [mem 0xe0000000-0xffffffff 64bit] already in use
[    0.873047] pci 0000:00:00.0: can't reserve [mem 0xe0000000-0xffffffff 64bit]
[    0.873047] NetLabel: Initializing
[    0.873047] NetLabel:  domain hash size = 128
[    0.873047] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.873047] NetLabel:  unlabeled traffic allowed by default
[    0.873047] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.873047] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[    0.873047] Switching to clocksource tsc
[    0.873047] pnp: PnP ACPI init
[    0.873047] ACPI: bus type pnp registered
[    0.873598] pnp 00:0e: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[    0.873601] pnp 00:0e: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[    0.873603] pnp 00:0e: disabling [mem 0x000e0000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[    0.873605] pnp 00:0e: disabling [mem 0x00100000-0xc7efffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[    0.873850] pnp: PnP ACPI: found 15 devices
[    0.873851] ACPI: ACPI bus type pnp unregistered
[    0.873858] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.873859] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.873862] system 00:07: [io  0x04d0-0x04d1] has been reserved
[    0.873864] system 00:07: [io  0x040b] has been reserved
[    0.873865] system 00:07: [io  0x04d6] has been reserved
[    0.873867] system 00:07: [io  0x0c00-0x0c01] has been reserved
[    0.873868] system 00:07: [io  0x0c14] has been reserved
[    0.873869] system 00:07: [io  0x0c50-0x0c51] has been reserved
[    0.873871] system 00:07: [io  0x0c52] has been reserved
[    0.873872] system 00:07: [io  0x0c6c] has been reserved
[    0.873874] system 00:07: [io  0x0c6f] has been reserved
[    0.873875] system 00:07: [io  0x0cd0-0x0cd1] has been reserved
[    0.873876] system 00:07: [io  0x0cd2-0x0cd3] has been reserved
[    0.873878] system 00:07: [io  0x0cd4-0x0cd5] has been reserved
[    0.873879] system 00:07: [io  0x0cd6-0x0cd7] has been reserved
[    0.873881] system 00:07: [io  0x0cd8-0x0cdf] has been reserved
[    0.873882] system 00:07: [io  0x0b00-0x0b3f] has been reserved
[    0.873884] system 00:07: [io  0x0800-0x089f] has been reserved
[    0.873885] system 00:07: [io  0x0b00-0x0b0f] has been reserved
[    0.873887] system 00:07: [io  0x0b20-0x0b3f] has been reserved
[    0.873888] system 00:07: [io  0x0900-0x090f] has been reserved
[    0.873890] system 00:07: [io  0x0910-0x091f] has been reserved
[    0.873891] system 00:07: [io  0xfe00-0xfefe] has been reserved
[    0.873893] system 00:07: [mem 0xc7f00000-0xc7ffffff] could not be reserved
[    0.873895] system 00:07: [mem 0xffb80000-0xffbfffff] has been reserved
[    0.873896] system 00:07: [mem 0xfec10000-0xfec1001f] has been reserved
[    0.873900] system 00:0c: [io  0x0230-0x023f] has been reserved
[    0.873901] system 00:0c: [io  0x0290-0x029f] has been reserved
[    0.873903] system 00:0c: [io  0x0f40-0x0f4f] has been reserved
[    0.873904] system 00:0c: [io  0x0a30-0x0a3f] has been reserved
[    0.873907] system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
[    0.873911] system 00:0e: [mem 0xfec00000-0xffffffff] could not be reserved
[    0.878547] pci 0000:00:02.0: PCI bridge to [bus 07-07]
[    0.878549] pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
[    0.878551] pci 0000:00:02.0:   bridge window [mem 0xfbf00000-0xfbffffff]
[    0.878553] pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.878556] pci 0000:00:06.0: PCI bridge to [bus 06-06]
[    0.878558] pci 0000:00:06.0:   bridge window [io  0xd000-0xdfff]
[    0.878560] pci 0000:00:06.0:   bridge window [mem 0xfbe00000-0xfbefffff]
[    0.878562] pci 0000:00:06.0:   bridge window [mem pref disabled]
[    0.878565] pci 0000:00:07.0: PCI bridge to [bus 05-05]
[    0.878566] pci 0000:00:07.0:   bridge window [io  0xc000-0xcfff]
[    0.878569] pci 0000:00:07.0:   bridge window [mem 0xfbd00000-0xfbdfffff]
[    0.878570] pci 0000:00:07.0:   bridge window [mem pref disabled]
[    0.878573] pci 0000:00:0a.0: PCI bridge to [bus 04-04]
[    0.878574] pci 0000:00:0a.0:   bridge window [io  disabled]
[    0.878576] pci 0000:00:0a.0:   bridge window [mem 0xfbc00000-0xfbcfffff]
[    0.878578] pci 0000:00:0a.0:   bridge window [mem pref disabled]
[    0.878581] pci 0000:00:0b.0: PCI bridge to [bus 03-03]
[    0.878582] pci 0000:00:0b.0:   bridge window [io  disabled]
[    0.878584] pci 0000:00:0b.0:   bridge window [mem 0xfba00000-0xfbbfffff]
[    0.878586] pci 0000:00:0b.0:   bridge window [mem pref disabled]
[    0.878590] pci 0000:01:06.0: BAR 15: assigned [mem 0xc8000000-0xcbffffff pref]
[    0.878592] pci 0000:01:06.0: BAR 16: assigned [mem 0xf0000000-0xf3ffffff]
[    0.878594] pci 0000:01:06.0: BAR 0: assigned [mem 0xfb200000-0xfb200fff]
[    0.878598] pci 0000:01:06.0: BAR 0: set to [mem 0xfb200000-0xfb200fff] (PCI address [0xfb200000-0xfb200fff]
[    0.878600] pci 0000:01:06.0: BAR 13: assigned [io  0xb000-0xb0ff]
[    0.878602] pci 0000:01:06.0: BAR 14: assigned [io  0xb400-0xb4ff]
[    0.878603] pci 0000:01:06.0: CardBus bridge to [bus 02-02]
[    0.878604] pci 0000:01:06.0:   bridge window [io  0xb000-0xb0ff]
[    0.878608] pci 0000:01:06.0:   bridge window [io  0xb400-0xb4ff]
[    0.878613] pci 0000:01:06.0:   bridge window [mem 0xc8000000-0xcbffffff pref]
[    0.878617] pci 0000:01:06.0:   bridge window [mem 0xf0000000-0xf3ffffff]
[    0.878621] pci 0000:00:14.4: PCI bridge to [bus 01-02]
[    0.878623] pci 0000:00:14.4:   bridge window [io  0xb000-0xbfff]
[    0.878628] pci 0000:00:14.4:   bridge window [mem 0xfb200000-0xfb9fffff]
[    0.878631] pci 0000:00:14.4:   bridge window [mem 0xce000000-0xcfffffff pref]
[    0.878641]   alloc irq_desc for 18 on node 0
[    0.878642]   alloc kstat_irqs on node 0
[    0.878645] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.878647] pci 0000:00:02.0: setting latency timer to 64
[    0.878651] pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.878654] pci 0000:00:06.0: setting latency timer to 64
[    0.878657]   alloc irq_desc for 19 on node 0
[    0.878658]   alloc kstat_irqs on node 0
[    0.878660] pci 0000:00:07.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    0.878662] pci 0000:00:07.0: setting latency timer to 64
[    0.878666] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.878668] pci 0000:00:0a.0: setting latency timer to 64
[    0.878671] pci 0000:00:0b.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    0.878673] pci 0000:00:0b.0: setting latency timer to 64
