From: "Ole W. Saastad" <olewsaa@online.no>
To: Jan Hoogenraad <jan-conceptronic@hoogenraad.net>
Cc: Douglas Schilling Landgraf <dougsland@gmail.com>,
linux-media@vger.kernel.org
Subject: Re: Trouble building v4l-dvb
Date: Fri, 17 Sep 2010 19:33:11 +0200 [thread overview]
Message-ID: <1284744791.1670.11.camel@sofia> (raw)
In-Reply-To: <4C93364C.3040606@hoogenraad.net>
Thanks for all help so far.
I managed to figure out the firetv problem as soon as I discovered
the .myconfig file.
Including the drivers from Sandberg, for the rtl2832 chip and adding
some lines to Makefile, Kconfig and .myconfig it compiles and install.
Modules load and Me-TV starts, quality is poor with the small antenna.
However, there is no audio. Not even for the DAB radio channels.
Maybe this is Me-TV problem?
The version supplied with Easy Peasy Ubuntu 9.10 is old, 0.7.16.
Regards,
Ole W. Saastad
fr., 17.09.2010 kl. 11.35 +0200, skrev Jan Hoogenraad:
> I see that the build now succeeded.
>
> Ole: this is something that should have been fixed a long time ago, but
> isn't.
> make allyesmod
> should set only those divers that do actually compile.
> Unfortunately, the FIREDTV driver has bugs for as long as I remember.
>
> In the 4vl directory, edit .config
> and change the line
> CONFIG_DVB_FIREDTV=m
> into
> CONFIG_DVB_FIREDTV=n
>
> It should compile fine then.
>
> Jan Hoogenraad wrote:
> > Douglas;
> >
> > Could you please check your last putback ?
> >
> > the build is broken.
> >
> > see:
> > http://www.xs4all.nl/~hverkuil/logs/Wednesday.log
> >
> > and the mail
> > [cron job] v4l-dvb daily build 2.6.26 and up: ERRORS
> >
> > Yours,
> > Jan
> >
> > Ole W. Saastad wrote:
> >> Trouble building v4l-dvb
> >> Asus eee netbook, running EasyPeasy.
> >>
> >> ole@ole-eee:~$ cat /etc/issue
> >> Ubuntu 9.04 \n \l
> >> ole@ole-eee:~$ uname -a
> >> Linux ole-eee 2.6.30.5-ep0 #10 SMP PREEMPT Thu Aug 27 19:45:06 CEST 2009
> >> i686 GNU/Linux
> >>
> >> Rationale for building from source: I have bought a USB TV with mpg4
> >> support from Sandberg, Mini DVB-T
> >> dongle. I also received an archive with driver routines for this from
> >> Sandberg. These should be copied into the v4l-dvd three and just rebuild
> >> with make.
> >> I have installed the kernel headers:
> >> apt-get install mercurial linux-headers-$(uname -r) build-essential
> >>
> >> Then I have downloaded the v4l-dvb source (assuming this is a stable
> >> release): hg clone http://linuxtv.org/hg/v4l-dvb
> >>
> >>
> >> I wanted to try to build before applying the patch from Sandberg.
> >> Issuing make yield the following :
> >>
> >> LIRC: Requires at least kernel 2.6.36
> >> IR_LIRC_CODEC: Requires at least kernel 2.6.36
> >> IR_IMON: Requires at least kernel 2.6.36
> >> IR_MCEUSB: Requires at least kernel 2.6.36
> >> VIDEOBUF_DMA_CONTIG: Requires at least kernel 2.6.31
> >> V4L2_MEM2MEM_DEV: Requires at least kernel 2.6.33
> >> and a few more lines....
> >>
> >> Ignoring these and just continuing :
> >>
> >> CC [M] /home/ole/work/v4l-dvb/v4l/firedtv-dvb.o
> >> CC [M] /home/ole/work/v4l-dvb/v4l/firedtv-fe.o
> >> CC [M] /home/ole/work/v4l-dvb/v4l/firedtv-1394.o
> >> /home/ole/work/v4l-dvb/v4l/firedtv-1394.c:22:17: error: dma.h: No such
> >> file or directory
> >> /home/ole/work/v4l-dvb/v4l/firedtv-1394.c:23:21: error: csr1212.h: No
> >> such file or directory
> >> /home/ole/work/v4l-dvb/v4l/firedtv-1394.c:24:23: error: highlevel.h: No
> >> such file or directory
> >> and many many more similar errors.
> >>
> >> After some time the make bails out.
> >>
> >>
> >> I assume this have some connection with the 9.04 being too old.
> >>
> >> Hints ?
> >>
> >>
> >>
> >> Regards,
> >> Ole W. Saastad
> >>
> >>
> >>
> >>
> >> --
> >> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> >> the body of a message to majordomo@vger.kernel.org
> >> More majordomo info at http://vger.kernel.org/majordomo-info.html
> >>
> >
> >
>
>
next prev parent reply other threads:[~2010-09-17 17:33 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-09-14 19:38 Trouble building v4l-dvb Ole W. Saastad
2010-09-16 17:07 ` Jan Hoogenraad
2010-09-17 9:35 ` Jan Hoogenraad
2010-09-17 10:50 ` Mauro Carvalho Chehab
2010-09-17 11:08 ` Jan Hoogenraad
2010-09-17 14:49 ` Mauro Carvalho Chehab
2010-09-17 15:00 ` Devin Heitmueller
2010-09-17 15:08 ` Mauro Carvalho Chehab
2010-09-17 15:27 ` Jan Hoogenraad
2010-09-26 16:18 ` Jan Hoogenraad
2010-09-27 4:08 ` Mauro Carvalho Chehab
2010-09-27 18:41 ` updated make_kconfig.pl for Ubuntu Jan Hoogenraad
2010-09-27 19:12 ` Mauro Carvalho Chehab
2010-09-27 20:45 ` Jan Hoogenraad
2010-09-27 22:43 ` Mauro Carvalho Chehab
2010-09-28 17:48 ` Jan Hoogenraad
2010-09-28 18:21 ` Mauro Carvalho Chehab
2010-09-28 19:58 ` Jan Hoogenraad
2010-09-29 21:49 ` patches for the Realtek rtl2831 Jan Hoogenraad
2010-09-17 17:33 ` Ole W. Saastad [this message]
2010-09-17 17:58 ` rtl2832 chip driver Jan Hoogenraad
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1284744791.1670.11.camel@sofia \
--to=olewsaa@online.no \
--cc=dougsland@gmail.com \
--cc=jan-conceptronic@hoogenraad.net \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox