* [PATCH 1/2] Davinci: Create seperate Kconfig file for davinci devices
@ 2010-05-27 13:11 hvaibhav
2010-06-02 13:53 ` Karicheri, Muralidharan
0 siblings, 1 reply; 4+ messages in thread
From: hvaibhav @ 2010-05-27 13:11 UTC (permalink / raw)
To: linux-media; +Cc: mchehab, m-karicheri2, linux-omap, Vaibhav Hiremath
From: Vaibhav Hiremath <hvaibhav@ti.com>
Currently VPFE Capture driver and DM6446 CCDC driver is being
reused for AM3517. So this patch is preparing the Kconfig/makefile
for re-use of such IP's.
Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
---
drivers/media/video/Kconfig | 61 +----------------------
drivers/media/video/Makefile | 2 +-
drivers/media/video/davinci/Kconfig | 93 +++++++++++++++++++++++++++++++++++
3 files changed, 95 insertions(+), 61 deletions(-)
create mode 100644 drivers/media/video/davinci/Kconfig
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index ad9e6f9..e5d74ae 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -570,66 +570,7 @@ config VIDEO_VIVI
Say Y here if you want to test video apps or debug V4L devices.
In doubt, say N.
-config VIDEO_VPSS_SYSTEM
- tristate "VPSS System module driver"
- depends on ARCH_DAVINCI
- help
- Support for vpss system module for video driver
-
-config VIDEO_VPFE_CAPTURE
- tristate "VPFE Video Capture Driver"
- depends on VIDEO_V4L2 && ARCH_DAVINCI
- select VIDEOBUF_DMA_CONTIG
- help
- Support for DMXXXX VPFE based frame grabber. This is the
- common V4L2 module for following DMXXX SoCs from Texas
- Instruments:- DM6446 & DM355.
-
- To compile this driver as a module, choose M here: the
- module will be called vpfe-capture.
-
-config VIDEO_DM6446_CCDC
- tristate "DM6446 CCDC HW module"
- depends on ARCH_DAVINCI_DM644x && VIDEO_VPFE_CAPTURE
- select VIDEO_VPSS_SYSTEM
- default y
- help
- Enables DaVinci CCD hw module. DaVinci CCDC hw interfaces
- with decoder modules such as TVP5146 over BT656 or
- sensor module such as MT9T001 over a raw interface. This
- module configures the interface and CCDC/ISIF to do
- video frame capture from slave decoders.
-
- To compile this driver as a module, choose M here: the
- module will be called vpfe.
-
-config VIDEO_DM355_CCDC
- tristate "DM355 CCDC HW module"
- depends on ARCH_DAVINCI_DM355 && VIDEO_VPFE_CAPTURE
- select VIDEO_VPSS_SYSTEM
- default y
- help
- Enables DM355 CCD hw module. DM355 CCDC hw interfaces
- with decoder modules such as TVP5146 over BT656 or
- sensor module such as MT9T001 over a raw interface. This
- module configures the interface and CCDC/ISIF to do
- video frame capture from a slave decoders
-
- To compile this driver as a module, choose M here: the
- module will be called vpfe.
-
-config VIDEO_ISIF
- tristate "ISIF HW module"
- depends on ARCH_DAVINCI_DM365 && VIDEO_VPFE_CAPTURE
- select VIDEO_VPSS_SYSTEM
- default y
- help
- Enables ISIF hw module. This is the hardware module for
- configuring ISIF in VPFE to capture Raw Bayer RGB data from
- a image sensor or YUV data from a YUV source.
-
- To compile this driver as a module, choose M here: the
- module will be called vpfe.
+source "drivers/media/video/davinci/Kconfig"
source "drivers/media/video/omap/Kconfig"
diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
index cc93859..aa1ea2f 100644
--- a/drivers/media/video/Makefile
+++ b/drivers/media/video/Makefile
@@ -177,7 +177,7 @@ obj-$(CONFIG_VIDEO_SAA7164) += saa7164/
obj-$(CONFIG_VIDEO_IR_I2C) += ir-kbd-i2c.o
-obj-$(CONFIG_ARCH_DAVINCI) += davinci/
+obj-y += davinci/
obj-$(CONFIG_ARCH_OMAP) += omap/
diff --git a/drivers/media/video/davinci/Kconfig b/drivers/media/video/davinci/Kconfig
new file mode 100644
index 0000000..97f889d
--- /dev/null
+++ b/drivers/media/video/davinci/Kconfig
@@ -0,0 +1,93 @@
+config DISPLAY_DAVINCI_DM646X_EVM
+ tristate "DM646x EVM Video Display"
+ depends on VIDEO_DEV && MACH_DAVINCI_DM6467_EVM
+ select VIDEOBUF_DMA_CONTIG
+ select VIDEO_DAVINCI_VPIF
+ select VIDEO_ADV7343
+ select VIDEO_THS7303
+ help
+ Support for DM6467 based display device.