[    0.878686]   alloc irq_desc for 21 on node 0
[    0.878687]   alloc kstat_irqs on node 0
[    0.878689] pci 0000:01:06.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[    0.878694] pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
[    0.878695] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff]
[    0.878696] pci_bus 0000:07: resource 0 [io  0xe000-0xefff]
[    0.878698] pci_bus 0000:07: resource 1 [mem 0xfbf00000-0xfbffffff]
[    0.878699] pci_bus 0000:07: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.878701] pci_bus 0000:06: resource 0 [io  0xd000-0xdfff]
[    0.878702] pci_bus 0000:06: resource 1 [mem 0xfbe00000-0xfbefffff]
[    0.878704] pci_bus 0000:05: resource 0 [io  0xc000-0xcfff]
[    0.878705] pci_bus 0000:05: resource 1 [mem 0xfbd00000-0xfbdfffff]
[    0.878707] pci_bus 0000:04: resource 1 [mem 0xfbc00000-0xfbcfffff]
[    0.878708] pci_bus 0000:03: resource 1 [mem 0xfba00000-0xfbbfffff]
[    0.878709] pci_bus 0000:01: resource 0 [io  0xb000-0xbfff]
[    0.878711] pci_bus 0000:01: resource 1 [mem 0xfb200000-0xfb9fffff]
[    0.878712] pci_bus 0000:01: resource 2 [mem 0xce000000-0xcfffffff pref]
[    0.878714] pci_bus 0000:01: resource 3 [io  0x0000-0xffff]
[    0.878715] pci_bus 0000:01: resource 4 [mem 0x00000000-0xffffffffffffffff]
[    0.878717] pci_bus 0000:02: resource 0 [io  0xb000-0xb0ff]
[    0.878718] pci_bus 0000:02: resource 1 [io  0xb400-0xb4ff]
[    0.878719] pci_bus 0000:02: resource 2 [mem 0xc8000000-0xcbffffff pref]
[    0.878721] pci_bus 0000:02: resource 3 [mem 0xf0000000-0xf3ffffff]
[    0.878734] NET: Registered protocol family 2
[    0.878809] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.879395] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.881248] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.881479] TCP: Hash tables configured (established 524288 bind 65536)
[    0.881481] TCP reno registered
[    0.881486] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.881510] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.881582] NET: Registered protocol family 1
[    1.034461] pci 0000:07:00.0: Boot video device
[    1.034502] PCI: CLS 64 bytes, default 64
[    1.034536] Trying to unpack rootfs image as initramfs...
[    1.955743] Freeing initrd memory: 63455k freed
[    1.970064] PCI-DMA: Disabling AGP.
[    1.970152] PCI-DMA: aperture base @ 20000000 size 65536 KB
[    1.970153] PCI-DMA: using GART IOMMU.
[    1.970156] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    1.973069] Scanning for low memory corruption every 60 seconds
[    1.973145] audit: initializing netlink socket (disabled)
[    1.973153] type=2000 audit(1268786297.970:1): initialized
[    1.980564] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.981373] VFS: Disk quotas dquot_6.5.2
[    1.981396] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.981706] fuse init (API version 7.13)
[    1.981747] msgmni has been set to 7917
[    1.981913] alg: No test for stdrng (krng)
[    1.981921] io scheduler noop registered
[    1.981922] io scheduler deadline registered (default)
[    1.981955] io scheduler cfq registered
[    1.982037] pcieport 0000:00:02.0: setting latency timer to 64
[    1.982058]   alloc irq_desc for 24 on node 0
[    1.982059]   alloc kstat_irqs on node 0
[    1.982065] pcieport 0000:00:02.0: irq 24 for MSI/MSI-X
[    1.982134] pcieport 0000:00:06.0: setting latency timer to 64
[    1.982151]   alloc irq_desc for 25 on node 0
[    1.982152]   alloc kstat_irqs on node 0
[    1.982155] pcieport 0000:00:06.0: irq 25 for MSI/MSI-X
[    1.982206] pcieport 0000:00:07.0: setting latency timer to 64
[    1.982222]   alloc irq_desc for 26 on node 0
[    1.982223]   alloc kstat_irqs on node 0
[    1.982226] pcieport 0000:00:07.0: irq 26 for MSI/MSI-X
[    1.982277] pcieport 0000:00:0a.0: setting latency timer to 64
[    1.982293]   alloc irq_desc for 27 on node 0
[    1.982294]   alloc kstat_irqs on node 0
[    1.982297] pcieport 0000:00:0a.0: irq 27 for MSI/MSI-X
[    1.982347] pcieport 0000:00:0b.0: setting latency timer to 64
[    1.982364]   alloc irq_desc for 28 on node 0
[    1.982365]   alloc kstat_irqs on node 0
[    1.982368] pcieport 0000:00:0b.0: irq 28 for MSI/MSI-X
[    1.982417] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.982430] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.982497] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    1.982508] ACPI: Power Button [PWRB]
[    1.982529] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    1.982530] ACPI: Power Button [PWRF]
[    1.986693] Linux agpgart interface v0.103
[    1.986695] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.986793] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.986998] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.987509] brd: module loaded
[    1.987728] loop: module loaded
[    1.987775] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[    1.987848] ahci 0000:00:11.0: version 3.0
[    1.987855]   alloc irq_desc for 22 on node 0
[    1.987856]   alloc kstat_irqs on node 0
[    1.987859] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    1.987901]   alloc irq_desc for 29 on node 0
[    1.987902]   alloc kstat_irqs on node 0
[    1.987910] ahci 0000:00:11.0: irq 29 for MSI/MSI-X
[    1.987978] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[    1.987981] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc sxs 
[    1.988161] scsi0 : ahci
[    1.988211] scsi1 : ahci
[    1.988239] scsi2 : ahci
[    1.988266] scsi3 : ahci
[    1.988331] ata1: SATA max UDMA/133 abar m1024@0xfb1fe400 port 0xfb1fe500 irq 29
[    1.988334] ata2: SATA max UDMA/133 abar m1024@0xfb1fe400 port 0xfb1fe580 irq 29
[    1.988336] ata3: SATA max UDMA/133 abar m1024@0xfb1fe400 port 0xfb1fe600 irq 29
[    1.988339] ata4: SATA max UDMA/133 abar m1024@0xfb1fe400 port 0xfb1fe680 irq 29
[    1.988522]   alloc irq_desc for 16 on node 0
[    1.988524]   alloc kstat_irqs on node 0
[    1.988526] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.988543] pata_atiixp 0000:00:14.1: setting latency timer to 64
[    1.988589] scsi4 : pata_atiixp
[    1.988616] scsi5 : pata_atiixp
[    1.989431] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[    1.989433] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[    1.989799] Fixed MDIO Bus: probed
[    1.989815] PPP generic driver version 2.4.2
[    1.989844] tun: Universal TUN/TAP device driver, 1.6
[    1.989845] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.989887] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.989916]   alloc irq_desc for 17 on node 0
