From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail-wy0-f174.google.com ([74.125.82.174]:38670 "EHLO mail-wy0-f174.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755949Ab0JJAIw (ORCPT ); Sat, 9 Oct 2010 20:08:52 -0400 Received: by wyb28 with SMTP id 28so2083340wyb.19 for ; Sat, 09 Oct 2010 17:08:51 -0700 (PDT) Subject: rtl2831-r2 still not working for Compro VideoMate U80 From: Ugnius Soraka Reply-To: spam.ugnius40@gmail.com To: linux-media@vger.kernel.org Content-Type: text/plain; charset="UTF-8" Date: Sun, 10 Oct 2010 01:07:26 +0100 Message-ID: <1286669246.3990.44.camel@linux-efue.site> Mime-Version: 1.0 Content-Transfer-Encoding: 7bit List-ID: Sender: Hi, I'd like to get in touch with driver developers, is there any way I could help make RTL2831U driver work with Compro VideoMate U80. I would like to actively participate. My programming skills are well below required to write kernel modules, so I know I would be no use there. But anything else, testing with VideoMate U80, sending debug logs, I think I could do that. I've tried http://linuxtv.org/hg/~jhoogenraad/rtl2831-r2 driver, it looked promising. U80 device was recognised as VideoMate U90, /dev/dvb entries were created. But when scanning it says there's no signal. Debug gives TPS_NON_LOCK, Signal NOT Present, rtd2830_soft_reset, etc. (I could post message log, if it's any use to somebody). U80 has a led which (on windows) shows if TV stick is tuned in and working, when scanning on linux it's always on. I've also tried to compile http://linuxtv.org/hg/~anttip/rtl2831u/ but for now it's based on old dvb tree and seems to be incompatible with new kernels (mine 2.6.34.7-0.3). Is anttip driver supposed to be included in kernel, but it looks like development is going slow. Thank you, Ugnius