+
+ To compile this driver as a module, choose M here: the
+ module will be called vpif_display.
+
+config CAPTURE_DAVINCI_DM646X_EVM
+ tristate "DM646x EVM Video Capture"
+ depends on VIDEO_DEV && MACH_DAVINCI_DM6467_EVM
+ select VIDEOBUF_DMA_CONTIG
+ select VIDEO_DAVINCI_VPIF
+ help
+ Support for DM6467 based capture device.
+
+ To compile this driver as a module, choose M here: the
+ module will be called vpif_capture.
+
+config VIDEO_DAVINCI_VPIF
+ tristate "DaVinci VPIF Driver"
+ depends on DISPLAY_DAVINCI_DM646X_EVM
+ help
+ Support for DaVinci VPIF Driver.
+
+ To compile this driver as a module, choose M here: the
+ module will be called vpif.
+
+config VIDEO_VPSS_SYSTEM
+ tristate "VPSS System module driver"
+ depends on ARCH_DAVINCI
+ help
+ Support for vpss system module for video driver
+
+config VIDEO_VPFE_CAPTURE
+ tristate "VPFE Video Capture Driver"
+ depends on VIDEO_V4L2 && (ARCH_DAVINCI || ARCH_OMAP3)
+ select VIDEOBUF_DMA_CONTIG
+ help
+ Support for DMx/AMx VPFE based frame grabber. This is the
+ common V4L2 module for following DMx/AMx SoCs from Texas
+ Instruments:- DM6446, DM355 & AM3517/05.
+
+ To compile this driver as a module, choose M here: the
+ module will be called vpfe-capture.
+
+config VIDEO_DM6446_CCDC
+ tristate "DM6446 CCDC HW module"
+ depends on VIDEO_VPFE_CAPTURE
+ select VIDEO_VPSS_SYSTEM
+ default y
+ help
+ Enables DaVinci CCD hw module. DaVinci CCDC hw interfaces
+ with decoder modules such as TVP5146 over BT656 or
+ sensor module such as MT9T001 over a raw interface. This
+ module configures the interface and CCDC/ISIF to do
+ video frame capture from slave decoders.
+
+ To compile this driver as a module, choose M here: the
+ module will be called vpfe.
+
+config VIDEO_DM355_CCDC
+ tristate "DM355 CCDC HW module"
+ depends on ARCH_DAVINCI_DM355 && VIDEO_VPFE_CAPTURE
+ select VIDEO_VPSS_SYSTEM
+ default y
+ help
+ Enables DM355 CCD hw module. DM355 CCDC hw interfaces
+ with decoder modules such as TVP5146 over BT656 or
+ sensor module such as MT9T001 over a raw interface. This
+ module configures the interface and CCDC/ISIF to do
+ video frame capture from a slave decoders
+
+ To compile this driver as a module, choose M here: the
+ module will be called vpfe.
+
+config VIDEO_ISIF
+ tristate "ISIF HW module"
+ depends on ARCH_DAVINCI_DM365 && VIDEO_VPFE_CAPTURE
+ select VIDEO_VPSS_SYSTEM
+ default y
+ help
+ Enables ISIF hw module. This is the hardware module for
+ configuring ISIF in VPFE to capture Raw Bayer RGB data from
+ a image sensor or YUV data from a YUV source.
+
+ To compile this driver as a module, choose M here: the
+ module will be called vpfe.
--
1.6.2.4
^ permalink raw reply related [flat|nested] 4+ messages in thread
* RE: [PATCH 1/2] Davinci: Create seperate Kconfig file for davinci devices
2010-05-27 13:11 [PATCH 1/2] Davinci: Create seperate Kconfig file for davinci devices hvaibhav
@ 2010-06-02 13:53 ` Karicheri, Muralidharan
2010-06-02 13:59 ` Hiremath, Vaibhav
0 siblings, 1 reply; 4+ messages in thread
From: Karicheri, Muralidharan @ 2010-06-02 13:53 UTC (permalink / raw)
To: Hiremath, Vaibhav, linux-media@vger.kernel.org
Cc: mchehab@redhat.com, linux-omap@vger.kernel.org
Murali Karicheri
Software Design Engineer
Texas Instruments Inc.
Germantown, MD 20874
phone: 301-407-9583
email: m-karicheri2@ti.com
>-----Original Message-----
>From: Hiremath, Vaibhav
>Sent: Thursday, May 27, 2010 9:11 AM
>To: linux-media@vger.kernel.org
>Cc: mchehab@redhat.com; Karicheri, Muralidharan; linux-
>omap@vger.kernel.org; Hiremath, Vaibhav
>Subject: [PATCH 1/2] Davinci: Create seperate Kconfig file for davinci
>devices
>
>From: Vaibhav Hiremath <hvaibhav@ti.com>
>
>Currently VPFE Capture driver and DM6446 CCDC driver is being
>reused for AM3517. So this patch is preparing the Kconfig/makefile
>for re-use of such IP's.
>
>Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
>---
> drivers/media/video/Kconfig | 61 +----------------------
> drivers/media/video/Makefile | 2 +-
> drivers/media/video/davinci/Kconfig | 93
>+++++++++++++++++++++++++++++++++++
> 3 files changed, 95 insertions(+), 61 deletions(-)
> create mode 100644 drivers/media/video/davinci/Kconfig
>
>diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
>index ad9e6f9..e5d74ae 100644
>--- a/drivers/media/video/Kconfig
>+++ b/drivers/media/video/Kconfig
>@@ -570,66 +570,7 @@ config VIDEO_VIVI
> Say Y here if you want to test video apps or debug V4L devices.
> In doubt, say N.
>
>-config VIDEO_VPSS_SYSTEM
>- tristate "VPSS System module driver"
>- depends on ARCH_DAVINCI
>- help
>- Support for vpss system module for video driver
>-
>-config VIDEO_VPFE_CAPTURE
>- tristate "VPFE Video Capture Driver"
>- depends on VIDEO_V4L2 && ARCH_DAVINCI
>- select VIDEOBUF_DMA_CONTIG
>- help
>- Support for DMXXXX VPFE based frame grabber. This is the
>- common V4L2 module for following DMXXX SoCs from Texas
>- Instruments:- DM6446 & DM355.
>-
Vaibhav,
Could you also list DM365 here? This was somehow missed.
>- To compile this driver as a module, choose M here: the
>- module will be called vpfe-capture.
>-
>-config VIDEO_DM6446_CCDC
>- tristate "DM6446 CCDC HW module"
>- depends on ARCH_DAVINCI_DM644x && VIDEO_VPFE_CAPTURE
>- select VIDEO_VPSS_SYSTEM
>- default y
>- help
>- Enables DaVinci CCD hw module. DaVinci CCDC hw interfaces
>- with decoder modules such as TVP5146 over BT656 or
>- sensor module such as MT9T001 over a raw interface. This
>- module configures the interface and CCDC/ISIF to do
>- video frame capture from slave decoders.
>-
>- To compile this driver as a module, choose M here: the
>- module will be called vpfe.
>-
>-config VIDEO_DM355_CCDC
>- tristate "DM355 CCDC HW module"
>- depends on ARCH_DAVINCI_DM355 && VIDEO_VPFE_CAPTURE
>- select VIDEO_VPSS_SYSTEM
>- default y
>- help
>- Enables DM355 CCD hw module. DM355 CCDC hw interfaces
>- with decoder modules such as TVP5146 over BT656 or
>- sensor module such as MT9T001 over a raw interface. This
>- module configures the interface and CCDC/ISIF to do
>- video frame capture from a slave decoders
>-
>- To compile this driver as a module, choose M here: the
>- module will be called vpfe.
>-
>-config VIDEO_ISIF
>- tristate "ISIF HW module"
>- depends on ARCH_DAVINCI_DM365 && VIDEO_VPFE_CAPTURE
>- select VIDEO_VPSS_SYSTEM
>- default y
>- help
>- Enables ISIF hw module. This is the hardware module for
>- configuring ISIF in VPFE to capture Raw Bayer RGB data from
>- a image sensor or YUV data from a YUV source.
>-
>- To compile this driver as a module, choose M here: the
>- module will be called vpfe.
>+source "drivers/media/video/davinci/Kconfig"
>
> source "drivers/media/video/omap/Kconfig"
>
>diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
>index cc93859..aa1ea2f 100644
>--- a/drivers/media/video/Makefile
>+++ b/drivers/media/video/Makefile
>@@ -177,7 +177,7 @@ obj-$(CONFIG_VIDEO_SAA7164) += saa7164/
>
> obj-$(CONFIG_VIDEO_IR_I2C) += ir-kbd-i2c.o
>
>-obj-$(CONFIG_ARCH_DAVINCI) += davinci/
>+obj-y += davinci/
>
> obj-$(CONFIG_ARCH_OMAP) += omap/
>
>diff --git a/drivers/media/video/davinci/Kconfig
>b/drivers/media/video/davinci/Kconfig
>new file mode 100644
>index 0000000..97f889d
>--- /dev/null
>+++ b/drivers/media/video/davinci/Kconfig
>@@ -0,0 +1,93 @@
>+config DISPLAY_DAVINCI_DM646X_EVM
>+ tristate "DM646x EVM Video Display"
>+ depends on VIDEO_DEV && MACH_DAVINCI_DM6467_EVM
>+ select VIDEOBUF_DMA_CONTIG
>+ select VIDEO_DAVINCI_VPIF
>+ select VIDEO_ADV7343
>+ select VIDEO_THS7303
>+ help
>+ Support for DM6467 based display device.