[    1.989917]   alloc kstat_irqs on node 0
[    1.989919] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.989932] ehci_hcd 0000:00:12.2: EHCI Host Controller
[    1.989958] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[    1.989983] ehci_hcd 0000:00:12.2: debug port 1
[    1.989998] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfb1fe800
[    2.000024] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    2.000090] hub 1-0:1.0: USB hub found
[    2.000093] hub 1-0:1.0: 6 ports detected
[    2.000176] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    2.000187] ehci_hcd 0000:00:13.2: EHCI Host Controller
[    2.000204] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[    2.000228] ehci_hcd 0000:00:13.2: debug port 1
[    2.000244] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfb1fec00
[    2.030017] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    2.030080] hub 2-0:1.0: USB hub found
[    2.030082] hub 2-0:1.0: 6 ports detected
[    2.030128] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.030169] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    2.030181] ohci_hcd 0000:00:12.0: OHCI Host Controller
[    2.030198] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[    2.030218] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfb1f6000
[    2.084093] hub 3-0:1.0: USB hub found
[    2.084098] hub 3-0:1.0: 3 ports detected
[    2.084167] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    2.084178] ohci_hcd 0000:00:12.1: OHCI Host Controller
[    2.084195] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
[    2.084208] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfb1f7000
[    2.144085] hub 4-0:1.0: USB hub found
[    2.144091] hub 4-0:1.0: 3 ports detected
[    2.144161] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    2.144174] ohci_hcd 0000:00:13.0: OHCI Host Controller
[    2.144193] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[    2.144213] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfb1fc000
[    2.204092] hub 5-0:1.0: USB hub found
[    2.204097] hub 5-0:1.0: 3 ports detected
[    2.204166] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    2.204176] ohci_hcd 0000:00:13.1: OHCI Host Controller
[    2.204194] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
[    2.204207] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfb1fd000
[    2.264087] hub 6-0:1.0: USB hub found
[    2.264092] hub 6-0:1.0: 3 ports detected
[    2.264162] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    2.264173] ohci_hcd 0000:00:14.5: OHCI Host Controller
[    2.264190] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
[    2.264204] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfb1ff000
[    2.324091] hub 7-0:1.0: USB hub found
[    2.324096] hub 7-0:1.0: 2 ports detected
[    2.324139] uhci_hcd: USB Universal Host Controller Interface driver
[    2.324193] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    2.324535] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.324538] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.324587] mice: PS/2 mouse device common for all mice
[    2.324640] rtc_cmos 00:02: RTC can wake from S4
[    2.324658] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    2.324679] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    2.324727] device-mapper: uevent: version 1.0.3
[    2.324791] device-mapper: ioctl: 4.16.0-ioctl (2009-11-05) initialised: dm-devel@redhat.com
[    2.324874] device-mapper: multipath: version 1.1.1 loaded
[    2.324876] device-mapper: multipath round-robin: version 1.0.0 loaded
[    2.325036] cpuidle: using governor ladder
[    2.325037] cpuidle: using governor menu
[    2.325174] TCP cubic registered
[    2.325247] NET: Registered protocol family 10
[    2.325447] lo: Disabled Privacy Extensions
[    2.325557] NET: Registered protocol family 17
[    2.325593] powernow-k8: Found 1 AMD Phenom(tm) II X4 965 Processor processors (4 cpu cores) (version 2.20.00)
[    2.325619] powernow-k8:    0 : pstate 0 (3400 MHz)
[    2.325620] powernow-k8:    1 : pstate 1 (2700 MHz)
[    2.325621] powernow-k8:    2 : pstate 2 (2200 MHz)
[    2.325622] powernow-k8:    3 : pstate 3 (800 MHz)
[    2.326127] PM: Resume from disk failed.
[    2.326133] registered taskstats version 1
[    2.326388]   Magic number: 2:834:607
[    2.326442] rtc_cmos 00:02: setting system clock to 2010-03-17 00:38:18 UTC (1268786298)
[    2.326444] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    2.326444] EDD information not available.
[    2.330561] ata1: SATA link down (SStatus 0 SControl 300)
[    2.330587] ata4: SATA link down (SStatus 0 SControl 300)
[    2.330628] ata2: SATA link down (SStatus 0 SControl 300)
[    2.353334] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    2.460029] usb 2-6: new high speed USB device using ehci_hcd and address 3
[    2.510036] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.510198] ata3.00: ATA-7: OCZ-VERTEX, 1.30, max UDMA/133
[    2.510200] ata3.00: 62533296 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[    2.510377] ata3.00: configured for UDMA/133
[    2.531332] scsi 2:0:0:0: Direct-Access     ATA      OCZ-VERTEX       1.30 PQ: 0 ANSI: 5
[    2.531410] sd 2:0:0:0: Attached scsi generic sg0 type 0
[    2.531418] sd 2:0:0:0: [sda] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB)
[    2.531461] sd 2:0:0:0: [sda] Write Protect is off
[    2.531462] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.531472] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.531546]  sda: sda1
[    2.531813] sd 2:0:0:0: [sda] Attached SCSI disk
[    2.710341] ata6.00: ATAPI: HL-DT-ST DVDRAM GH22LS50, TL01, max UDMA/100
[    2.750349] ata6.00: configured for UDMA/100
[    2.758796] scsi 5:0:0:0: CD-ROM            HL-DT-ST DVDRAM GH22LS50  TL01 PQ: 0 ANSI: 5
[    2.760025] usb 6-2: new full speed USB device using ohci_hcd and address 2
[    2.779848] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.779850] Uniform CD-ROM driver Revision: 3.20
[    2.779893] sr 5:0:0:0: Attached scsi CD-ROM sr0
[    2.779918] sr 5:0:0:0: Attached scsi generic sg1 type 5
[    2.779940] Freeing unused kernel memory: 876k freed
[    2.780105] Write protecting the kernel read-only data: 10240k
[    2.780205] Freeing unused kernel memory: 676k freed
[    2.780426] Freeing unused kernel memory: 1796k freed
[    2.788719] udev: starting version 151
[    2.807420] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    2.807436] r8169 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    2.807487] r8169 0000:06:00.0: setting latency timer to 64
