From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail.gmx.net ([213.165.64.20]:55326 "HELO mail.gmx.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with SMTP id S1751421Ab0CSOZg (ORCPT ); Fri, 19 Mar 2010 10:25:36 -0400 Subject: Re: cx23885: Hauppauge WinTV HVR-1400 firmware loading problem From: Alina Friedrichsen To: linux-media@vger.kernel.org In-Reply-To: <1268788483.1536.24.camel@destiny> References: <1268788483.1536.24.camel@destiny> Content-Type: text/plain; charset="UTF-8" Date: Fri, 19 Mar 2010 15:25:33 +0100 Message-ID: <1269008733.1645.8.camel@destiny> Mime-Version: 1.0 Content-Transfer-Encoding: 7bit Sender: linux-media-owner@vger.kernel.org List-ID: No one has got this card and can say if this is normal (on a stable kernel) or my hardware is broken? Regards Alina Am Mittwoch, den 17.03.2010, 02:14 +0100 schrieb Alina Friedrichsen: > My kernel is 2.6.33. > When I want to watch DVB-T with VLC, loading the firmwares stops after > the following and don't see any pictures: > > cx23885 0000:03:00.0: firmware: requesting xc3028L-v36.fw > xc2028 3-0064: Loading 81 firmware images from xc3028L-v36.fw, type: > xc2028 firmware, ver 3.6 > xc2028 3-0064: Loading firmware for type=BASE F8MHZ (3), id > 0000000000000000. > xc2028 3-0064: Loading firmware for type=D2633 DTV7 (90), id > 0000000000000000. > > And hangs forever. Any retries has the same effect. > > But if I start "scan /usr/share/dvb/dvb-t/de-Berlin" the tuning fails > two times, then all firmwares load correctly and scanning works. > > xc2028 3-0064: Loading firmware for type=BASE F8MHZ (3), id > 0000000000000000. > xc2028 3-0064: Loading firmware for type=D2633 DTV7 (90), id > 0000000000000000. > xc2028 3-0064: Loading firmware for type=BASE F8MHZ (3), id > 0000000000000000. > xc2028 3-0064: Loading firmware for type=D2633 DTV7 (90), id > 0000000000000000. > xc2028 3-0064: Loading firmware for type=D2633 DTV78 (110), id > 0000000000000000. > xc2028 3-0064: Loading SCODE for type=DTV78 DTV8 DIBCOM52 SCODE > HAS_IF_5200 (61000300), id 0000000000000000. > > After that all other firmware loadings works fine and I can watch TV. > > Any idea whats goes wrong? Is this a problem of the driver, or is my > express card broken? I unfortunately has no other card to test. > > Thanks! > Alina > > >