>+
>+ To compile this driver as a module, choose M here: the
>+ module will be called vpif_display.
>+
>+config CAPTURE_DAVINCI_DM646X_EVM
>+ tristate "DM646x EVM Video Capture"
>+ depends on VIDEO_DEV && MACH_DAVINCI_DM6467_EVM
>+ select VIDEOBUF_DMA_CONTIG
>+ select VIDEO_DAVINCI_VPIF
>+ help
>+ Support for DM6467 based capture device.
>+
>+ To compile this driver as a module, choose M here: the
>+ module will be called vpif_capture.
>+
>+config VIDEO_DAVINCI_VPIF
>+ tristate "DaVinci VPIF Driver"
>+ depends on DISPLAY_DAVINCI_DM646X_EVM
>+ help
>+ Support for DaVinci VPIF Driver.
>+
>+ To compile this driver as a module, choose M here: the
>+ module will be called vpif.
>+
>+config VIDEO_VPSS_SYSTEM
>+ tristate "VPSS System module driver"
>+ depends on ARCH_DAVINCI
>+ help
>+ Support for vpss system module for video driver
>+
>+config VIDEO_VPFE_CAPTURE
>+ tristate "VPFE Video Capture Driver"
>+ depends on VIDEO_V4L2 && (ARCH_DAVINCI || ARCH_OMAP3)
>+ select VIDEOBUF_DMA_CONTIG
>+ help
>+ Support for DMx/AMx VPFE based frame grabber. This is the
>+ common V4L2 module for following DMx/AMx SoCs from Texas
>+ Instruments:- DM6446, DM355 & AM3517/05.
>+
>+ To compile this driver as a module, choose M here: the
>+ module will be called vpfe-capture.
>+
>+config VIDEO_DM6446_CCDC
>+ tristate "DM6446 CCDC HW module"
>+ depends on VIDEO_VPFE_CAPTURE
>+ select VIDEO_VPSS_SYSTEM
>+ default y
>+ help
>+ Enables DaVinci CCD hw module. DaVinci CCDC hw interfaces
>+ with decoder modules such as TVP5146 over BT656 or
>+ sensor module such as MT9T001 over a raw interface. This
>+ module configures the interface and CCDC/ISIF to do
>+ video frame capture from slave decoders.
>+
>+ To compile this driver as a module, choose M here: the
>+ module will be called vpfe.
>+
>+config VIDEO_DM355_CCDC
>+ tristate "DM355 CCDC HW module"
>+ depends on ARCH_DAVINCI_DM355 && VIDEO_VPFE_CAPTURE
>+ select VIDEO_VPSS_SYSTEM
>+ default y
>+ help
>+ Enables DM355 CCD hw module. DM355 CCDC hw interfaces
>+ with decoder modules such as TVP5146 over BT656 or
>+ sensor module such as MT9T001 over a raw interface. This
>+ module configures the interface and CCDC/ISIF to do
>+ video frame capture from a slave decoders
>+
>+ To compile this driver as a module, choose M here: the
>+ module will be called vpfe.
>+
>+config VIDEO_ISIF
>+ tristate "ISIF HW module"
>+ depends on ARCH_DAVINCI_DM365 && VIDEO_VPFE_CAPTURE
>+ select VIDEO_VPSS_SYSTEM
>+ default y
>+ help
>+ Enables ISIF hw module. This is the hardware module for
>+ configuring ISIF in VPFE to capture Raw Bayer RGB data from
>+ a image sensor or YUV data from a YUV source.
>+
>+ To compile this driver as a module, choose M here: the
>+ module will be called vpfe.