[    2.807530]   alloc irq_desc for 30 on node 0
[    2.807531]   alloc kstat_irqs on node 0
[    2.807542] r8169 0000:06:00.0: irq 30 for MSI/MSI-X
[    2.807799] eth0: RTL8168b/8111b at 0xffffc90011172000, 00:26:18:78:3a:5d, XID 18000000 IRQ 30
[    2.823880] Initializing USB Mass Storage driver...
[    2.824975] Floppy drive(s): fd0 is 1.44M
[    2.825221] scsi6 : usb-storage 2-6:1.0
[    2.825294] usbcore: registered new interface driver usb-storage
[    2.825295] USB Mass Storage support registered.
[    2.826387] EXT4-fs (sda1): mounted filesystem without journal
[    2.827749] ohci1394 0000:05:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    2.827756] ohci1394 0000:05:00.0: setting latency timer to 64
[    2.846356] FDC 0 is a post-1991 82077
[    2.882059] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19]  MMIO=[fbdff800-fbdfffff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[    3.013505] udev: starting version 151
[    3.084368] lp: driver loaded but no devices found
[    3.120253] xhci_hcd 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    3.120287] xhci_hcd 0000:04:00.0: setting latency timer to 64
[    3.120289] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    3.120341] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 8
[    3.120441] xhci_hcd 0000:04:00.0: irq 18, io mem 0xfbcfe000
[    3.120467] usb usb8: config 1 interface 0 altsetting 0 endpoint 0x81 has no SuperSpeed companion descriptor
[    3.120518] xHCI xhci_add_endpoint called for root hub
[    3.120519] xHCI xhci_check_bandwidth called for root hub
[    3.120538] hub 8-0:1.0: USB hub found
[    3.120541] hub 8-0:1.0: 4 ports detected
[    3.134916] EDAC MC: Ver: 2.1.0 Mar 14 2010
[    3.137294] ACPI: I/O resource piix4_smbus [0xb00-0xb07] conflicts with ACPI region SOR1 [0xb00-0xb0f]
[    3.137337] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.170179] EDAC amd64_edac:  Ver: 3.3.0 Mar 14 2010
[    3.170227] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3).
[    3.170232] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[    3.170233]  Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[    3.170234]  (Note that use of the override may cause unknown side effects.)
[    3.170243] amd64_edac: probe of 0000:00:18.2 failed with error -22
[    3.276945] [drm] Initialized drm 1.1.0 20060810
[    3.328879] Bluetooth: Core ver 2.15
[    3.328975] NET: Registered protocol family 31
[    3.328976] Bluetooth: HCI device and connection manager initialized
[    3.328978] Bluetooth: HCI socket layer initialized
[    3.357480] yenta_cardbus 0000:01:06.0: CardBus bridge found [0000:0000]
[    3.366203] Bluetooth: Generic Bluetooth USB driver ver 0.6
[    3.366271] usbcore: registered new interface driver btusb
[    3.422573] Bluetooth: L2CAP ver 2.14
[    3.422575] Bluetooth: L2CAP socket layer initialized
[    3.490670] yenta_cardbus 0000:01:06.0: ISA IRQ mask 0x0000, PCI irq 21
[    3.490673] yenta_cardbus 0000:01:06.0: Socket status: 30000820
[    3.490678] yenta_cardbus 0000:01:06.0: pcmcia: parent PCI bridge I/O window: 0xb000 - 0xbfff
[    3.490681] yenta_cardbus 0000:01:06.0: pcmcia: parent PCI bridge Memory window: 0xfb200000 - 0xfb9fffff
[    3.490683] yenta_cardbus 0000:01:06.0: pcmcia: parent PCI bridge Memory window: 0xce000000 - 0xcfffffff
[    3.507140] r8169: eth0: link down
[    3.507147] r8169: eth0: link down
[    3.507450] ADDRCONF(NETDEV_UP): eth0: link is not ready
[    3.625607] [drm] radeon defaulting to kernel modesetting.
[    3.625609] [drm] radeon kernel modesetting enabled.
[    3.625697] radeon 0000:07:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    3.625701] radeon 0000:07:00.0: setting latency timer to 64
[    3.626801] [drm] radeon: Initializing kernel modesetting.
[    3.626943] [drm] register mmio base: 0xFBFE0000
[    3.626945] [drm] register mmio size: 65536
[    3.627469] ATOM BIOS: RV570
[    3.627682] [drm] GPU reset succeed (RBBM_STATUS=0x10000140)
[    3.627693] [drm] Generation 2 PCI interface, using max accessible memory
[    3.627695] [drm] radeon: VRAM 256M
[    3.627696] [drm] radeon: VRAM from 0x00000000 to 0x0FFFFFFF
[    3.627697] [drm] radeon: GTT 512M
[    3.627698] [drm] radeon: GTT from 0x20000000 to 0x3FFFFFFF
[    3.627731]   alloc irq_desc for 31 on node 0
[    3.627732]   alloc kstat_irqs on node 0
[    3.627740] radeon 0000:07:00.0: irq 31 for MSI/MSI-X
[    3.627744] [drm] radeon: using MSI.
[    3.627762] [drm] radeon: irq initialized.
[    3.629858] [drm] Detected VRAM RAM=256M, BAR=256M
[    3.629861] [drm] RAM width 256bits DDR
[    3.630022] [TTM] Zone  kernel: Available graphics memory: 2028526 kiB.
[    3.630033] [drm] radeon: 256M of VRAM memory ready
[    3.630034] [drm] radeon: 512M of GTT memory ready.
[    3.630045] [drm] GART: num cpu pages 131072, num gpu pages 131072
[    3.631596] [drm] radeon: 3 quad pipes, 1 z pipes initialized.
[    3.631637] [drm] PCIE GART of 512M enabled (table at 0x00040000).
[    3.631649] [drm] radeon: cp idle (0x10000C03)
[    3.631682] [drm] Loading R500 Microcode
[    3.631684] platform radeon_cp.0: firmware: requesting radeon/R520_cp.bin
[    3.642978] [drm] radeon: ring at 0x0000000020000000
[    3.642998] [drm] ring test succeeded in 2 usecs
[    3.643055] [drm] radeon: ib pool ready.
[    3.643097] [drm] ib test succeeded in 0 usecs
[    3.643158] [drm] Default TV standard: PAL
[    3.643192] [drm] Radeon Display Connectors
[    3.643193] [drm] Connector 0:
[    3.643193] [drm]   DVI-I
[    3.643194] [drm]   HPD2
[    3.643196] [drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[    3.643197] [drm]   Encoders:
[    3.643197] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[    3.643198] [drm]     DFP3: INTERNAL_LVTM1
[    3.643199] [drm] Connector 1:
[    3.643200] [drm]   S-video
[    3.643201] [drm]   Encoders:
[    3.643201] [drm]     TV1: INTERNAL_KLDSCP_DAC2
[    3.643202] [drm] Connector 2:
[    3.643203] [drm]   DVI-I
[    3.643203] [drm]   HPD1
[    3.643205] [drm]   DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[    3.643206] [drm]   Encoders:
[    3.643206] [drm]     CRT2: INTERNAL_KLDSCP_DAC2
[    3.643207] [drm]     DFP1: INTERNAL_KLDSCP_TMDS1
[    3.647207] ppdev: user-space parallel port driver
[    3.682137] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    3.682138] Bluetooth: BNEP filters: protocol multicast
[    3.758372] Bridge firewalling registered