>--
>1.6.2.4
^ permalink raw reply [flat|nested] 4+ messages in thread
* RE: [PATCH 1/2] Davinci: Create seperate Kconfig file for davinci devices
2010-06-02 13:53 ` Karicheri, Muralidharan
@ 2010-06-02 13:59 ` Hiremath, Vaibhav
2010-06-02 14:04 ` Karicheri, Muralidharan
0 siblings, 1 reply; 4+ messages in thread
From: Hiremath, Vaibhav @ 2010-06-02 13:59 UTC (permalink / raw)
To: Karicheri, Muralidharan, linux-media@vger.kernel.org
Cc: mchehab@redhat.com, linux-omap@vger.kernel.org
________________________________________
From: Karicheri, Muralidharan
Sent: Wednesday, June 02, 2010 7:23 PM
To: Hiremath, Vaibhav; linux-media@vger.kernel.org
Cc: mchehab@redhat.com; linux-omap@vger.kernel.org
Subject: RE: [PATCH 1/2] Davinci: Create seperate Kconfig file for davinci devices
Murali Karicheri
Software Design Engineer
Texas Instruments Inc.
Germantown, MD 20874
phone: 301-407-9583
email: m-karicheri2@ti.com
>-----Original Message-----
>From: Hiremath, Vaibhav
>Sent: Thursday, May 27, 2010 9:11 AM
>To: linux-media@vger.kernel.org
>Cc: mchehab@redhat.com; Karicheri, Muralidharan; linux-
>omap@vger.kernel.org; Hiremath, Vaibhav
>Subject: [PATCH 1/2] Davinci: Create seperate Kconfig file for davinci
>devices
>
>From: Vaibhav Hiremath <hvaibhav@ti.com>
>
>Currently VPFE Capture driver and DM6446 CCDC driver is being
>reused for AM3517. So this patch is preparing the Kconfig/makefile
>for re-use of such IP's.
>
>Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
>---
> drivers/media/video/Kconfig | 61 +----------------------
> drivers/media/video/Makefile | 2 +-
> drivers/media/video/davinci/Kconfig | 93
>+++++++++++++++++++++++++++++++++++
> 3 files changed, 95 insertions(+), 61 deletions(-)
> create mode 100644 drivers/media/video/davinci/Kconfig
>
>diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
>index ad9e6f9..e5d74ae 100644
>--- a/drivers/media/video/Kconfig
>+++ b/drivers/media/video/Kconfig
>@@ -570,66 +570,7 @@ config VIDEO_VIVI
> Say Y here if you want to test video apps or debug V4L devices.
> In doubt, say N.
>
>-config VIDEO_VPSS_SYSTEM
>- tristate "VPSS System module driver"
>- depends on ARCH_DAVINCI
>- help
>- Support for vpss system module for video driver
>-
>-config VIDEO_VPFE_CAPTURE
>- tristate "VPFE Video Capture Driver"
>- depends on VIDEO_V4L2 && ARCH_DAVINCI
>- select VIDEOBUF_DMA_CONTIG
>- help
>- Support for DMXXXX VPFE based frame grabber. This is the
>- common V4L2 module for following DMXXX SoCs from Texas
>- Instruments:- DM6446 & DM355.
>-
>> Vaibhav,
>> Could you also list DM365 here? This was somehow missed.
I believe you are referring to
Instruments:- DM6446, DM365 & DM355
Submitting this patch alone with this change.
Thanks,
Vaibhav
>- To compile this driver as a module, choose M here: the
>- module will be called vpfe-capture.
>-
>-config VIDEO_DM6446_CCDC
>- tristate "DM6446 CCDC HW module"
>- depends on ARCH_DAVINCI_DM644x && VIDEO_VPFE_CAPTURE
>- select VIDEO_VPSS_SYSTEM
>- default y
>- help
>- Enables DaVinci CCD hw module. DaVinci CCDC hw interfaces
>- with decoder modules such as TVP5146 over BT656 or
>- sensor module such as MT9T001 over a raw interface. This
>- module configures the interface and CCDC/ISIF to do
>- video frame capture from slave decoders.
>-
>- To compile this driver as a module, choose M here: the
>- module will be called vpfe.
>-
>-config VIDEO_DM355_CCDC
>- tristate "DM355 CCDC HW module"
>- depends on ARCH_DAVINCI_DM355 && VIDEO_VPFE_CAPTURE
>- select VIDEO_VPSS_SYSTEM
>- default y
>- help
>- Enables DM355 CCD hw module. DM355 CCDC hw interfaces
>- with decoder modules such as TVP5146 over BT656 or
>- sensor module such as MT9T001 over a raw interface. This
>- module configures the interface and CCDC/ISIF to do
>- video frame capture from a slave decoders
>-
>- To compile this driver as a module, choose M here: the
>- module will be called vpfe.
>-
>-config VIDEO_ISIF
>- tristate "ISIF HW module"
>- depends on ARCH_DAVINCI_DM365 && VIDEO_VPFE_CAPTURE
>- select VIDEO_VPSS_SYSTEM
>- default y
>- help
>- Enables ISIF hw module. This is the hardware module for
>- configuring ISIF in VPFE to capture Raw Bayer RGB data from
>- a image sensor or YUV data from a YUV source.