[    3.785698] Linux video capture interface: v2.00
[    3.786553] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
[    3.791000] Bluetooth: SCO (Voice Link) ver 0.6
[    3.791001] Bluetooth: SCO socket layer initialized
[    3.813373] [drm] fb mappable at 0xD00C0000
[    3.813376] [drm] vram apper at 0xD0000000
[    3.813377] [drm] size 8294400
[    3.813377] [drm] fb depth is 24
[    3.813378] [drm]    pitch is 7680
[    3.813450] fb0: radeondrmfb frame buffer device
[    3.813451] registered panic notifier
[    3.813454] [drm] Initialized radeon 2.0.0 20080528 for 0000:07:00.0 on minor 0
[    3.878843] cx23885 driver version 0.0.2 loaded
[    3.879293] cx23885 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    3.879383] CORE cx23885[0]: subsystem: 0070:8010, board: Hauppauge WinTV-HVR1400 [card=9,autodetected]
[    3.947566] Console: switching to colour frame buffer device 240x67
[    4.021502] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    4.049325] tveeprom 2-0050: Hauppauge model 80019, rev B2F1, serial# 4943475
[    4.049327] tveeprom 2-0050: MAC address is 00-0D-FE-4B-6E-73
[    4.049328] tveeprom 2-0050: tuner model is Xceive XC3028L (idx 151, type 4)
[    4.049330] tveeprom 2-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xf4)
[    4.049332] tveeprom 2-0050: audio processor is CX23885 (idx 39)
[    4.049334] tveeprom 2-0050: decoder processor is CX23885 (idx 33)
[    4.049335] tveeprom 2-0050: has radio
[    4.049336] cx23885[0]: hauppauge eeprom: model=80019
[    4.049337] cx23885_dvb_register() allocating 1 frontend(s)
[    4.049355] cx23885[0]: cx23885 based dvb card
[    4.069380] Bluetooth: RFCOMM TTY layer initialized
[    4.069382] Bluetooth: RFCOMM socket layer initialized
[    4.069383] Bluetooth: RFCOMM ver 1.11
[    4.150983] xc2028 3-0064: creating new instance
[    4.150985] xc2028 3-0064: type set to XCeive xc2028/xc3028 tuner
[    4.150988] DVB: registering new adapter (cx23885[0])
[    4.150990] DVB: registering adapter 0 frontend 0 (DiBcom 7000PC)...
[    4.151155] cx23885_dev_checkrevision() Hardware revision = 0xb0
[    4.151161] cx23885[0]/0: found at 0000:03:00.0, rev: 2, irq: 19, latency: 0, mmio: 0xfba00000
[    4.151167] cx23885 0000:03:00.0: setting latency timer to 64
[    4.151171] IRQ 19/cx23885[0]: IRQF_DISABLED is not guaranteed on shared IRQs
[    4.152514] pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0
[    4.152559] pci 0000:02:00.0: reg 10: [mem 0x00000000-0x0000ffff]
[    4.152655] pci 0000:02:00.0: BAR 0: assigned [mem 0xf0000000-0xf000ffff]
[    4.152662] pci 0000:02:00.0: BAR 0: set to [mem 0xf0000000-0xf000ffff] (PCI address [0xf0000000-0xf000ffff]
[    4.165738] hda_codec: ALC1200: BIOS auto-probing.
[    4.167274] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input5
[    4.225341] cfg80211: Calling CRDA to update world regulatory domain
[    4.234778] cfg80211: World regulatory domain updated:
[    4.234780]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    4.234782]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    4.234784]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    4.234785]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    4.234786]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    4.234788]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    4.331348] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[001e8c0001f9746f]
[    4.414400] ath5k 0000:02:00.0: enabling device (0000 -> 0002)
[    4.414410] ath5k 0000:02:00.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[    4.414494] ath5k 0000:02:00.0: registered as 'phy0'
[    4.948687] r8169: eth0: link up
[    4.948979] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    5.006307] ath: EEPROM regdomain: 0x80d0
[    5.006308] ath: EEPROM indicates we should expect a country code
[    5.006309] ath: doing EEPROM country->regdmn map search
[    5.006310] ath: country maps to regdmn code: 0x37
[    5.006311] ath: Country alpha2 being used: DK
[    5.006312] ath: Regpair used: 0x37
[    5.010364] phy0: Selected rate control algorithm 'minstrel'
[    5.010663] ath5k phy0: Atheros AR2414 chip found (MAC: 0x79, PHY: 0x45)
[    5.010673] cfg80211: Calling CRDA for country: DK
[    5.011634] cfg80211: Regulatory domain changed to country: DK
[    5.011636]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    5.011638]     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[    5.011639]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[    5.011640]     (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[    5.011642]     (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[    5.056158] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[    6.118627] cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0
[    7.820717] scsi 6:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
[    7.821337] scsi 6:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
[    7.821837] scsi 6:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
[    7.822461] scsi 6:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
[    7.822737] sd 6:0:0:0: Attached scsi generic sg2 type 0
[    7.822796] sd 6:0:0:1: Attached scsi generic sg3 type 0
[    7.822855] sd 6:0:0:2: Attached scsi generic sg4 type 0
[    7.825780] sd 6:0:0:3: Attached scsi generic sg5 type 0
[    8.375881] sd 6:0:0:3: [sde] Attached SCSI removable disk
[    8.376453] sd 6:0:0:1: [sdc] Attached SCSI removable disk
[    8.377076] sd 6:0:0:2: [sdd] Attached SCSI removable disk
[    8.377452] sd 6:0:0:0: [sdb] 7744512 512-byte logical blocks: (3.96 GB/3.69 GiB)
[    8.380078] sd 6:0:0:0: [sdb] Write Protect is off
[    8.380080] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00
[    8.380081] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[    8.387332] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[    8.387335]  sdb: sdb1
[    8.409957] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[    8.409960] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[   11.510028] usb 8-4: new high speed USB device using xhci_hcd and address 0
[   11.538289] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[   11.539037] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[   11.539661] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[   11.540411] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[   11.541913] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[   11.542663] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[   11.543128] scsi7 : usb-storage 8-4:1.0