>-
>- To compile this driver as a module, choose M here: the
>- module will be called vpfe.
>+source "drivers/media/video/davinci/Kconfig"
>
> source "drivers/media/video/omap/Kconfig"
>
>diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
>index cc93859..aa1ea2f 100644
>--- a/drivers/media/video/Makefile
>+++ b/drivers/media/video/Makefile
>@@ -177,7 +177,7 @@ obj-$(CONFIG_VIDEO_SAA7164) += saa7164/
>
> obj-$(CONFIG_VIDEO_IR_I2C) += ir-kbd-i2c.o
>
>-obj-$(CONFIG_ARCH_DAVINCI) += davinci/
>+obj-y += davinci/
>
> obj-$(CONFIG_ARCH_OMAP) += omap/
>
>diff --git a/drivers/media/video/davinci/Kconfig
>b/drivers/media/video/davinci/Kconfig
>new file mode 100644
>index 0000000..97f889d
>--- /dev/null
>+++ b/drivers/media/video/davinci/Kconfig
>@@ -0,0 +1,93 @@
>+config DISPLAY_DAVINCI_DM646X_EVM
>+ tristate "DM646x EVM Video Display"
>+ depends on VIDEO_DEV && MACH_DAVINCI_DM6467_EVM
>+ select VIDEOBUF_DMA_CONTIG
>+ select VIDEO_DAVINCI_VPIF
>+ select VIDEO_ADV7343
>+ select VIDEO_THS7303
>+ help
>+ Support for DM6467 based display device.
>+
>+ To compile this driver as a module, choose M here: the
>+ module will be called vpif_display.
>+
>+config CAPTURE_DAVINCI_DM646X_EVM
>+ tristate "DM646x EVM Video Capture"
>+ depends on VIDEO_DEV && MACH_DAVINCI_DM6467_EVM
>+ select VIDEOBUF_DMA_CONTIG
>+ select VIDEO_DAVINCI_VPIF
>+ help
>+ Support for DM6467 based capture device.
>+
>+ To compile this driver as a module, choose M here: the
>+ module will be called vpif_capture.
>+
>+config VIDEO_DAVINCI_VPIF
>+ tristate "DaVinci VPIF Driver"
>+ depends on DISPLAY_DAVINCI_DM646X_EVM
>+ help
>+ Support for DaVinci VPIF Driver.
>+
>+ To compile this driver as a module, choose M here: the
>+ module will be called vpif.
>+
>+config VIDEO_VPSS_SYSTEM
>+ tristate "VPSS System module driver"
>+ depends on ARCH_DAVINCI
>+ help
>+ Support for vpss system module for video driver
>+
>+config VIDEO_VPFE_CAPTURE
>+ tristate "VPFE Video Capture Driver"
>+ depends on VIDEO_V4L2 && (ARCH_DAVINCI || ARCH_OMAP3)
>+ select VIDEOBUF_DMA_CONTIG
>+ help
>+ Support for DMx/AMx VPFE based frame grabber. This is the
>+ common V4L2 module for following DMx/AMx SoCs from Texas
>+ Instruments:- DM6446, DM355 & AM3517/05.
>+
>+ To compile this driver as a module, choose M here: the
>+ module will be called vpfe-capture.
>+
>+config VIDEO_DM6446_CCDC
>+ tristate "DM6446 CCDC HW module"
>+ depends on VIDEO_VPFE_CAPTURE
>+ select VIDEO_VPSS_SYSTEM
>+ default y
>+ help
>+ Enables DaVinci CCD hw module. DaVinci CCDC hw interfaces
>+ with decoder modules such as TVP5146 over BT656 or
>+ sensor module such as MT9T001 over a raw interface. This
>+ module configures the interface and CCDC/ISIF to do
>+ video frame capture from slave decoders.
>+
>+ To compile this driver as a module, choose M here: the
>+ module will be called vpfe.
>+
>+config VIDEO_DM355_CCDC
>+ tristate "DM355 CCDC HW module"
>+ depends on ARCH_DAVINCI_DM355 && VIDEO_VPFE_CAPTURE
>+ select VIDEO_VPSS_SYSTEM
>+ default y
>+ help
>+ Enables DM355 CCD hw module. DM355 CCDC hw interfaces
>+ with decoder modules such as TVP5146 over BT656 or
>+ sensor module such as MT9T001 over a raw interface. This
>+ module configures the interface and CCDC/ISIF to do
>+ video frame capture from a slave decoders
>+
>+ To compile this driver as a module, choose M here: the
>+ module will be called vpfe.