[   16.580439] scsi 7:0:0:0: Direct-Access     WDC WD16 00BEVS-08VAT2    1A14 PQ: 0 ANSI: 2 CCS
[   16.580660] sd 7:0:0:0: Attached scsi generic sg6 type 0
[   16.580980] sd 7:0:0:0: [sdf] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[   16.582134] sd 7:0:0:0: [sdf] Write Protect is off
[   16.582136] sd 7:0:0:0: [sdf] Mode Sense: 00 38 00 00
[   16.582138] sd 7:0:0:0: [sdf] Assuming drive cache: write through
[   16.582923] sd 7:0:0:0: [sdf] Assuming drive cache: write through
[   16.582925]  sdf: sdf1 sdf2
[   16.621658] sd 7:0:0:0: [sdf] Assuming drive cache: write through
[   16.621661] sd 7:0:0:0: [sdf] Attached SCSI disk
[   16.714236] xhci_hcd 0000:04:00.0: WARN: Stalled endpoint
[   16.715152] xhci_hcd 0000:04:00.0: WARN: Stalled endpoint
[   25.179260] FAT: Filesystem error (dev sdb1)
[   25.179263]     invalid access to FAT (entry 0xb7bbd5af)
[   25.179265]     File system has been set read-only
[   25.179371] FAT: Filesystem error (dev sdb1)
[   25.179372]     invalid access to FAT (entry 0xb7bbd5af)
[   25.179457] FAT: Filesystem error (dev sdb1)
[   25.179458]     invalid access to FAT (entry 0xb7bbd5af)
[   25.179539] FAT: Filesystem error (dev sdb1)
[   25.179540]     invalid access to FAT (entry 0xb7bbd5af)
[   25.179619] FAT: Filesystem error (dev sdb1)
[   25.179620]     invalid access to FAT (entry 0xb7bbd5af)
[   25.179700] FAT: Filesystem error (dev sdb1)
[   25.179701]     invalid access to FAT (entry 0xb7bbd5af)
[   25.179780] FAT: Filesystem error (dev sdb1)
[   25.179781]     invalid access to FAT (entry 0xb7bbd5af)
[   25.179859] FAT: Filesystem error (dev sdb1)
[   25.179860]     invalid access to FAT (entry 0xb7bbd5af)
[   25.179939] FAT: Filesystem error (dev sdb1)
[   25.179940]     invalid access to FAT (entry 0xb7bbd5af)
[   25.180038] FAT: Filesystem error (dev sdb1)
[   25.180038]     invalid access to FAT (entry 0xb7bbd5af)
[   25.180116] FAT: Filesystem error (dev sdb1)
[   25.180116]     invalid access to FAT (entry 0xb7bbd5af)
[   25.180186] FAT: Filesystem error (dev sdb1)
[   25.180186]     invalid access to FAT (entry 0xb7bbd5af)
[   25.180255] FAT: Filesystem error (dev sdb1)
[   25.180256]     invalid access to FAT (entry 0xb7bbd5af)
[   25.180324] FAT: Filesystem error (dev sdb1)
[   25.180325]     invalid access to FAT (entry 0xb7bbd5af)
[   25.180394] FAT: Filesystem error (dev sdb1)
[   25.180394]     invalid access to FAT (entry 0xb7bbd5af)
[   25.183937] EXT4-fs (sdf2): warning: maximal mount count reached, running e2fsck is recommended
[   25.184793] EXT4-fs (sdf2): mounted filesystem with ordered data mode
[   25.185597] FAT: Filesystem error (dev sdb1)
[   25.185599]     invalid access to FAT (entry 0xb7bbd5af)
[   25.185696] FAT: Filesystem error (dev sdb1)
[   25.185698]     invalid access to FAT (entry 0xb7bbd5af)
[   25.186864] FAT: Filesystem error (dev sdb1)
[   25.186865]     invalid access to FAT (entry 0xb7bbd5af)
[   25.186955] FAT: Filesystem error (dev sdb1)
[   25.186956]     invalid access to FAT (entry 0xb7bbd5af)
[   25.187041] FAT: Filesystem error (dev sdb1)
[   25.187042]     invalid access to FAT (entry 0xb7bbd5af)
[   25.187124] FAT: Filesystem error (dev sdb1)
[   25.187125]     invalid access to FAT (entry 0xb7bbd5af)
[   25.187205] FAT: Filesystem error (dev sdb1)
[   25.187206]     invalid access to FAT (entry 0xb7bbd5af)
[   25.187285] FAT: Filesystem error (dev sdb1)
[   25.187286]     invalid access to FAT (entry 0xb7bbd5af)
[   25.187365] FAT: Filesystem error (dev sdb1)
[   25.187366]     invalid access to FAT (entry 0xb7bbd5af)
[   25.187444] FAT: Filesystem error (dev sdb1)
[   25.187445]     invalid access to FAT (entry 0xb7bbd5af)
[   25.187524] FAT: Filesystem error (dev sdb1)
[   25.187525]     invalid access to FAT (entry 0xb7bbd5af)
[   25.187601] FAT: Filesystem error (dev sdb1)
[   25.187602]     invalid access to FAT (entry 0xb7bbd5af)
[   25.187677] FAT: Filesystem error (dev sdb1)
[   25.187678]     invalid access to FAT (entry 0xb7bbd5af)
[   25.187747] FAT: Filesystem error (dev sdb1)
[   25.187748]     invalid access to FAT (entry 0xb7bbd5af)
[   25.187816] FAT: Filesystem error (dev sdb1)
[   25.187817]     invalid access to FAT (entry 0xb7bbd5af)
[   25.187885] FAT: Filesystem error (dev sdb1)
[   25.187886]     invalid access to FAT (entry 0xb7bbd5af)
[   25.187954] FAT: Filesystem error (dev sdb1)
[   25.187955]     invalid access to FAT (entry 0xb7bbd5af)
[   25.188128] FAT: Filesystem error (dev sdb1)
[   25.188129]     invalid access to FAT (entry 0xb7bbd5af)
[   25.188341] FAT: Filesystem error (dev sdb1)
[   25.188342]     invalid access to FAT (entry 0xb7bbd5af)
[   25.332786] FAT: Filesystem error (dev sdb1)
[   25.332789]     invalid access to FAT (entry 0xb7bbd5af)
[   25.333228] FAT: Filesystem error (dev sdb1)
[   25.333231]     invalid access to FAT (entry 0xb7bbd5af)
[   25.333271] FAT: Filesystem error (dev sdb1)
[   25.333272]     invalid access to FAT (entry 0xba29fcb1)
[   25.336563] FAT: Filesystem error (dev sdb1)
[   25.336565]     invalid access to FAT (entry 0xba29fcb1)
[   84.276882] cx23885 0000:03:00.0: firmware: requesting xc3028L-v36.fw
[   84.280859] xc2028 3-0064: Loading 81 firmware images from xc3028L-v36.fw, type: xc2028 firmware, ver 3.6
[   84.481088] xc2028 3-0064: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
[   85.690168] xc2028 3-0064: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000.
[  153.345839] xc2028 3-0064: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
[  154.560167] xc2028 3-0064: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000.
[  192.695780] xc2028 3-0064: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
[  193.910163] xc2028 3-0064: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000.
[  205.180525] xc2028 3-0064: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[  205.194604] xc2028 3-0064: Loading SCODE for type=DTV78 DTV8 DIBCOM52 SCODE HAS_IF_5200 (61000300), id 0000000000000000.
[  245.624934] xc2028 3-0064: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
[  246.840157] xc2028 3-0064: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[  246.854188] xc2028 3-0064: Loading SCODE for type=DTV78 DTV8 DIBCOM52 SCODE HAS_IF_5200 (61000300), id 0000000000000000.
[ 1230.095203] xc2028 3-0064: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
[ 1231.310161] xc2028 3-0064: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000.
[ 1231.324207] xc2028 3-0064: Loading SCODE for type=DTV78 DTV8 DIBCOM52 SCODE HAS_IF_5200 (61000300), id 0000000000000000.