>+
>+config VIDEO_ISIF
>+ tristate "ISIF HW module"
>+ depends on ARCH_DAVINCI_DM365 && VIDEO_VPFE_CAPTURE
>+ select VIDEO_VPSS_SYSTEM
>+ default y
>+ help
>+ Enables ISIF hw module. This is the hardware module for
>+ configuring ISIF in VPFE to capture Raw Bayer RGB data from
>+ a image sensor or YUV data from a YUV source.
>+
>+ To compile this driver as a module, choose M here: the
>+ module will be called vpfe.
>--
>1.6.2.4
^ permalink raw reply [flat|nested] 4+ messages in thread
* RE: [PATCH 1/2] Davinci: Create seperate Kconfig file for davinci devices
2010-06-02 13:59 ` Hiremath, Vaibhav
@ 2010-06-02 14:04 ` Karicheri, Muralidharan
0 siblings, 0 replies; 4+ messages in thread
From: Karicheri, Muralidharan @ 2010-06-02 14:04 UTC (permalink / raw)
To: Hiremath, Vaibhav, linux-media@vger.kernel.org
Cc: mchehab@redhat.com, linux-omap@vger.kernel.org
>>> Vaibhav,
>
>>> Could you also list DM365 here? This was somehow missed.
>
>I believe you are referring to
>
>Instruments:- DM6446, DM365 & DM355
yes. Thanks.
>
>Submitting this patch alone with this change.
>
>Thanks,
>Vaibhav
>
>>- To compile this driver as a module, choose M here: the
>>- module will be called vpfe-capture.
>>-
>>-config VIDEO_DM6446_CCDC
>>- tristate "DM6446 CCDC HW module"
>>- depends on ARCH_DAVINCI_DM644x && VIDEO_VPFE_CAPTURE
>>- select VIDEO_VPSS_SYSTEM
>>- default y
>>- help
>>- Enables DaVinci CCD hw module. DaVinci CCDC hw interfaces
>>- with decoder modules such as TVP5146 over BT656 or
>>- sensor module such as MT9T001 over a raw interface. This
>>- module configures the interface and CCDC/ISIF to do
>>- video frame capture from slave decoders.
>>-
>>- To compile this driver as a module, choose M here: the
>>- module will be called vpfe.
>>-
>>-config VIDEO_DM355_CCDC
>>- tristate "DM355 CCDC HW module"
>>- depends on ARCH_DAVINCI_DM355 && VIDEO_VPFE_CAPTURE
>>- select VIDEO_VPSS_SYSTEM
>>- default y
>>- help
>>- Enables DM355 CCD hw module. DM355 CCDC hw interfaces
>>- with decoder modules such as TVP5146 over BT656 or
>>- sensor module such as MT9T001 over a raw interface. This
>>- module configures the interface and CCDC/ISIF to do
>>- video frame capture from a slave decoders
>>-
>>- To compile this driver as a module, choose M here: the
>>- module will be called vpfe.
>>-
>>-config VIDEO_ISIF
>>- tristate "ISIF HW module"
>>- depends on ARCH_DAVINCI_DM365 && VIDEO_VPFE_CAPTURE
>>- select VIDEO_VPSS_SYSTEM
>>- default y
>>- help
>>- Enables ISIF hw module. This is the hardware module for
>>- configuring ISIF in VPFE to capture Raw Bayer RGB data from
>>- a image sensor or YUV data from a YUV source.
>>-
>>- To compile this driver as a module, choose M here: the
>>- module will be called vpfe.
>>+source "drivers/media/video/davinci/Kconfig"
>>
>> source "drivers/media/video/omap/Kconfig"
>>
>>diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
>>index cc93859..aa1ea2f 100644
>>--- a/drivers/media/video/Makefile
>>+++ b/drivers/media/video/Makefile
>>@@ -177,7 +177,7 @@ obj-$(CONFIG_VIDEO_SAA7164) += saa7164/
>>
>> obj-$(CONFIG_VIDEO_IR_I2C) += ir-kbd-i2c.o
>>
>>-obj-$(CONFIG_ARCH_DAVINCI) += davinci/
>>+obj-y += davinci/
>>
>> obj-$(CONFIG_ARCH_OMAP) += omap/
>>
>>diff --git a/drivers/media/video/davinci/Kconfig
>>b/drivers/media/video/davinci/Kconfig
>>new file mode 100644
>>index 0000000..97f889d
>>--- /dev/null
>>+++ b/drivers/media/video/davinci/Kconfig
>>@@ -0,0 +1,93 @@
>>+config DISPLAY_DAVINCI_DM646X_EVM
>>+ tristate "DM646x EVM Video Display"
>>+ depends on VIDEO_DEV && MACH_DAVINCI_DM6467_EVM
>>+ select VIDEOBUF_DMA_CONTIG
>>+ select VIDEO_DAVINCI_VPIF
>>+ select VIDEO_ADV7343
>>+ select VIDEO_THS7303
>>+ help
>>+ Support for DM6467 based display device.