Re: cx23885: Hauppauge WinTV HVR-1400 firmware loading problem

[Alina Friedrichsen]

No one has got this card and can say if this is normal (on a stable
kernel) or my hardware is broken?

Regards
Alina

Am Mittwoch, den 17.03.2010, 02:14 +0100 schrieb Alina Friedrichsen:
> My kernel is 2.6.33.
> When I want to watch DVB-T with VLC, loading the firmwares stops after
> the following and don't see any pictures:
> 
> cx23885 0000:03:00.0: firmware: requesting xc3028L-v36.fw
> xc2028 3-0064: Loading 81 firmware images from xc3028L-v36.fw, type:
> xc2028 firmware, ver 3.6
> xc2028 3-0064: Loading firmware for type=BASE F8MHZ (3), id
> 0000000000000000.
> xc2028 3-0064: Loading firmware for type=D2633 DTV7 (90), id
> 0000000000000000.
> 
> And hangs forever. Any retries has the same effect.
> 
> But if I start "scan /usr/share/dvb/dvb-t/de-Berlin" the tuning fails
> two times, then all firmwares load correctly and scanning works.
> 
> xc2028 3-0064: Loading firmware for type=BASE F8MHZ (3), id
> 0000000000000000.
> xc2028 3-0064: Loading firmware for type=D2633 DTV7 (90), id
> 0000000000000000.
> xc2028 3-0064: Loading firmware for type=BASE F8MHZ (3), id
> 0000000000000000.
> xc2028 3-0064: Loading firmware for type=D2633 DTV7 (90), id
> 0000000000000000.
> xc2028 3-0064: Loading firmware for type=D2633 DTV78 (110), id
> 0000000000000000.
> xc2028 3-0064: Loading SCODE for type=DTV78 DTV8 DIBCOM52 SCODE
> HAS_IF_5200 (61000300), id 0000000000000000.
> 
> After that all other firmware loadings works fine and I can watch TV.
> 
> Any idea whats goes wrong? Is this a problem of the driver, or is my
> express card broken? I unfortunately has no other card to test.
> 
> Thanks!
> Alina
> 
> 
> 

Re: Hauppauge WinTV HVR-1400 (XC3028L) firmware loading problem

[Alina Friedrichsen]

Hi,

beginning with kernel 2.6.34.? the HVR-1400 stops working completely.
If I run the scan utility, only the fist tuning works and after that it fails always. On the next run of the utility it says "Device or resource busy". Watching TV with vlc works never.