>>+
>>+ To compile this driver as a module, choose M here: the
>>+ module will be called vpif_display.
>>+
>>+config CAPTURE_DAVINCI_DM646X_EVM
>>+ tristate "DM646x EVM Video Capture"
>>+ depends on VIDEO_DEV && MACH_DAVINCI_DM6467_EVM
>>+ select VIDEOBUF_DMA_CONTIG
>>+ select VIDEO_DAVINCI_VPIF
>>+ help
>>+ Support for DM6467 based capture device.
>>+
>>+ To compile this driver as a module, choose M here: the
>>+ module will be called vpif_capture.
>>+
>>+config VIDEO_DAVINCI_VPIF
>>+ tristate "DaVinci VPIF Driver"
>>+ depends on DISPLAY_DAVINCI_DM646X_EVM
>>+ help
>>+ Support for DaVinci VPIF Driver.
>>+
>>+ To compile this driver as a module, choose M here: the
>>+ module will be called vpif.
>>+
>>+config VIDEO_VPSS_SYSTEM
>>+ tristate "VPSS System module driver"
>>+ depends on ARCH_DAVINCI
>>+ help
>>+ Support for vpss system module for video driver
>>+
>>+config VIDEO_VPFE_CAPTURE
>>+ tristate "VPFE Video Capture Driver"
>>+ depends on VIDEO_V4L2 && (ARCH_DAVINCI || ARCH_OMAP3)
>>+ select VIDEOBUF_DMA_CONTIG
>>+ help
>>+ Support for DMx/AMx VPFE based frame grabber. This is the
>>+ common V4L2 module for following DMx/AMx SoCs from Texas
>>+ Instruments:- DM6446, DM355 & AM3517/05.
>>+
>>+ To compile this driver as a module, choose M here: the
>>+ module will be called vpfe-capture.
>>+
>>+config VIDEO_DM6446_CCDC
>>+ tristate "DM6446 CCDC HW module"
>>+ depends on VIDEO_VPFE_CAPTURE
>>+ select VIDEO_VPSS_SYSTEM
>>+ default y
>>+ help
>>+ Enables DaVinci CCD hw module. DaVinci CCDC hw interfaces
>>+ with decoder modules such as TVP5146 over BT656 or
>>+ sensor module such as MT9T001 over a raw interface. This
>>+ module configures the interface and CCDC/ISIF to do
>>+ video frame capture from slave decoders.
>>+
>>+ To compile this driver as a module, choose M here: the
>>+ module will be called vpfe.
>>+
>>+config VIDEO_DM355_CCDC
>>+ tristate "DM355 CCDC HW module"
>>+ depends on ARCH_DAVINCI_DM355 && VIDEO_VPFE_CAPTURE
>>+ select VIDEO_VPSS_SYSTEM
>>+ default y
>>+ help
>>+ Enables DM355 CCD hw module. DM355 CCDC hw interfaces
>>+ with decoder modules such as TVP5146 over BT656 or
>>+ sensor module such as MT9T001 over a raw interface. This
>>+ module configures the interface and CCDC/ISIF to do
>>+ video frame capture from a slave decoders
>>+
>>+ To compile this driver as a module, choose M here: the
>>+ module will be called vpfe.
>>+
>>+config VIDEO_ISIF
>>+ tristate "ISIF HW module"
>>+ depends on ARCH_DAVINCI_DM365 && VIDEO_VPFE_CAPTURE
>>+ select VIDEO_VPSS_SYSTEM
>>+ default y
>>+ help
>>+ Enables ISIF hw module. This is the hardware module for
>>+ configuring ISIF in VPFE to capture Raw Bayer RGB data from
>>+ a image sensor or YUV data from a YUV source.
>>+
>>+ To compile this driver as a module, choose M here: the
>>+ module will be called vpfe.
>>--
>>1.6.2.4
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2010-06-02 14:04 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-05-27 13:11 [PATCH 1/2] Davinci: Create seperate Kconfig file for davinci devices hvaibhav
2010-06-02 13:53 ` Karicheri, Muralidharan
2010-06-02 13:59 ` Hiremath, Vaibhav
2010-06-02 14:04 ` Karicheri, Muralidharan
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).