This bug persist up to the current developer kernel 2.6.37-rc1-git7.

Any ideas? Maybe it's a PCIe/ExpressCard related problem? Some more
popular USB sticks use the same chipset.

Regards,
Alina

-------- Original-Nachricht --------
> Datum: Wed, 17 Mar 2010 02:14:43 +0100
> Von: Alina Friedrichsen <x-alina@gmx.net>
> An: linux-media@vger.kernel.org
> Betreff: Hauppauge WinTV HVR-1400 firmware loading problem

> My kernel is 2.6.33.
> When I want to watch DVB-T with VLC, loading the firmwares stops after
> the following and don't see any pictures:
> 
> cx23885 0000:03:00.0: firmware: requesting xc3028L-v36.fw
> xc2028 3-0064: Loading 81 firmware images from xc3028L-v36.fw, type:
> xc2028 firmware, ver 3.6
> xc2028 3-0064: Loading firmware for type=BASE F8MHZ (3), id
> 0000000000000000.
> xc2028 3-0064: Loading firmware for type=D2633 DTV7 (90), id
> 0000000000000000.
> 
> And hangs forever. Any retries has the same effect.
> 
> But if I start "scan /usr/share/dvb/dvb-t/de-Berlin" the tuning fails
> two times, then all firmwares load correctly and scanning works.
> 
> xc2028 3-0064: Loading firmware for type=BASE F8MHZ (3), id
> 0000000000000000.
> xc2028 3-0064: Loading firmware for type=D2633 DTV7 (90), id
> 0000000000000000.
> xc2028 3-0064: Loading firmware for type=BASE F8MHZ (3), id
> 0000000000000000.
> xc2028 3-0064: Loading firmware for type=D2633 DTV7 (90), id
> 0000000000000000.
> xc2028 3-0064: Loading firmware for type=D2633 DTV78 (110), id
> 0000000000000000.
> xc2028 3-0064: Loading SCODE for type=DTV78 DTV8 DIBCOM52 SCODE
> HAS_IF_5200 (61000300), id 0000000000000000.
> 
> After that all other firmware loadings works fine and I can watch TV.
> 
> Any idea whats goes wrong? Is this a problem of the driver, or is my
> express card broken? I unfortunately has no other card to test.
> 
> Thanks!
> Alina
> 
> 
> 

Re: Hauppauge WinTV HVR-1400 (XC3028L) firmware loading problem

[fabio tirapelle]

> 

> Hi,
> 
> beginning with kernel 2.6.34.? the HVR-1400 stops working  completely.
> If I run the scan utility, only the fist tuning works and after  that it fails 
>always. On the next run of the utility it says "Device or resource  busy". 
>Watching TV with vlc works never.

I think that all the WinTV-HVR will be effected by theese problems. See thread 
"Wintv-HVR-1120 woes"

> 
> This bug persist up to the  current developer kernel 2.6.37-rc1-git7.
> 
> Any ideas? Maybe it's a  PCIe/ExpressCard related problem? Some more
> popular USB sticks use the same  chipset.
> 
> Regards,
> Alina
> 
> -------- Original-Nachricht  --------
> > Datum: Wed, 17 Mar 2010 02:14:43 +0100
> > Von: Alina  Friedrichsen <x-alina@gmx.net>
> > An: linux-media@vger.kernel.org
> >  Betreff: Hauppauge WinTV HVR-1400 firmware loading problem
> 
> > My  kernel is 2.6.33.
> > When I want to watch DVB-T with VLC, loading the  firmwares stops after
> > the following and don't see any pictures:
> > 
> > cx23885 0000:03:00.0: firmware: requesting xc3028L-v36.fw
> >  xc2028 3-0064: Loading 81 firmware images from xc3028L-v36.fw, type:
> >  xc2028 firmware, ver 3.6
> > xc2028 3-0064: Loading firmware for type=BASE  F8MHZ (3), id
> > 0000000000000000.
> > xc2028 3-0064: Loading firmware  for type=D2633 DTV7 (90), id
> > 0000000000000000.
> > 
> > And  hangs forever. Any retries has the same effect.
> > 
> > But if I start  "scan /usr/share/dvb/dvb-t/de-Berlin" the tuning fails
> > two times, then  all firmwares load correctly and scanning works.
> > 
> > xc2028 3-0064:  Loading firmware for type=BASE F8MHZ (3), id
> > 0000000000000000.
> >  xc2028 3-0064: Loading firmware for type=D2633 DTV7 (90), id
> >  0000000000000000.
> > xc2028 3-0064: Loading firmware for type=BASE F8MHZ  (3), id
> > 0000000000000000.
> > xc2028 3-0064: Loading firmware for  type=D2633 DTV7 (90), id
> > 0000000000000000.
> > xc2028 3-0064:  Loading firmware for type=D2633 DTV78 (110), id
> >  0000000000000000.
> > xc2028 3-0064: Loading SCODE for type=DTV78 DTV8  DIBCOM52 SCODE
> > HAS_IF_5200 (61000300), id 0000000000000000.
> > 
> > After that all other firmware loadings works fine and I can watch  TV.
> > 
> > Any idea whats goes wrong? Is this a problem of the driver,  or is my
> > express card broken? I unfortunately has no other card to  test.
> > 
> > Thanks!
> > Alina
> > 
> > 
> > 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media"  in
> the body of a message to majordomo@vger.kernel.org
> More  majordomo info at  http://vger.kernel.org/majordomo-info.html
>